This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Q. How do I configure the Network Link IP of the NSS2050?A.
From the Manager Menu, click Network IP.
The Network IP page appears listing each interface.
Click Edit on the row of the interface you want to configure.
The Network Link Configuration page appears.
Select one of the following:
- Obtain IP Address Automatically: Use a DHCP server to retrieve the IP address,
netmask, and gateway address for the interface.
- Use the Following IP Address: Enter the IP configuration details manually for the IP
address, netmask, and gateway, in dotted-quad notation (i.e., set of four digits
separated by periods where each digit is in the range of 0-255).
Click Update for settings to take effect.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.