PDF(108.0 KB) View with Adobe Reader on a variety of devices
Updated:July 7, 2005
® PXM-1E Processor Switch Module enables the Cisco MGX 8830/B and Cisco MGX 8850/B Advanced ATM Multiservice Switch and Voice Gateway with 1.2-Gbps nonblocking standard PNNI switching capacity for cost-effective voice and data applications.
The Cisco MGX PXM-1E Processor Switch Module enables the Cisco MGX 8830/B and MGX 8850/B Advanced ATM Multiservice Switch and Voice Gateway with 1.2 Gbps non-blocking standard PNNI switching capacity for cost-effective voice and data applications. It has a functional, space, and cost-saving design that combines switch fabric, management control, and network interface ports into a single module. It shares the same management capabilities as the Cisco MGX 8800 Series Switches for proven reliability, interoperability, and manageability. Three variations of PXM-1E modules are available with interface speeds ranging from T1/E1 to OC-3/STM-1 to give flexibility in network design. The hot-swappable optical modules minimize initial cost for further capital savings.
Key Features and Benefits
• 1.2 Gbps nonlocking switching capacity: Provides cost-effective switching throughput to meet the demand of service aggregation and voice applications at the service provider's network edge. The module fully supports Hierarchical Private Network-to-Network Interface (PNNI) routing with Multiple Peer Group and mobile PNNI to allow Cisco MGX 8830 and 8850 switches to easily integrate with a large-scale PNNI network.
• Choices of interface speeds and density: The variety of Cisco MGX PXM-1E modules provides different choices of network interface speeds, interface combinations, and density to suit customer needs. Network architects can choose from the 16-port T1/E1 PXM-1E module, the 8-port OC-3/STM-1 module, or the 4-port OC-3/STM-1 and 8-port T3/E3 Combo PXM-1E module. The mix of T3/E3 and OC-3/STM-1 in a single module brings unprecedented flexibility for network connectivity.
• Individually replaceable optical modules: Offer a unique way to minimize network hardware down to the port level. This translates directly into cost savings. Add more optical modules to the 8-port OC-3/STM-1 or the Combo PXM-1E module for easy network expansion at low incremental cost.
• 1:1 redundancy and SONET/SDH Automatic Protection Switching (APS): All Cisco MGX PXM-1E module types support 1:1 redundancy to provide high availability of the switch fabric, control processor function, and network interfaces. This capability is essential for supporting mission-critical services. The optical OC-3/STM-1 interfaces also support SONET/SDH 1+1 APS for facility-failure protection. The added reliability helps service providers, government organizations, and enterprises to sustain reliable services to improve customer satisfaction and reduce support cost.
Table 1. Product Specifications
Cisco PXM1E-8-155, PXM1E-COMBO, and PXM1E-16-T1E1 modules for Cisco MGX 8850/B and 8850 switches
Cisco 8830-8-155, 8830-COMBO, and 8830-16-T1/E1 modules for Cisco MGX 8830/B and 8830 switches
Management Interface back card PXM-UI-S3/B
Minimum software: Cisco MGX Switch Software Version 5.1
Flexible interface choices offered by various PXM1E front/back card module types:
Cisco PXM1E-8-155 and 8830-8-155: 8 x OC-3c/STM-1. Each optical interface module is hot-swappable.
Cisco PXM1E-COMBO and 8830-COMBO: 8 x T3/E3 and 4 x OC-3/STM-1. Each optical interface module is hot-swappable.
Cisco PXM1E-16-T1E1 and 8830-16-T1E1: 16 x T1/E1 ports. Inverse Multiplexing over ATM (IMA) 1.0 and 1.1 are supported.
Cisco PXM-UI-S3/B back card: Used with any of the above cards for management interfaces, RJ-48 T1/E1 external timing interface, and DB-15 for visual and audible alarm interface.
SONET/SDH 1+1 APS and 1:1 card redundancy for Cisco PXM1E-COMBO, PXM1E-8-155, and PXM1E-4-155 modules and for the Cisco MGX 8830 equivalent
1:1 card redundancy for Cisco PXM1E-8-T3E3 and PXM1E-16-T1E1 modules and the Cisco MGX 8830 equivalent
Clock source from internal Stratum-3, primary and secondary external Building Integrated Timing Supply (BITS) interface, or derived from optical interfaces
ATM Forum UNI v3.0, v3.1, and v4.0; ITU-T I.361 and I.432; ILMI 4.0
Hierarchical Private Network-to-Network Interface (PNNI) V1.0 dynamic routing with Multiple Peer Group
Preferred Route, Closed User Group, priority bumping, connection grooming
AINI and IISP Interworking
Traffic Management v4.0 and ITU-T I.371, per ATM Forum UNI v3.1
Programmable enhanced connection admission control to admit connections based on quality of service
Constant bit rate (CBR), variable bit rate real time (VBR-rt), variable bit rate non-real time (VBR-nrt), unspecified bit rate (UBR), available bit rate (ABR-STD)
Up to 16 classes of service
Network Management interfaces
RJ-45 Ethernet port for management interface at the Cisco PXM-UI-S3/B back card, and in-band ATM connection to reach remote node for management connectivity. Miniature D serial port for Cisco IOS® Software control port. DB-15 for visual and audible alarm port. Command-line interface (CLI) for local management, Simple Network Management Protocol (SNMP) for network management system interface, Secure File Transfer Protocol (SFTP) for file transfer, and Secure Shell Versions 1 and 2 (SSHv1 and SSHv2) Protocol for remote access.
Height: 15.83 in. (40.2 cm)
Depth: 15.65 in. (39.8 cm)
DC input voltage range 42-56 VDC, maximum 30A and 1050W input
AC input voltage range 100-120 and 200-240 VAC, maximum 12A at 100VAC, 7A at 200VAC, 1200W input at frequency of 50-60Hz
Monitoring of cabinet temperature, cooling fan, and supply voltages. LED indicators for card status, network alarms, LAN control port activity, and power status.
FCC Class A / TIA-968-A
ICES 003 Class A
AS/NZS 3548 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-2: Power Line Harmonics
IEC/EN 61000-3-3: Voltage Fluctuations and Flicker