End-of-Sale and End-of-Life Announcement for the Cisco ACE Application Control Engine ACE10 Module
PDF(137.2 KB) View with Adobe Reader on a variety of devices
Updated:June 1, 2011
Cisco announces the end-of-sale and end-of life dates for the Cisco ACE Application Control Engine ACE10 Module. The last day to order the affected product(s) is March 1, 2012. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Cisco sales teams and channel partners are encouraged to transition their Cisco ACE10 module sales from their current ACE10 installed base to the Cisco ACE30 module. The Cisco ACE30 is one of the most advanced application switching devices in the industry. It offers a larger set of functionality and superior performance benefits than the ACE10. In addition to Layer 4 load balancing, Layer 7 content switching, SSL offloading, virtual devices, role-based administration, management through the Cisco Application Networking Manager 4.x, and the command-line interface, the Cisco ACE30 offers advanced features like HTTP compression and dynamic workload scaling. The ACE30 has twice the maximum SSL TPS performance at 30,000 transactions per second and 50 percent more Layer 4 connections per second than the ACE10. Similar to the ACE10, the ACE30 is available as a fully integrated solution with the Cisco Catalyst 6500 Series or Cisco 7600 Series.
Table 1. End-of-Life Milestones and Dates for the Cisco ACE Application Control Engine ACE10 Module
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
May 31, 2011
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
March 1, 2012
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
May 30, 2012
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
March 1, 2013
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
March 1, 2013
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
March 1, 2013
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
May 27, 2016
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
February 28, 2017
HW = Hardware OS SW = Operating System Software App. SW = Application Software
The Cisco ACE30 offers maximum limits of SSL offloading capability (up to 30,000 SSL transactions per second), virtualization (up to 250 virtual devices), and HTTP compression (up to 6 Gbps and limited by the throughput license) at all throughput license levels of 4 Gbps, 8 Gbps and 16 Gbps. There is software-license-based scalability between the throughput license levels, ensuring investment protection.
Table 2. Product Part Numbers Affected by This Announcement
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at
Customers may be able to continue to purchase the Cisco ACE Application Control Engine ACE10 Module through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
Service prices for Cisco products are subject to change after the product End of Sale date.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.