Reboot and Reset to Factory Default Settings on the RV132W and RV134W

Available Languages

Download Options

  • PDF     (207.5 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (213.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (269.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:June 19, 2019
Document ID:1560891584319525

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

A reboot shuts down and restarts a router loading a saved configuration in the process. This process is performed when certain changes in the settings require a reboot or if the router is not responding or booting up properly.

If a reset to factory default settings is performed, all configuration settings that have been modified by the user are erased, and the device returns to its original settings. This can be helpful if you forget the password for the router and wish to regain access.

The objective of this article is to explain how to reboot and reset to factory default settings on a RV132W or RV134W router.

Applicable Devices

  • RV132W

  • RV134W

Software Version

  • 1.0.1.12 (RV132W)

  • 1.0.1.17 (RV134W)

Rebooting the Device

Reboot using Graphical User Interface (GUI)

Step 1. Log in to the web configuration utility page of the router.

Step 2. Choose Administration > Reboot.

C:\Users\kriselva\Desktop\Pole Position\WEM Publishing\Reboot and Reset RV132W-RV134W\Reboot-and-Reset-to-Factory-Default-Settings-on-the-RV132W-RV134W-Step2.png

Step 3. Choose Reboot the device option by selecting the radio button next to it. Click Reboot.

C:\Users\kriselva\Desktop\Pole Position\WEM Publishing\Reboot and Reset RV132W-RV134W\Reboot-and-Reset-to-Factory-Default-Settings-on-the-RV132W-RV134W-Step3.png

You will see the following screen when rebooting is in process.

C:\Users\kriselva\Desktop\Pole Position\WEM Publishing\Reboot and Reset RV132W-RV134W\Reboot-and-Reset-to-Factory-Default-Settings-on-the-RV132W-RV134W-Step4.png

Step 4. You will be logged out once the reboot is completed. Log in to the router with the saved administration credentials.

Hardware Reboot

Step 1. Press the power button to turn off your device. After 15 seconds have passed, press the power button a second time to power the device back on.

Step 2. After the reboot is completed, login with the saved administration credentials.

Reset to Factory Default Settings

The router can be reset to the factory default settings through either the web configuration utility or the reset button on the router.

Note: During a restore operation, do not try to go online, turn off the router, shut down the PC, or use the router until the operation is complete. This should take about one minute. When the test light turns off, wait a few more seconds before using the router.

Reset using GUI

Step 1. Log in to the web configuration utility and choose Administration > Reboot.

C:\Users\kriselva\Desktop\Pole Position\WEM Publishing\Reboot and Reset RV132W-RV134W\Reboot-and-Reset-to-Factory-Default-Settings-on-the-RV132W-RV134W-Step2.png

Step 2. Choose Return to factory default settings after reboot option by selecting the radio button next to it. Click Reboot.

C:\Users\kriselva\Desktop\Pole Position\WEM Publishing\Reboot and Reset RV132W-RV134W\Reboot-and-Reset-to-Factory-Default-Settings-on-the-RV132W-RV134W-Step5.png

You will see the following screen when rebooting is in process.

C:\Users\kriselva\Desktop\Pole Position\WEM Publishing\Reboot and Reset RV132W-RV134W\Reboot-and-Reset-to-Factory-Default-Settings-on-the-RV132W-RV134W-Step4.png

Step 3. You will be logged out once the reboot is completed. Log in to the router with the saved administration credentials.

Hardware Reset

Step 1. Press the Reset button located on the device with a pin for approximately 15 seconds or until the power light on the front of the device starts flashing. The router reloads and is set to the default configuration settings.

Step 2. Log in with the default credentials. The default username is cisco and the default password is cisco.

You have now learned the steps to reboot or return to factory default settings after reboot using the GUI or hardware of a RV132W or RV134W router.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco