April 10, 1998
Products Affected
This document describes the release of Cisco IOS Release 11.2(13a), products affected, Cisco IOS versions affected, problem description, and symptoms of the defect requiring the release 11.2(13a).
Table 1: Products affected by 11.2(13a)
|
Cisco 7000 |
RSP7000 |
|
Cisco 7500 |
RSP1, RSP2, RSP4 |
Cisco IOS Versions Affected
Table 2: Affected Images
|
Major/ED Release |
Maintenance / Interims Affected |
Images Affected |
|---|---|---|
|
11.2 |
11.2(10.4) - 11.2(13) |
All RSP images |
No special order number is required to order the 11.2(13a) release. The existing product number for the 11.2(13) can still be used.
Problem Description
The solution for software defect CSCdj31419 (registered customers only) was improperly integrated in the 11.2 release. CSCdj94374 (registered customers only) resolves this issue and completes the integration for CSCdj31419. CSCdj94374 applies to 11.2 only. In all other releases, CSCdj31419 was correctly integrated.
Note:?This Field Notice supersedes the 11.2(12) release notes regarding CSCdj31419 (registered customers only) .
Symptoms
Customers affected by CSCdj31419 or CSCdj94374 may have the system reload, symptom shown.
Below is a sample output of the show version command after the system has reloaded.
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-ISV-M), Version 11.2(11)P, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 06-Jan-98 05:55 by dschwart
Image text-base: 0x60010900, data-base: 0x60960000
ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTFLASH: RSP Software (RSP-BOOT-M), Version 11.2(11)P, RELEASE SOFTWARE (fc1)
router-1 uptime is 1 hour, 49 minutes
System restarted by bus error at PC 0x6018D528, address 0xEF4321D5
System image file is "slot0:/tftpboot/rsp-isv-mz.112-11.p.bin", booted via slot0
cisco RSP4 (R5000) processor with 32768K/2072K bytes of memory.
R5000 processor, Implementation 35, Revision 2.1 (512KB Level 2 Cache)
Last reset from power-on
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Chassis Interface.
4 EIP controllers (24 Ethernet).
2 AIP controllers (2 ATM).
1 FEIP2 controller (2 FastEthernet).
24 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
2 ATM network interface(s)
123K bytes of non-volatile configuration memory.
16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 7.
Configuration register is 0x102
Show stack console output
!--- Also shown in the output of the show tech command.
System was restarted by bus error at PC 0x60195A68, address 0xEF4321D5
RSP Software (RSP-JSV-M), Version 11.2(11)P, RELEASE SOFTWARE (fc1)
Compiled Tue 06-Jan-98 06:15 by dsmith (current version)
Image text-base: 0x60010900, data-base: 0x60B66000
Stack trace from system failure:
FP: 0x611887D0, RA: 0x60195A68
FP: 0x61188808, RA: 0x601698F8
FP: 0x61188820, RA: 0x6017CFB8
FP: 0x61188838, RA: 0x6017CFA4
Workarounds
There are no workarounds within the affected images. Integrate the solution described in the Solution section of this document.
Solution
To eliminate the problems mentioned in the preceding section, download and install one of the Cisco IOS software release updates listed in Table 3.
Table 3 : Cisco IOS Software Release Updates
|
Major/ED Release |
Maintenance Release |
Integrated by: |
Availability (CCO) |
|---|---|---|---|
|
11.2 |
11.2(13a) |
CSCdj94374 |
Friday, 4/10 |
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.