Table Of Contents
NM-1A-T3 and NM-1A-E3 Documentation Roadmap
This document provides links to resources for understanding, installing, and configuring the 1-port DS3 and E3 ATM network modules. Use this document in HTML format on Cisco.com.
Note This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.
Product Information and Supported Hardware and Software
• DS3 and E3 ATM Network Modules for the Cisco 2600 and 3600 Series , product catalog
• Framing Formats on ATM DS-3 and E3 Interfaces , tech note
Service Categories and Traffic Shaping
• Understanding the CBR Service Category for ATM VCs , tech note
Regulatory Compliance and Safety Information
See the following chapters of the Cisco Network Modules Hardware Installation Guide:
•Overview in the hardware installation documentation for your router
•" Configuring ATM" chapter in the Cisco IOS Wide-Area Networking Configuration Guide
• Per-VC Class-Based, Weighted Fair Queuing (Per-VC CBWFQ) on the Cisco 7200, 3600, and 2600 Routers , sample configuration
• Understanding and Configuring ATM PVC Bundles , sample configuration
Copyright © 2004 Cisco Systems, Inc. All rights reserved.