This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Saving the NSS2000's configuration
Access the web interface of the NSS2000. For instructions on how to access the web interface, click here .
Once logged in, click on Admin > Configuration. Select the RAID and Volume where the configuration will be saved to and restored from then click on Update.
Once the location has been selected, click on Save.
Restoring the NSS2000's configuration
After a configuration has been saved, click on Restore.
All the saved configurations will appear in the Configuration list. Click on Full Restore to upload the saved configuration.
The system will automatically reboot after a successful restore. Close the NSS2000's web interface if you're prompted to.
Log back in to the NSS2000's web interface and check System > Status if the configuration has been properly restored.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.