Cisco Unified MeetingPlace

May 18, 2004

Products Affected

Problem Description

Cannot establish a telnet or MeetingTime session after connecting to an M3 through the Modem. The Modem will accept data, but it does not transmit any data. This is caused by snmp trap messages sent to the modem that the modem does not expect to receive, thus placing it into an unknown state.

Problem Symptoms

Cannot troubleshoot the issue in a timely manner when this occurs.

Workaround/Solution

Apply the snmpd and snmpd.conf hot fix that is available in MeetingPlace software 5.1.0 version 5.1.0af and above, and MeetingPlace software 5.0.2 version 5.0.2y and above. Contact the MeetingPlace Technical Assistant Center to download.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

• Open a service request on Cisco.com
• By email
• By telephone

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.