What are the advanced wireless settings that I can change on my wireless VOIP router and what do they do?
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.
Q. What are the advanced wireless settings that I can change on my wireless VoIP router and what do they do?A.
The Advanced Wireless Settings on a Cisco Small Business wireless router allows you to customize different options and optimize your wireless network's performance. However, Cisco Small Business does not recommend that you change the advance wireless settings of the router. The current settings have been configured in order to optimize the router's wireless performance.
Access the Advanced Wireless Settings
Access the router's web-based setup page. For instructions, click here.
When the router's web-based setup page appears, click Wireless > Advanced Wireless Settings.
The Advanced Wireless Settings window appears. Here are some details:
- Preamble Type
The preamble defines the length of the CRC block for communication between the router and the roaming network adapter. High network traffic areas should use the shorter preamble type.
- Authentication Type
The default is set to Auto, which allows either Open System or Shared Key authentication to be used. For Open System authentication, the sender and the recipient do not use a network key (wireless password) for authentication. For Shared Key authentication, the sender and recipient use a network key for authentication. If you want to use only a Shared Key authentication, select Shared Key.
- CTS Protection Mode
The default value is set to Auto. When set to Auto, a protection mechanism will ensure that your Wireless-B devices connects to the Wireless-G Router when many Wireless-G devices are present. However, the efficiency of your Wireless-G devices may decrease.
- Beacon Interval
This value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the router in order to keep the network synchronized.
- DTIM Interval
This value indicates the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing PC's in the network of the next window for listening to broadcast and multicast messages. The default value is set to one.
- Fragmentation Threshold
This value indicates how much of the router's resources are devoted to recovering packet errors. The default value is 2347 and should remain as such unless you encounter inconsistent data flow. In the event you encounter inconsistent data, only minor modifications are recommended.
- RTS Threshold
This value should remain at its default settings of 2346. Should you encounter inconsistent data flow, only minor modifications are recommended.
Note: The features may vary depending on the model number of your router.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.