July 20, 2011
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Revision Date Comment 1.0 20-JUL-2011 Initial Public Release
Products Affected Comments 15600-TSC All HW Revs affected 15600-TSC= All HW Revs affected
15600-TSC loaded with SW R9.1 and greater can cause outage in 15600 systems running R6.0 to R9.0.x.
The problem is caused by bug (CSCtr48955). There is an inconsistency between software releases 6.0 to 9.0.x and R9.x in exchanging "sync-up" messages during "initialization." This causes 15600-TSC running R9.1 or greater to take over as Active when inserted into the STDBY card slot on systems running software releases 6.0-9.0.x which causes database loss.
Network outage due to a newly inserted standby 15600-TSC (running R9.1 or greater) in a 15600 system running R6.0 - R9.0.x.
For 15600 systems running R6.0-9.0.x, do not insert any 15600-TSC that has SW R9.1 or greater loaded on it into the Standby slot. Some 15600-TSC cards were shipped to customers with SW R9.1 pre-loaded on them. Cisco recommends customers do one of the following:
- Check hardware serial numbers against the serial number validation tools provided in this field notice.
- Check the software loaded on the card by plugging the 15600-TSC into a system not carrying any network traffic and if necessary down rev the 15600-TSC to R9.0 or lower.
How To Identify Hardware Levels
Customers can compare their hardware serial number against the serial number validation tool provided with this field notice or a use a 15600 system not carrying any network traffic to check the software release on the card. If the serial number validation tool indicated that the customer's hardware is affected or the inventory check in CTC reveals that SW R9.1 or greater is loaded on the card, Cisco recommends that you contact your account team for the best option to downgrade the 15600-TSC to SW R9.0 or lower.
To determine the serial number of your line cards:
- Open Cisco Transport Controller.
- From the Shelf View, choose Inventory.
- From the Inventory tab, locate the line card in question and compare the information from the Inventory tab. Compare the serial numbers against the serial number validation tool provided.
If you use TL1 commands:
Compare the information from the TL1 inventory command against the serial number validation tool provided.
A serial number validation tool has been provided so customers can easily check their hardware's serial number to identify affected units.
Serial Number Validation Tool
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.