The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Wi-Fi Protected Setup (WPS) is a quick way to establish a secure wireless network. The objective of this article is to explain how to configure WPS Settings on the RV110W.
Step 1. Use the Router configuration utility to choose Wireless > WPS.
Step 2. From the SSID drop-down menu, choose a wireless network to apply WPS to.
Step 3. To the right of WPS, check the Enable checkbox to enable WPS settings.
Step 4. Perform one of the three options to add a client device to the network.
• Option 1. If the client has a WPS button, press the button. Click the WPS icon.
• Option 2. If the client device has a WPS PIN number, enter the PIN number in the field in option 2 field. Click Register.
• Option 3. The client requests for the Router's PIN number. The client enters the number 61443143 in the client device.