Configure QoS Port Based Settings on the RV110W, RV120W, and RV220W

Available Languages

Download Options

PDF (306.1 KB)
View with Adobe Reader on a variety of devices
ePub (349.0 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (148.5 KB)
View on Kindle device or Kindle app on multiple devices

Updated:November 29, 2018

Document ID:SMB2344

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configure QoS Port Based Settings on the RV110W, RV120W, and RV220W

Objectives

Each port can be configured on the device for QoS LAN settings using different priority levels for network traffic.

This document explains how to configure QoS port based settings on the RV110W, RV120W, and RV220W.

Applicable Devices

• RV110W

• RV120W

• RV220W

QoS Port Based Settings

Step 1. In the GUI choose QoS > QoS Port Based Settings.

Step 2.For each port choose an option from the Trust Mode drop-down list.

• Port — Enables port based QoS. This allows traffic priority for a particular port.

• DSCP — Differentiated Services Code Point (DSCP). This prioritizes the network traffic across LAN based DSCP queue mapping on the DSCP Settings page.

• CoS — Class of Service (CoS).