Revised November 26, 2007
October 17, 2001
THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Firmware version 8.65 sets the power setting higher than the maximum level approved for Japan.
Previous firmware versions set the correct power levels. Version 8.65 sets the level to the maximum rather than capping it at the maximum allowed for Japan.
No failure symptoms will be seen as this is a compliance issue regarding power level settings.
A future release will be posted to CCO to resolve this issue, but until that is available, a previous version, such as 8.58, must be used instead.
Information on firmware upgrade/downgrade procedures can be found in the release note Release Notes for Cisco Aironet Workgroup - Upgrade Procedure.
To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.
Firmware sets power level wrong for Japan
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.