Cisco FM 3200 BASE Data Sheet
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The End-of-Sale and End-of-Life of the Cisco FM product line has been announced. The Catalyst IW9165 and IW9167 Series are the recommended replacements.
The Cisco FM3200 Base is part of the Cisco Ultra-Reliable Wireless Backhaul portfolio. It is a high-performance radio transceiver, designed for fast, reliable backhaul of mission-critical video, voice and data.
The FM3200 Base is used to create point-to-point, point-to-multipoint, mesh and mobility networks with a throughput of up to 150 Mbps. Its was specifically designed to work as a base station within point-to-multipoint network architectures. However, it can also connect to networks in point-to-point or mesh modes, if greater area coverage is needed.
Vertical markets in which the FM3200 Base can be exploited include - but are not limited to - smart cities, schools, government organizations and universities, highly reliable emergency voice communications, and video surveillance. The FM3200 Base can also be used as a distribution-layer base station in mining applications, and as a video-surveillance backbone in intermodal yards.
Reduce the cost of network ownership by selecting the amount of throughput you need
Limit the cost of network ownership with FluidThrottle by selecting only the amount of throughput required. More throughput can be easily achieved by upgrading the system with software plug-ins when traffic requirements increase.
Prodigy 2.0 for reliable mission-critical applications
Our Multiprotocol Label Switching (MPLS)-based transmission protocol is built to overcome the limits of standard wireless protocols and to deliver an infrastructure with a higher level of reliability. At the base of our innovative transmission protocol is a traffic optimization algorithm that allows every Cisco FM radio to assign a specific level of priority and reliability to every packet transmitted. The result is a better, more reliable, multiservice wireless infrastructure.
Web interface configures, monitors, and troubleshoots the wireless network
The Cisco FM3200 Base includes the FMQuadro web interface, which allows you to configure, monitor, and troubleshoot the wireless network in real time, without any additional software. To simplify the configuration of the wireless network, the radio has a built-in spectrum analyzer and a real-time bandwidth monitoring tool.
Your investment is protected
Your investment is safe when business needs change. With FluidMAX, you don’t have to replace your radios when you change the network’s architecture from point-to-point to point-to-multipoint or mesh. The Cisco FM3200 Base can operate in CSMA or TDMA.
Works with FLUIDITY, our unique mobility solution
The Cisco FM3200 Base supports FLUIDITY, the ultimate broadband connectivity solution for high-speed vehicles and trains. Providing up to 100 Mbps of usable throughput to vehicles traveling up to 225 mph/360 kmh is now a reality.
There is no handoff time with FLUIDITY: thanks to the seamless “make before break” handoff, it maintains persistent network sessions and streams for any type of traffic.
Easy installation
The Cisco FM3200 Base has a compact form factor to minimize the impact of the installation.
To facilitate installation, it has an easy NPT-1 thread for conduit. The screws, located at the bottom, are self-retaining. The visible LEDs help you monitor the LAN activity and the strength of the radio. The PoE injector enables easy setup.
Rugged die-cast aluminum housing
Specific for harsh environments and long-lasting performance. Co-location interference protection shroud
FluidThrottle
Select only the throughput you need
Prodigy 2.0
MPLS transmission protocol with intelligent QoS
FMQuadro
Web-based interface to easily configure, monitor, and troubleshoot the network
FluidMAX
Change the network’s architecture, not the radios
FLUIDITY
Connectivity solution for high-speed vehicles and trains
Multiple frequencies
4.9 GHz and 5.1 to 5.8 GHz
Ethernet port
802.3af PoE Gigabit
Easy install
NPT-1 threaded cable gland for conduit direct mounting
| System |
||
| Chipset |
CPU RF |
600 MHz MIPS Network processor MIMO 2x2 |
| Interfaces |
|
1x 10/100/1000 Tx-RJ45 1x 10/100 Base Tx-RJ45 1x Reset button for factory default |
| LED |
|
1x Power 1x Ethernet 1 1x Ethernet 2 4x RSSI |
| Weight/dimensions |
|
80 oz / 2.2 kg 16(H) x 7(W) x 8(D) in. 400 (H) x 180(W) x 200(D) mm |
| Radio |
|
| Operating frequencies |
5150 to 5350 / 5470 to 5850 MHz 4940 to 4990 MHz |
| Data rate |
6/9/12/18/24/36/48/54 Mbps 30/60/90/120/180/240/270/300 Mbps |
| Modulation |
OFDM (BPSK,QPSK,16QAM,64QAM) |
| Channel width |
5/10/20/40 MHz |
| Output power*(dBm) |
Up to 27 |
| Antenna type |
Sector 2x2 MIMO |
| Antenna gain |
18 dBi |
| Horizontal beamwidth coverage |
120 deg |
| Vertical beamwidth coverage |
10 deg |
| Power method |
48V active 802.3af PoE 48V passive PoE |
| Power supply (included) |
48V/0.5A PoE |
| Max power consumption |
8W |
| Environmental |
|
| IP rating |
IP 66 |
| Enclosure |
Die-cast metal aluminum |
| Mounting |
Pole mounting kit included |
| Operating temperature |
-40° to 75°C -40° to 167°F |
| Shock and vibration |
ETSI300-019-1.4 |
| Operating humidity |
5% to 95% noncondensing |
| Wind survivability |
216 kmh (134 mph) |
| Expected throughput** |
||
| Throughput (Mbps) |
Max distance (miles) |
Max distance (km) |
| 150 |
1 |
1.6 |
| 120 |
1.5 |
2 |
| 100 |
2 |
3 |
| 60 |
2.5 |
4 |
| 30 |
3 |
5 |
| Communication protocols |
|
| Prodigy 1.0 and 2.0 |
Yes |
| Approvals |
FCCPart 15.B, FCC Part 15.C, FCC Part 15.E, NII/RSS-210 Annex 9, FCC Part 90y, OET 65 MPE/RSS102, EN893+DFS, EN301189-1 EN5502224, EN 62311, EN 60950, IC RS2010, CE, ROHS |
| Security |
|
| VPN / L2TP |
AES optional |
| Full compatibility with AES, 3DES, RSA, HTTPS, SSL |
Yes |
| AES link-level encryption |
Yes |
| Network |
|
| Protocols |
UTP, TCP, IP, RTP, RTCP,RTSP, HTTP, HTTPS, ICMP, ARP |
| Web-based interface |
Yes |
| Multicast support |
Yes |
| UPnP support |
Yes |
| SNMP support |
Yes |
| 802.1Q VLAN support |
Yes |
| Warranty |
|
| 2 years |
Limited on parts and labor |
| 3 years |
Optional |
| 5 years |
Optional |
FM3200B (Base)
● Base radios come pre-configured with PtP or PtMP throughput support up to 15Mbps
● Can be upgraded once purchased between PtP, PtMP, and Fluidity Licensing as detailed below:
|
|
Cisco FM3200 Base: Plugin and License Summary |
||
| Type of Plugin or License |
Fluidmesh Part Numbers |
Cisco PIDs |
Description |
| Hardware P/N |
FM3200B-HW |
FLMESH-HW-3200-1 |
Cisco FM3200 Base, single MIMO radio device, up to 15 Mbit/s Ethernet Throughput, 4.9-5.8 GHz with integrated 120 deg sector antenna. Two (2) Ethernet Ports. Does not include fluidcare support plan. |
| FLMESH-HW-3200-1NA |
NAM/LAM version |
||
| FLMESH-HW-3200-1UK |
UK version |
||
| FLMESH-HW-3200-1 |
Rest of the World version |
||
| Point-to-Multipoint (PtMP) Master |
FM3200-30 |
L-FLMESH-3200-13 |
Enable up to 30 Mbit/s ethernet througput in FM3200 Devices for fix backhaul |
| FM3200-60 |
L-FLMESH-3200-1 |
Enable up to 60 Mbit/s ethernet througput in FM3200 Devices for fix backhaul |
|
| FM3200-UN |
L-FLMESH-3200-12 |
Enable up to UNLIMITED ethernet throughput (up to 150 Mbit/sec) in FM3200 Devices |
|
| Point-to-Point (PtP) |
FM3200-PTP-UN |
L-FLMESH-3200-19 |
Enable up to UNLIMITED (up to 150 Mbit/s) Ethernet throughput in FM3200 for Point to Point ONLY |
| Point-to-Multipoint (PtMP) Client |
FM3200-PMCL-30 |
L-FLMESH-3200-16 |
Enable up to 30 Mbps Ethernet throughput in FM3200 for Point to Multipoint Client Use ONLY |
| FM3200-PMCL-60 |
L-FLMESH-3200-17 |
Enable up to 60 Mbps Ethernet throughput in FM3200 for Point to Multipoint Client Use ONLY |
|
| FM3200-PMCL-UN |
L-FLMESH-3200-18 |
Enable UNLIMITED (Up to 150 Mbps) Ethernet throughput in FM3200 for Point to Multipoint Client Use ONLY |
|
| Fluidity Licensing: Mobile |
FM3200-MOB-MOB-5 |
L-FLMESH-3200-6 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode up to 5 Mbit/sec |
| FM3200-MOB-MOB-10 |
L-FLMESH-3200-2 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode up to 10 Mbit/sec |
|
| FM3200-MOB-MOB-15 |
L-FLMESH-3200-3 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode up to 15 Mbit/sec |
|
| FM3200-MOB-MOB-20 |
L-FLMESH-3200-4 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode up to 20 Mbit/sec |
|
| FM3200-MOB-MOB-30 |
L-FLMESH-3200-5 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode up to 30 Mbit/sec |
|
| FM3200-MOB-MOB-60 |
L-FLMESH-3200-14 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode up to 60 Mbit/sec |
|
| FM3200-MOB-MOB-UN |
L-FLMESH-3200-7 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Mobile-Unit-Mode Unlimited (Up to 100 Mbit/sec) |
|
| Fluidity Licensing: Trackside |
FM3200-MOB-TRK-15 |
L-FLMESH-3200-8 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Infrastructure Mode up to 15 Mbit/sec |
| FM3200-MOB-TRK-20 |
L-FLMESH-3200-9 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Infrastructure Mode up to 15 Mbit/sec |
|
| FM3200-MOB-TRK-30 |
L-FLMESH-3200-10 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Infrastructure Mode up to 30 Mbit/sec |
|
| FM3200-MOB-TRK-60 |
L-FLMESH-3200-15 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Infrastructure Mode up to 60 Mbit/sec |
|
| FM3200-MOB-TRK-UN |
L-FLMESH-3200-11 |
Fluidity Plug-in enable FLUIDITY Fast-roaming Option Infrastructure Mode Unlimited (up to 100 Mbit/sec) |
|
| General Licenses |
FM-AES |
L-FLMESH-ENCR-1 |
AES Plug-in. Enables One plug-in is required for each hardware device where encryption is desired. ECCN 5D002 (Export Licensed Required to be exported in certain countries; no license required to be sold in North America and in the European Union). |
| FM-TITAN |
L-FLMESH-TITAN-1 |
TITAN Plug-in. Enables Fast Failover in case of network, radio or power failure on a single Fluidmesh product. All Fluidmesh devices in a network mush have a plugin-in to operate. |
|
| FM-PROFINET |
L-FLMESH-PROFINET |
PROFINET Plug-in. Enables support to Layer 2 ethertype 0x8892 on one Fluidmesh product. It requires also QoS support and the VLAN plug-in. All Fluidmesh hardware devices in a network must have these plug-ins to operate. |
|
| FM-VLAN |
L-FLMESH-VLAN-1 |
VLAN Plug-in. Enables port-based and MAC address-based VLANs on a single Fluidmesh product. All Fluidmesh hardware devices in a network must have a plug-in for VLAN to operate. |
|
| FM-QNET |
L-FLMESH-QNET |
QNET Plug-in. Enables support to Layer 2 ethertype 0x8204 on one Fluidmesh product. All Fluidmesh hardware devices in a network must a plug-ins to operate. |
|
| FM-CANBUS |
L-FLMESH-CANBUS |
CANBUS Plug-in. Enables CANBUS Support on Fluidmesh radios. All Fluidmesh devices in a network must have these plugin-ins to operate. |
|
Information about Cisco’s Environmental, Social and Governance (ESG) initiatives and performance is provided in Cisco’s CSR and sustainability reporting.
Table 1. Cisco environmental sustainability information
| Sustainability Topic |
Reference |
||
| General |
Information on product-material-content laws and regulations |
||
| Sustainability Inquiries |
Contact: csr_inquiries@cisco.com |
||
| Countries and Regions Supported |
Table: Regulatory compliance |
||
| Power |
Power (Including Pluggable) |
Table : Electrical |
|
| Material |
Product packaging weight and materials |
Contact: environment@cisco.com |
|
| Weight |
Table: Physical |
||
| Recycled Content |
Pre-consumer |
0.57% |
Contact: csr_inquiries@cisco.com |
| Post-consumer |
1.87% |
||
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.