Document ID: 48120
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Cisco PGW 2200 SimWriter
SimWriter Usage Example
NetPro Discussion Forums - Featured Conversations
Related Information
Introduction
While you create a dial plan and then test it out, there is no way to verify how a call runs through a dial plan on the Cisco PGW 2200. At this time, you need to make a test call and run a full MDL trace on the call. When you look at the traces, they are verbose and complicated to understand. For this reason, the SimWriter under the /opt/CiscoMGC/bin directory is an easier trace to understand. The Translation Verification tool provides you with a means to understand how calls are processed based on your system's dial plan. This tool creates a simulation of a call that is processed by the dial plan.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Components Used
The information in this document is based on the Cisco PGW 2200 SoftSwitch.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Cisco PGW 2200 SimWriter
In order to view the latest SimWriter help options, go to the /opt/CiscoMGC/bin directory and run either the SimWriter command or the simWriter –help command on the command line. The -help parameter provides you with the help description of each argument. This document only focuses on some of these arguments. If you want to use this in a graphical situation, run the MGC_Toolkit command under directory /opt/Toolkit/bin via X-windows. This contains a built in Translation Verification section. Also, use the SimWriter command.
Currently, when you issue the ./MGC_Toolkit command under the /opt/Toolkit/bin directory, you receive this information:
Select the Translation Verification option to display this window:
Table 1: SimWriter Help Output Information
|
Option String |
Argument |
Argument Type |
Description |
|---|---|---|---|
|
-tgnum |
Trunk Group Number |
4 digits |
This option is mandatory. It specifies the trunk group number that the call comes in on. The specified trunk group is then used to find out all the stored information about the customer and their preferences from the .dat files. |
|
-full |
<none> |
<none> |
Indicates to SimWriter and callver that a full trace is desired. Under this mode, a more detailed trace is printed. See the Callver Output section for a detailed description of this format. |
|
-diag |
<none> |
<none> |
Indicates to SimWriter and callver that a diagnostic trace is desired.Under this mode all the results are printed, but all the table information is left out. See the Callver Output section for a detailed description of this format. |
|
-isdpn |
ISDP Preference Enumerated Code |
Digits |
Specifies an ISDN preference to use while you select an outgoing route. This preference is the one that is included in the initial address message. There is an additional route preference that is picked up from the .dat files using the originating trunk group. The possible values are listed in Table 2. |
|
-cdnoa |
Nature of Address (NOA) of the Called Party |
Digits |
An enumerated number that represents the Called Party's NOA. This is the number that corresponds with the values of the NOAs in the Call Context. See Table 3 for NOA types and their integer values. |
|
-cdnpi |
Called Party's Numbering Plan Indicator (NPI) |
Digits |
An enumerated number that represents the NOA of the Called Party. This is the number that corresponds with the values of the NPIs in the Call Context. See Table 4 for NPI types and their integer values. |
|
-cdpn |
Called Party Number |
String of digits |
This is the Called Party Number. Currently, the dial plan only supports digits 0 through 9. Therefore, no hex digits are allowed. |
|
-cgnoa |
NOA of the Calling Party |
Digits |
An enumerated number that represents the NOA of the Calling Party. This is the number that corresponds with the values of the NOAs in the Call Context. |
|
-cgnpi |
NPI of the Calling Party |
Digits |
An enumerated number that represents the NOA of the Calling Party. This is the number that corresponds with the values of the NPIs in the Call Context. |
|
-cgpn |
Calling Party Number |
String of digits |
This is the Calling Party Number. Currently, the dial plan only supports digits 0 through 9. No hex digits are allowed. |
Table 2: Integer Values for ISDN
|
ISDN Type |
Integer Values |
|---|---|
|
CLASS_ISDN_PREFERRED |
0 |
|
CLASS_ISDN_NOT_REQUIRED DEFAULT |
1 |
|
CLASS_ISDN_REQUIRED |
2 |
Table 3: Integer Values for NOA
|
NOA Type |
Integer Value |
|---|---|
|
NOA_NONE |
1 |
|
NOA_UNKNOWN |
2 |
|
NOA_SUBSCRIBER |
3 |
|
NOA_NATIONAL |
4 |
|
NOA_INTERNATIONAL |
5 |
|
NOA_NETWORK |
6 |
|
NOA_MERIDIAN |
7 |
|
NOA_ABBR |
8 |
|
NOA_UNIQUE_3DIG_NAT_NUM |
9 |
|
NOA_ANI |
10 |
|
NOA_NO_ANI_RECD |
11 |
|
NOA_NON_UNIQUE_SUBSCRIBER |
12 |
|
NOA_NON_UNIQUE_NATIONAL |
13 |
|
NOA_NON_UNIQUE_INTERNATIONAL |
14 |
|
NOA_OPRREQ_TREATED |
15 |
|
NOA_OPRREQ_SUBSCRIBER |
16 |
|
NOA_OPRREQ_NATIONAL |
17 |
|
NOA_OPRREQ_INTERNATIONAL |
18 |
|
NOA_OPRREQ_NO_NUM |
19 |
|
NOA_CARRIER_NO_NUM |
20 |
|
NOA_950_CALL |
21 |
|
NOA_TEST_LINE_CODE |
22 |
|
NOA_INT_INBOUND |
23 |
|
NOA_NAT_OR_INTL_CARRIER_ACC_CODE_INC |
24 |
|
NOA_CELL_GLOBAL_ID_GSM |
25 |
|
NOA_CELL_GLOBAL_ID_NMT_900 |
26 |
|
NOA_CELL_GLOBAL_ID_NMT_450 |
27 |
|
NOA_CELL_GLOBAL_ID_AUTONET |
28 |
|
NOA_PORTED_NUMBER |
29 |
|
NOA_PISN_SPECIFIC_NUMBER |
30 |
|
NOA_UK_SPECIFIC_ADDRESS |
31 |
|
NOA_SPARE |
32 |
|
NOA_SUBSCRIBER_OPERATOR_REQUESTED |
33 |
|
NOA_NATIONAL_OPERATOR_REQUSTED |
34 |
|
NOA_INTERNATIONAL_OPERATOR_REQUESTED |
35 |
|
NOA_NO_NUMBER_PRESENT_OPERATOR_REQUESTED |
36 |
|
NOA_NO_NUMBER_CUT_THROUGH_TO_CARRIER |
37 |
|
NOA_950_PUBLIC_HOTEL_LINE |
38 |
|
NOA_TEST_CALL |
39 |
|
NOA_MCI_VNET |
40 |
|
NOA_INTERNATIONAL_OPERATOR_TO_OPERATOR_OUTSIDE_WZI |
41 |
|
NOA_INTERNATIONAL_OPERATOR_TO_OPERATOR_INSIDE_WZI |
42 |
|
NOA_DIRECT_TERMINATION_OVERFLOW |
43 |
|
NOA_ISN_EXTENDED_INTERNATIONAL_TERMINATION |
44 |
|
NOA_TRANSFER_ISN_TO_ISN |
45 |
|
NOA_CREDIT_CARD |
46 |
|
RESERVED |
47 |
Table 4: Integer Values for NPI
|
NPI Type |
Integer Values |
|---|---|
|
NPI_NONE |
0 |
|
NPI_E164 DEFAULT |
1 |
|
NPI_DATA |
2 |
|
NPI_TELEX |
3 |
|
NPI_PNP |
4 |
|
NPI_NATIONAL |
5 |
|
NPI_TELEPHONY |
6 |
|
NPI_MARITIME_MOBILE |
7 |
|
NPI_LAND_MOBILE |
8 |
|
NPI_ISDN_MOBILE |
9 |
SimWriter Usage Example
In this example, a TDM hairpinning call is made via the PGW 2200 to the NAS. First, look via SimWriter in order to see if the Cisco PGW 2200 dial plan reports any errors at the moment that the PGW 2200 is incorrectly provisioned.
Note: Due to some modification on SimWriter, Cisco recommends that you upgrade the PGW to the latest patches. Check the for additional information. Also make sure you see engine.SysVirtualSwitch = 1 in the XECfgParm.dat file in the /opt/CiscoMGC/etc directory and that the CALLVER*.mdos are installed under the /opt/CiscoMGC/lib directory. Refer to Cisco bug ID CSCee18831 ( registered customers only) which addresses how SimWriter should be able to capture all property driven changes.
This example removes the first two digits from the B-number and reroutes the call back out on route51. The BMODDIG result type has a "dw=1" and "dw=2", which indicates to start removing beginning with the first digit of the B-number, and deleting the first two digits [dw=2].
numan-add:resultset:custgrpid="sw01",name="rset51" numan-add:resulttable:custgrpid="sw01",name="strip51",resulttype="BMODDIG", dw1="1",dw2="2",setname="rset51" numan-add:resulttable:custgrpid="sw01",name="route51",resulttype="ROUTE", dw1="rtgrp51",setname="rset51"
After you add the BMODDIG and ROUTE mml commands, and issuing the mml commands prov-cpy or prov-dply, you can check the configuration using the prov-rtrv and numan-rtrv commands.
PGW2200 mml>prov-rtrv:trnkgrp:"all"
MGC-01 - Media Gateway Controller 2004-02-02 18:51:34.983 WET
M RTRV
"session=UnsolNot_On17:trnkgrp"
/*
NAME CLLI SVC TYPE SELSEQ QABLE
---- ---- --- ---- ------ -----
51 NULL ss7-bru8 TDM_ISUP LIDL N
*/
;
PGW2200 mml>numan-rtrv:bdigtree:custgrpid="sw01",callside="originating"
MGC-01 - Media Gateway Controller 2004-02-02 18:54:31.632 WET
M RTRV
"session=UnsolNot_On17:bdigtree"
/*
digitString callSide
----------- --------
originating
PointInDigitString
------------------
51
ResultSetName
-------------
rset51
resultName resultType dw1 dw2 dw3 dw4 nextResult
---------- ---------- --- --- --- --- ----------
strip51 BMODDIG 1 2 0 0 route51
route51 ROUTE rtgrp51 0 0 0 0
In this case, you can either make a test call and check the correct working or, check the output of the SimWriter to see if any error messages have been reported.
If you do not remember the simWriter argument, use a prompt interface instead of the command-line as this output shows:
mgcusr@PGW2200%simWriter -prompt Enter the trunk group number (4 Characters) : 51 Enter the ISDN preference (0-2 [Default 1]) : Enter the Called party's NOA (1-47 [Default 4]) : 4 Enter the Called party's NPI(0-9 [Default 1]) : 1 Enter the Called party number : 5151929729 Enter the Calling party number : 9727
You can also choose to directly use the command-line as this output shows:
!--- This command has been wrapped to the second
!--- line for spatial reasons.
mgcusr@PGW2200% simWriter -tgnum 51 -isdnp 0 -cdnoa 4 -cdnpi 1 -cdpn
5151929729 -cgpn 9727 -full -sipadd -sid
Analyzing .dat files:
used default Route Preference
used default Terminating Max Digits
used default Terminating Min Digits
used default Originating Min Digits
used default Originating Max Digits
used default Carrier Screening property
used default Anumnormalise property
used default Bnumnormalise property
used default Enable IP Screening property
used default NPA
used default AOCEnabled field
used the default field for default directory number
used the default Database Access Error flag
Analysis complete, writing message...
Message completed, running simulator...
********************************************
* START full call translation verification *
********************************************
Decoding generic analysis trace...
the length of the trace is 170 bytes
( 1)entering Dial Plan Base.
( 2) tracing Dial plan, entering Dial Plan Base table with...
( 1) 0 parameter(s):
( 2) reading Dial Plan Base table...
( 1) 1 parameter(s) read:
( 4) Dial Plan numbering base = 10.
( 1)ending Dial Plan Base...
( 1)entering Call Information Reception.
( 7) A Number: '9727'
(13) B Number: '5151929729'
( 1)ending Call Information Reception...
( 1)entering Profile Analysis (NOA).
(13) Tracing call number: '5151929729' (Called party number)
( 7) Trace for customer: 'sw01'
( 5) TreeBase: '10'
( 2) tracing Dial plan, entering NOA_A table with...
( 1) 1 parameter(s):
( 4) NOA_A table index = 4.
( 2) reading NOA_A table...
( 1) 2 parameter(s) read:
( 4) NPI_A index = 0.
( 4) Result index = 0.
( 2) tracing Dial plan, entering CPC table with...
( 1) 1 parameter(s):
( 4) CPC table index = 9.
( 2) reading CPC table...
( 1) 1 parameter(s) read:
( 4) Result Index = 0.
( 2) tracing Dial plan, entering TMR table with...
( 1) 1 parameter(s):
( 4) TMR table index = 78.
( 2) reading TMR table...
( 1) 1 parameter(s) read:
( 4) Result Index = 0.
( 2) tracing Dial plan, entering NOA table with...
( 1) 1 parameter(s):
( 4) NOA table index = 4.
( 2) reading NOA table...
( 1) 2 parameter(s) read:
( 4) NPI index = 0.
( 4) Result index = 0.
( 2) tracing Dial plan, entering Result table with...
( 1) 1 parameter(s):
( 4) Result table index = 0.
( 1)ending Profile Analysis (NOA)...
( 1)entering A-Number Analysis.
( 7) Tracing call number: '9727' (Calling party number)
( 7) Trace for customer: 'sw01'
( 2) tracing Dial plan, entering A-Number digit tree table with...
( 1) 1 parameter(s):
( 4) A-Number digit tree index = 1 (starting index table)
( 2) reading A-Number digit tree table...
( 1) 3 parameter(s) read:
( 4) Digit to present = 0.
( 4) Next tree index = 0.
( 4) Result index = 0.
----------break in message reached----------
Decoding generic analysis trace...
the length of the trace is 206 bytes
( 2) tracing Dial plan, entering A-Number digit tree table with...
( 1) 1 parameter(s):
( 4) A-Number digit tree index = 10 (table: 2 / digit: '-1')
( 2) reading A-Number digit tree table...
( 1) 3 parameter(s) read:
( 4) Digit to present = 0.
( 4) Next tree index = 0.
( 4) Result index = 0.
( 1)ending A-Number Analysis...
( 1)entering B-Number Analysis.
(13) Tracing call number: '5151929729' (Called party number)
( 7) Trace for customer: 'sw01'
( 2) tracing Dial plan, entering B-Number digit tree table with...
( 1) 1 parameter(s):
( 4) B-Number digit tree index = 1 (starting index table)
( 2) reading B-Number digit tree table...
( 1) 3 parameter(s) read:
( 4) Digit to present = 0.
( 4) Next tree index = 0.
( 4) Result index = 0.
( 2) tracing Dial plan, entering B-Number digit tree table with...
( 1) 1 parameter(s):
( 4) B-Number digit tree index = 6 (table: 1 / digit: '5')
( 2) reading B-Number digit tree table...
( 1) 3 parameter(s) read:
( 4) Digit to present = 0.
( 4) Next tree index = 4.
( 4) Result index = 0.
( 2) tracing Dial plan, entering B-Number digit tree table with...
( 1) 1 parameter(s):
( 4) Route table index = 1.
( 4) Next route index = 0.
( 4) Route Size = 1.
( 4) Distribution (0=Sequential, else=Load Shared) = 0.
( 1)ending Route Analysis...
( 1)entering Trunk Group Analysis.
( 2) tracing Routing plan, entering Trunk route table with...
( 1) 2 parameter(s):
( 4) Trunk route table index = 1.
( 4) Trunk route table offset = 1.
( 2) reading Trunk route table...
( 1) 1 parameter(s) read:
( 4) Trunk group table index = 1.
( 2) tracing Routing plan, entering Trunk group table with...
( 1) 1 parameter(s):
( 4) Trunk group table index = 1.
( 2) reading Trunk group table...
( 1) 3 parameter(s) read:
( 4) Trunk group ID = 51.
( 4) Signalling type = 1.
( 4) Attributes table index = 1.
( 2) tracing Routing plan, entering TDM attributes table with...
( 1) 1 parameter(s):
( 4) TDM attributes table index = 1.
( 2) reading TDM attributes table...
( 1) 5 parameter(s) read:
( 4) Reattempts = 0.
( 4) Queueing = 0.
( 4) Cut through = 3.
( 4) Reserve Incoming Percentage = 0.
( 4) Bearer Capability Index = 0.
( 1)ending Trunk Group Analysis...
( 1)entering Trunk Sorting.
( 3) trunk group summary: 1 primary and 0 secondary trunk groups
primary trunk groups:
( 4) 51
secondary trunk groups:
( 1)ending Trunk Sorting...
( 1)end of trace reached
********************************************
* DONE full call translation verification *
* with 0 bytes left untranslated *
********************************************
mgcusr@PGW2200%
Finally, make a test call and capture the details using the SS7 sniffer (in this case, the PT-MCT Cisco Sniffer Application).
Time stamp Orig IP address Dest IP address Prot Msg Data
------------------------------------------------------------------------------------
15:44:33.184859 1-010-1[02129] 1-003-1[02073] ITU ISUP. -> IAM (01) CIC=00031
CDPN=51929729F
SLS=15 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 31
MESSAGE TYPE 0x01 IAM - Initial_Address_Msg
NATURE_OF_CONNECTION 0x06
LENGTH: 0x01 FIXED DATA 0x00
SATELLITE IND 0 no_satellite_circuit_in_connection
CONTINUITY CHECK IND 0 Continuity_check_not_required
ECHO SUPPRESSOR IND 0 outgoing_half_echo_suppressor_not_included
FORWARD CALL IND. 0x07
LENGTH: 0x02 FIXED DATA 0x60 0x00
NATL/INTL CALL IND 0 incoming_national_call
END-TO-END METHOD IND 0 no_end_to_end_method_available
INTERWORKING IND 0 no_interworking_encountered
END-TO-END INFO IND 0 no_end_to_end_information_available
ISUP IND. 1 ISUP_used_all_the_way
ISDN PREFERENCE IND 1 isdn_up_pref_not_reqd
ISDN ACCESS IND. 0 originating_access_non_ISDN
SCCP Method 0 no indication
CALLING PARTYS CATEGORY 0x09
LENGTH: 0x01 FIXED DATA 0x0A
CALLING PARTYS CATEGORY 10 ordinary_subscriber_precedence_level_1
TRANSMISSION MEDIUM REQUIRED 0x02
LENGTH: 0x01 FIXED DATA 0x03
TRANSMISSION MEDIUM REQUIRED 3 3_1_kHz_audio
INDEX TO CALLED PTY ADDRESS 0x02
INDEX TO OPTIONAL PART 0x09
CALLED PARTY NUMBER PARM 0x04
LENGTH: 0x07 VAR. DATA 0x83 0x90 0x15 0x29 0x79 0x92 0x0F
ODD/EVEN IND 1 odd_number_of_digits
NATURE OF ADDRESS IND 0x03 national_number
INTERNAL NETWORK PARM 1 routing to internal network number not allowed
NUMBERING PLAN 1 ISDN_Telephony_Numbering_Plan
DIGITS: 51929729F
EXTENSION DIGIT F -ST
OPTIONAL PARAMETERS:
RESERVED/UNKNOWN OPT PARM 0x3D
LENGTH: 0x01 OPT. DATA 0x1F
USER SERVICE INFO 0x1D
LENGTH: 0x03 OPT. DATA 0x90 0x90 0xA3
EXTENSION BIT 1 last_octet
CODING STANDARD 0 CCITT_coding_standard
BC INFO TRANSFER CAP 16 audio_3_1_khz
EXTENSION BIT 1 last_octet
TRANSFER MODE 0 circuit_mode
INFORMATION TRANSFER RATE 16 rate_64_kb_per_s
EXTENSION BIT 1 last_octet
USER LAYER IDENTIFICATION 1 user_info_layer_1_protocol
MULTIPLIER/PROTOCOL ID 3 A_law_speech
ACCESS TRANSPORT 0x03
LENGTH: 0x04 OPT. DATA 0x1E 0x02 0x81 0x83
END OF OPTIONAL PARAMETERS 0x00
****************** END_OF_MSG ******************
15:44:33.211009 10.48.84.25:2427 10.48.84.188:2427 MGCP...... ->
CRCX 2001761 s0/ds1-0/31@v5300-3.cisco.com MGCP 0.1
C: 75
L: e:off,nt:LOCAL
M: sendrecv
R:
S:
X: 1E8B60
15:44:33.225115 10.48.84.188:2427 10.48.84.25:2427 MGCP...... -> 200 2001761 OK
I: 33
v=0
o=- 51 0 LOCAL EPN S0/DS1-0/31
s=Cisco SDP 0
c=LOCAL EPN S0/DS1-0/31
t=0 0
m=audio 0 LOCAL 0
15:44:33.241263 10.48.84.25:2427 10.48.84.188:2427 MGCP...... ->
CRCX 2001762 s0/ds1-0/1@v5300-3.cisco.com MGCP 0.1
C: 75
L: e:off,nt:LOCAL
M: sendrecv
v=0
o=- 51 0 LOCAL EPN S0/DS1-0/31
s=Cisco SDP 0
c=LOCAL EPN S0/DS1-0/31
t=0 0
m=audio 0 LOCAL 0
15:44:33.254784 10.48.84.188:2427 10.48.84.25:2427 MGCP..... -> 200 2001762 OK
I: 34
v=0
o=- 52 0 LOCAL EPN S0/DS1-0/1
s=Cisco SDP 0
c=LOCAL EPN S0/DS1-0/1
t=0 0
m=audio 0 LOCAL 0
15:44:33.270628 1-003-1[02073] 1-010-1[02129] ITU ISUP. ->
IAM (01) CIC=00001
CDPN=929729F
SLS=01 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 1
MESSAGE TYPE 0x01 IAM - Initial_Address_Msg
NATURE_OF_CONNECTION 0x06
LENGTH: 0x01 FIXED DATA 0x00
SATELLITE IND 0 no_satellite_circuit_in_connection
CONTINUITY CHECK IND 0 Continuity_check_not_required
ECHO SUPPRESSOR IND 0 outgoing_half_echo_suppressor_not_included
FORWARD CALL IND. 0x07
LENGTH: 0x02 FIXED DATA 0x60 0x00
NATL/INTL CALL IND 0 incoming_national_call
END-TO-END METHOD IND 0 no_end_to_end_method_available
INTERWORKING IND 0 no_interworking_encountered
END-TO-END INFO IND 0 no_end_to_end_information_available
ISUP IND. 1 ISUP_used_all_the_way
ISDN PREFERENCE IND 1 isdn_up_pref_not_reqd
ISDN ACCESS IND. 0 originating_access_non_ISDN
SCCP Method 0 no indication
CALLING PARTYS CATEGORY 0x09
LENGTH: 0x01 FIXED DATA 0x0A
CALLING PARTYS CATEGORY 10 ordinary_subscriber_precedence_level_1
TRANSMISSION MEDIUM REQUIRED 0x02
LENGTH: 0x01 FIXED DATA 0x03
TRANSMISSION MEDIUM REQUIRED 3 3_1_kHz_audio
INDEX TO CALLED PTY ADDRESS 0x02
INDEX TO OPTIONAL PART 0x08
CALLED PARTY NUMBER PARM 0x04
LENGTH: 0x06 VAR. DATA 0x83 0x90 0x29 0x79 0x92 0x0F
ODD/EVEN IND 1 odd_number_of_digits
NATURE OF ADDRESS IND 0x03 national_number
INTERNAL NETWORK PARM 1 routing to internal network number not allowed
NUMBERING PLAN 1 ISDN_Telephony_Numbering_Plan
DIGITS: 929729F
EXTENSION DIGIT F -ST
OPTIONAL PARAMETERS:
RESERVED/UNKNOWN OPT PARM 0x3D
LENGTH: 0x01 OPT. DATA 0x1F
USER SERVICE INFO 0x1D
LENGTH: 0x03 OPT. DATA 0x90 0x90 0xA3
EXTENSION BIT 1 last_octet
CODING STANDARD 0 CCITT_coding_standard
BC INFO TRANSFER CAP 16 audio_3_1_khz
EXTENSION BIT 1 last_octet
TRANSFER MODE 0 circuit_mode
INFORMATION TRANSFER RATE 16 rate_64_kb_per_s
EXTENSION BIT 1 last_octet
USER LAYER IDENTIFICATION 1 user_info_layer_1_protocol
MULTIPLIER/PROTOCOL ID 3 A_law_speech
ACCESS TRANSPORT 0x03
LENGTH: 0x04 OPT. DATA 0x1E 0x02 0x81 0x83
RESERVED/UNKNOWN OPT PARM 0x39
LENGTH: 0x02 OPT. DATA 0x3D 0xC0
END OF OPTIONAL PARAMETERS 0x00
****************** END_OF_MSG ******************
15:44:33.544074 1-010-1[02129] 1-003-1[02073] ITU ISUP. -> ACM (06) CIC=00001
SLS=01 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 1
MESSAGE TYPE 0x06 ACM - Address_Complete_Msg
BACKWARD CALL IND 0x11
LENGTH: 0x02 FIXED DATA 0x02 0x14
CHARGE IND 2 charge
CALLED PTYS STATUS IND 0 no_indication_default
CALLED PARTYS CATEGORY 0 no_indication_default
END-TO-END METHOD IND 0 no_end_to_end_method_available
INTERWORKING IND 0 no_interworking_encountered
END-TO-END INFO IND 0 no_end_to_end_information_available
ISUP IND. 1 ISUP_used_all_the_way
REVERSE HOLDING IND 0 reverse_holding_not_required
ISDN ACCESS IND. 1 terminating_access_ISDN
INDEX TO OPTIONAL PART 0x01
OPTIONAL PARAMETERS:
OPTIONAL BACKWARD CALL IND 0x29
LENGTH: 0x01 OPT. DATA 0x01
FORWARDING IND 0 no_indication
INBAND INFO IND 1 inband_information
SIMPLE SEGMENTATION 0 no additional information will be sent
NET EXCESSIVE DELAY 0 no_indication
USER NETWORK INTERACTION 0 no_indication
END OF OPTIONAL PARAMETERS 0x00
****************** END_OF_MSG ******************
15:44:33.560716 10.48.84.25:2427 10.48.84.188:2427 MGCP...... ->
MDCX 2001764 s0/ds1-0/31@v5300-3.cisco.com MGCP 0.1
C: 75
I: 33
L: e:off,nt:LOCAL
M: sendrecv
R:
S:
X: 1E8B63
v=0
o=- 52 0 LOCAL EPN S0/DS1-0/1
s=Cisco SDP 0
c=LOCAL EPN S0/DS1-0/1
t=0 0
m=audio 0 LOCAL 0
15:44:33.565405 10.48.84.188:2427 10.48.84.25:2427 MGCP...... -> 200 2001764 OK
v=0
o=- 51 1 LOCAL EPN S0/DS1-0/31
s=Cisco SDP 0
c=LOCAL EPN S0/DS1-0/31
t=0 0
m=audio 0 LOCAL 0
15:44:33.580472 1-003-1[02073] 1-010-1[02129] ITU ISUP. -> ACM (06) CIC=00031
SLS=15 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 31
MESSAGE TYPE 0x06 ACM - Address_Complete_Msg
BACKWARD CALL IND 0x11
LENGTH: 0x02 FIXED DATA 0x02 0x14
CHARGE IND 2 charge
CALLED PTYS STATUS IND 0 no_indication_default
CALLED PARTYS CATEGORY 0 no_indication_default
END-TO-END METHOD IND 0 no_end_to_end_method_available
INTERWORKING IND 0 no_interworking_encountered
END-TO-END INFO IND 0 no_end_to_end_information_available
ISUP IND. 1 ISUP_used_all_the_way
REVERSE HOLDING IND 0 reverse_holding_not_required
ISDN ACCESS IND. 1 terminating_access_ISDN
INDEX TO OPTIONAL PART 0x01
OPTIONAL PARAMETERS:
OPTIONAL BACKWARD CALL IND 0x29
LENGTH: 0x01 OPT. DATA 0x01
FORWARDING IND 0 no_indication
INBAND INFO IND 1 inband_information
SIMPLE SEGMENTATION 0 no additional information will be sent
NET EXCESSIVE DELAY 0 no_indication
USER NETWORK INTERACTION 0 no_indication
END OF OPTIONAL PARAMETERS 0x00
****************** END_OF_MSG ******************
15:44:34.824070 1-010-1[02129] 1-003-1[02073] ITU ISUP. -> ANM (09) CIC=00001
SLS=01 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 1
MESSAGE TYPE 0x09 ANM - Answer_Msg
INDEX TO OPTIONAL PART 0x01
OPTIONAL PARAMETERS:
BACKWARD CALL IND 0x11
LENGTH: 0x02 OPT. DATA 0x02 0x04
CHARGE IND 2 charge
CALLED PTYS STATUS IND 0 no_indication_default
CALLED PARTYS CATEGORY 0 no_indication_default
END-TO-END METHOD IND 0 no_end_to_end_method_available
INTERWORKING IND 0 no_interworking_encountered
END-TO-END INFO IND 0 no_end_to_end_information_available
ISUP IND. 1 ISUP_used_all_the_way
REVERSE HOLDING IND 0 reverse_holding_not_required
ISDN ACCESS IND. 0 terminating_access_non_ISDN
ACCESS TRANSPORT 0x03
LENGTH: 0x04 OPT. DATA 0x1E 0x02 0x81 0x82
END OF OPTIONAL PARAMETERS 0x00
****************** END_OF_MSG ******************
15:44:34.841851 1-003-1[02073] 1-010-1[02129] ITU ISUP. -> ANM (09) CIC=00031
SLS=15 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 31
MESSAGE TYPE 0x09 ANM - Answer_Msg
INDEX TO OPTIONAL PART 0x01
OPTIONAL PARAMETERS:
BACKWARD CALL IND 0x11
LENGTH: 0x02 OPT. DATA 0x02 0x04
CHARGE IND 2 charge
CALLED PTYS STATUS IND 0 no_indication_default
CALLED PARTYS CATEGORY 0 no_indication_default
END-TO-END METHOD IND 0 no_end_to_end_method_available
INTERWORKING IND 0 no_interworking_encountered
END-TO-END INFO IND 0 no_end_to_end_information_available
ISUP IND. 1 ISUP_used_all_the_way
REVERSE HOLDING IND 0 reverse_holding_not_required
ISDN ACCESS IND. 0 terminating_access_non_ISDN
ACCESS TRANSPORT 0x03
LENGTH: 0x04 OPT. DATA 0x1E 0x02 0x81 0x82
END OF OPTIONAL PARAMETERS 0x00
****************** END_OF_MSG ******************
15:44:39.112351 1-010-1[02129] 1-003-1[02073] ITU ISUP. -> REL (0c) CIC=00001
Cause 16 = Normal Call Clearing
SLS=01 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 1
MESSAGE TYPE 0x0C REL - Release_Msg
INDEX TO VARIABLE PART 0x02
INDEX TO OPTIONAL PART 0x00
CAUSE IND 0x12
LENGTH: 0x02 VAR. DATA 0x80 0x90
EXTENSION BIT 1 diagnostic_is_not_included
CODING STANDARD 0 CCITT_standard
GENERAL LOCATION 0 User
EXTENSION BIT 1 diagnostic_is_not_included
CLASS 1 Normal event
VALUE IN CLASS 0
CAUSE VALUE 16 Normal_clearing
****************** END_OF_MSG ******************
15:44:39.130674 10.48.84.25:2427 10.48.84.188:242 MGCP...... ->
DLCX 2001766 s0/ds1-0/31@v5300-3.cisco.com MGCP 0.1
C: 75
I: 33
R:
S:
X: 1E8B65
15:44:39.131018 10.48.84.25:2427 10.48.84.188:2427 MGCP...... ->
DLCX 2001768 s0/ds1-0/1@v5300-3.cisco.com MGCP 0.1
C: 75
I: 34
R:
S:
X: 1E8B67
15:44:39.131487 1-003-1[02073] 1-010-1[02129] ITU ISUP. ->
REL (0c) CIC=00031
Cause 16 = Normal Call Clearing
SLS=15 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 31
MESSAGE TYPE 0x0C REL - Release_Msg
INDEX TO VARIABLE PART 0x02
INDEX TO OPTIONAL PART 0x00
CAUSE IND 0x12
LENGTH: 0x02 VAR. DATA 0x80 0x90
EXTENSION BIT 1 diagnostic_is_not_included
CODING STANDARD 0 CCITT_standard
GENERAL LOCATION 0 User
EXTENSION BIT 1 diagnostic_is_not_included
CLASS 1 Normal event
VALUE IN CLASS 0
CAUSE VALUE 16 Normal_clearing
****************** END_OF_MSG ******************
15:44:39.133012 10.48.84.188:2427 10.48.84.25:2427 MGCP...... ->
250 2001766 HP delcon OK
15:44:39.134597 10.48.84.188:2427 10.48.84.25:2427 MGCP...... ->
250 2001768 HP delcon OK
15:44:39.151424 1-003-1[02073] 1-010-1[02129] ITU ISUP. -> RLC (10) CIC=00001
SLS=01 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 1
MESSAGE TYPE 0x10 RLC - Release_Complete_Msg
****************** END_OF_MSG ******************
15:44:39.247719 1-010-1[02129] 1-003-1[02073] ITU ISUP. -> RLC (10) CIC=00031
SLS=15 Pr:0 Ni:NTL
********************************** DETAIL **********************************
CIC 31
MESSAGE TYPE 0x10 RLC - Release_Complete_Msg
Note: Until now SimWritter was not able to capture all property driven changes. Refer to Cisco bug ID CSCee18831 ( registered customers only) .
NetPro Discussion Forums - Featured Conversations
| NetPro Discussion Forums - Featured Conversations for Voice |
| Service Providers: Voice over IP |
| Voice & Video: Voice over IP |
| Voice & Video: IP Telephony |
| Voice & Video: IP Phone Services for End Users |
| Voice & Video: Unified Communications |
| Voice & Video: IP Phone Services for Developers |
| Voice & Video: General |
Related Information
- Cisco PGW 2200 Softswitch Tech Notes
- Configuration Examples for the PGW 2200
- Voice Technology Support
- Voice and IP Communications Product Support
-
Recommended Reading: Troubleshooting Cisco IP Telephony
- Technical Support & Documentation - Cisco Systems
| Updated: Jun 07, 2005 | Document ID: 48120 |