EOL7098 - Amended
Cisco announces the end-of-sale and end-of-life dates for the Cisco ONS 15454/E MSPP and MSTP Fan Tray Assembly ANSI Version 3 and ETSI Version 48V. The last day to order the affected product(s) is May 7, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco ONS 15454/E MSPP and MSTP Fan Tray Assembly ANSI Version 3 and ETSI Version 48V
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
May 7, 2010 |
End-of-Sale Date |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
May 7, 2011 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
August 5, 2011 |
End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
May 6, 2012 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
May 6, 2012 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
August 5, 2015 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
May 31, 2016 |
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product PartNumber |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
15454-10G-KIT-1 |
Includes 2ea TCC2P, XC-VXC-10G, 1ea FTA3-T AND SW RTU LIC |
15454-10G-KIT-2 |
Includes 2ea TCC2P, XC-VXC-10G, 1ea CC-FTA AND SW RTU LIC |
- |
15454-1SA-CABMOD1= |
CISCO 15454 SCHROFF DS1, DS3, ETHERNET, ALARM PANEL |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-CABMOD2= |
CISCO 15454 SCHROFF DS1, DS3, E-NET, ALARM PANEL, w/Sp Rptr |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-CABMOD3= |
CISCO 15454 SCHROFF DS3, ETHERNET, ALARM PANEL |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-CABMOD4= |
DO NOT USE CISCO 15454 SCHROFF DS1, ETHERNET, ALARM PANEL, |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-CABMOD5= |
DO NOT USE-CISCO 15454 SCHROFF DS1, ETHERNET, ALARM PANEL |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-DS1 |
Bay w/Shelf, EIA-BNC-B48, Blank, and FTA3-T |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-DS1DS3 |
Bay w/Shelf, EAI-AMP-A84, EIA-BNC-B48, and FTA3-T |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-1SA-DS3 |
CPREM 15454 DS3 Bay Assembly |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-FTA-OPTIONS |
Fan Tray Assembly Options |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454-FTA3-T |
Shelf Fan Tray Assembly,ANSI,15454, HPCFM, I-Temp |
15454-CC-FTA |
Shelf Controlled Cooling Fan Tray, ANSI, HPCFM, I-Temp |
- |
15454-FTA3-T= |
Shelf Fan Tray Assembly,ANSI,15454, HPCFM, I-Temp |
15454-CC-FTA= |
Shelf Controlled Cooling Fan Tray, ANSI, HPCFM, I-Temp |
- |
15454-SA-HD-DDR2 |
15454 KIT- 1 EA SA HD,SA DD KIT, FTA3-T, ESD FRONT |
15454-SA-HD-DDR3 |
15454 KIT- 1 EA SA HD,SA DD KIT, CC-FTA, ESD FRONT |
- |
15454-SHELF-KIT |
Includes 1ea SA-ANSI, FTA3-T, and EIA-BNC-A48 |
See the Product Migration Options section below for detailed information on replacing this product. |
||
15454E-FTA-48V |
ONS 15454 SDH 48V Fan Tray with filter for ETSI Chassis |
15454E-CC-FTA |
48V Controlled Cooling Fan Tray with filter for ETSI Chassis |
- |
15454E-FTA-48V= |
ONS 15454 SDH 48V Fan Tray with filter for ETSI Chassis |
15454E-CC-FTA= |
48V Controlled Cooling Fan Tray with filter for ETSI Chassis |
- |
Product Migration Options
Customers are encouraged to migrate to the Cisco Controlled Cooling Fan Tray Assembly, or CC-FTA. Information about this product can be found at: http://www.cisco.com/en/US/docs/optical/spares/15454/sonet/guides/454fan.html.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco ONS 15454/E MSPP and MSTP Fan Tray Assembly ANSI Version 3 and ETSI Version 48V through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For More Information
For more information about the Cisco ONS 15454 MSPP and MSTP Controlled Cooling Fan Tray Assembly, visit http://www.cisco.com/en/US/docs/optical/spares/15454/sonet/guides/454fan.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.