View Connected Devices on an RV Series Router

Available Languages

Download Options

  • PDF     (104.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (186.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (145.8 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2342

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Objective

The Connected Devices section of an RV Series router displays the Host Name, Internet Protocol (IP) Address, Media Access Control (MAC) Address, and Status of the devices connected to your RV Series router. It is displayed per Virtual Local Area Network (VLAN) making it a lot easier to determine which devices are connected to which port on the router. The Connected Devices section is typically used by the administrator to check the connectivity between a host and the router among others and allows you to see if unauthorized devices are on the network.

This article aims to show you how to view connected devices on RV Series routers.

Applicable Devices | Firmware Version

View Connected Devices

Step 1. Access the web-based utility and choose Status and Statistics > Connected Devices.

Note: The images on this article are taken from the RV132W router. Options and terminologies may vary depending on the model of your device.

Note: If you are using the RV110W, RV130, or RV130W, go to Status > Connected Devices.

Step 2. Choose an option from the Filter: Interface Type matches drop-down list.

The options are:

  • All — displays the Hostname, IP Address, MAC Address, and Type of the devices connected both wired and wirelessly to the router.
  • Wireless — displays the Hostname, IP Address, MAC Address and Type of the devices connected to the router wirelessly.
  • Wired — displays the Hostname, IP Address, MAC Address, and Type of the devices connected to the Ethernet interface of the router.
  • WDS – This feature is available on the RV110W router. It shows devices connected to the Wireless Distribution System (WDS).

Note: In this example, Wired is chosen.

Another option would be

You should now have viewed the connected devices of your RV Series router.

Revision History

Revision Publish Date Comments
1.0
11-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco