Document ID: 108664
Contents
Introduction
How do I get the wireless settings on my network?
Related Information
Introduction
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Q. How do I get the wireless settings on my network?
A.The wireless settings that you need to take note of are:
a.) SSID
b.) SSID Broadcast
c.) Wireless Security
To check the wireless settings on the Linksys router follow the steps below.
Checking the Wireless Settings on the Linksys Router
Step 1:
Access the router's web-based setup page. For instructions, click here.Step 2:
When the router's web-based setup page appears, click Wireless.
Step 3:
Look for Wireless Network Name (SSID). If it's still set to "linksys", change it to something unique and take note if Wireless SSID Broadcast is Enable or Disable.
Step 4:
Click the Wireless Security and take note of the current Security Mode.
If Security Mode is set to WEP:
If Security Mode is set to WPA:
Step 5:
Click
.
Related Information
| Updated: Dec 12, 2008 | Document ID: 108664 |