June 2, 2006
NOTICE:
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Products Affected
|
Products Affected |
Comments |
|---|---|
|
Unity Express - 2.3.1 |
With Cisco Unified CallManager Express 3.2 and 3.3 |
Problem Description
When semi-attended and attended call transfers are done from Cisco Unity Express 2.3.1 with Cisco Unified CallManager Express 3.2 and 3.3, call transfer fails.
Background
In Cisco Unity Express 2.3.1, the default transfer mode is set to semi-attended transfer. During testing it was found that semi-attended and attended transfers do not work with Cisco Unified CallManager Express 3.2 and 3.3.
Cisco Unified CallManager Express version 3.4 and later versions do not exhibit this problem with Cisco Unity Express 2.3.1.
Cisco Unity Express 2.2 and prior versions only support blind transfer mode. There is no option to select semi-attended or attended transfers in these releases.
Problem Symptoms
Sometimes the call is not transferred to the destination or the transfer is done but the voice path is not through between the transferee and transfer-to party.
Scenario 1:
A makes call to AA.
AA transfers (semi-attended or attended) call to B.
B does not answer.
After no answer the call should go to Voicemail but the call does not get forwarded to Voicemail.
Scenario 2:
A makes call to AA.
AA transfers (semi-attended or attended) call to B.
B answers but there is no voice path between A and B.
Workaround/Solution
If this issue is seen, change the default transfer mode to blind (bye-also) using the following commands:
se-cue> conf t se-cue(config)> ccn subsystem sip se-cue(config-sip)> transfer-mode blind bye-also se-cue(config-sip)> end se-cue(config)> end
DDTS
To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.
|
DDTS |
Description |
|---|---|
|
CSCse26216 (registered customers only) |
When semi-attended and attended xfr are done from CUE, xfr fails in CME |
Revision History
|
Revision |
Date |
Comment |
|---|---|---|
|
1.0 |
02-JUN-2006 |
Initial Public Release |
NetPro Discussion Forums - Featured Conversations
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.