Configure Port Mirror on the RV110W

Available Languages

Download Options

  • PDF     (114.5 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (152.3 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (87.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2343

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configure Port Mirror on the RV110W

Objectives

Port mirroring monitors network traffic by sending copies of all incoming and outgoing packets from one port to a monitoring port.

The objective of this document is to show you how to mirror ports on the RV110W.

Applicable Devices

• RV110W

Port Mirroring

Step 1. In the GUI choose Administration > Diagnostics > Port Mirroring.

Step 2. Check the check boxes of the ports that will be mirrored from the Mirror Source column of the Mirror Configuration table.

Step 3. Choose the port that will be the mirror From the Mirror Port drop-down list, .

Step 4. Click Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco