Configure CoS Settings on the RV110W

Available Languages

Download Options

  • PDF     (120.5 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (159.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (93.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2454

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configure CoS Settings on the RV110W

Objectives

A class of service (COS) defines limits and permissions for using Cisco Unity. You can map Class of Service (CoS) priority settings to the traffic forwarding queue on the RV110W.

The objective of this document is to explain how to configure CoS Settings on the RV110W.

Applicable Devices

  • RV110W

CoS Settings

Step 1. From the web-based configuration utility, choose QoS > CoS Settings. The CoS Setting page opens.

Step 2. For each CoS Priority, choose a priority value from the respective Traffic Forwarding Queue drop-down list.

Step 3. Click Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco