Cisco® announces the end-of-sale and end-of life dates for the Cisco Aironet 1200 Series Platform and Cisco Aironet 1231 Access Point. The last day to order the affected product(s) is June 19, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Customers are encouraged to migrate from the Cisco Aironet 1200 Series Platform and Cisco Aironet 1231 access point to the Cisco Aironet 1240 and 1250 Series for greater investment protection and enhanced functionality. Information about these products can be found at http://www.cisco.com/en/US/products/hw/wireless/index.html.
Table 1. End-of-Life Milestones and Dates for the Cisco Aironet 1200 Series Platform and Cisco Aironet 1231 Access Point
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
December 19, 2008
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
June 19, 2009
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
September 17, 2009
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
June 19, 2011
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
June 19, 2010
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
June 19, 2010
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
September 14, 2013
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
June 18, 2014
HW = Hardware
OS SW = Operating System Software
App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
AIR-AP1210
IOS AP, CBus and MPCI Slots (no radios), Enet Uplink
AIR-AP1250=
Modular Auto AP Platform (no radio modules); Spare
AIR-AP1210=
IOS AP, CBus and MPCI Slots (no radios), Enet Uplink
AIR-AP1250=
Modular Auto AP Platform (no radio modules); Spare
AIR-AP1231G-A-K9
802.11g IOS AP w/Avail CBus Slot, FCC Cnfg
AIR-AP1242G-A-K9
802.11g Integrated Auto AP; RP-TNC; FCC Cnf
AIR-AP1231G-A-K9
802.11g IOS AP w/Avail CBus Slot, FCC Cnfg
AIR-AP1252G-A-K9
802.11g/n-d2.0 2.4-GHz Mod Auto AP; 3 RP-TNC; FCC
AIR-AP1231G-E-K9
802.11g IOS AP w/Avail CBus Slot, ETSI Cnfg
AIR-AP1242G-E-K9
802.11g Integrated Auto AP; RP-TNC; ETSI Cnf
AIR-AP1231G-E-K9
802.11g IOS AP w/Avail CBus Slot, ETSI Cnfg
AIR-AP1252G-E-K9
802.11g/n-d2.0 2.4-GHz Mod Auto AP; 3 RP-TNC; ETSI
AIR-AP1231G-J-K9
802.11g IOS AP w/Avail CBus Slot, Japan Cnfg
AIR-AP1242G-P-K9
802.11g Integrated Auto AP; RP-TNC; Japan2 Cnfg
AIR-AP1231G-J-K9
802.11g IOS AP w/Avail CBus Slot, Japan Cnfg
AIR-AP1252G-P-K9
802.11g/n-d2.0 2.4-GHz Mod Auto AP; 3 RP-TNC; Japan2
AIR-LAP1231G-A-K9
802.11g LWAPP AP Dual RP-TNC:Avail Cbus Slot FCC Cnfg
AIR-LAP1242G-A-K9
802.11g only Unified AP; RP-TNC; FCC Cnfg
AIR-LAP1231G-A-K9
802.11g LWAPP AP Dual RP-TNC:Avail Cbus Slot FCC Cnfg
AIR-LAP1252G-A-K9
802.11g/n-d2.0 2.4-GHz Mod Unified AP; 3 RP-TNC; FCC
AIR-LAP1231G-E-K9
802.11g LWAPP AP Dual RP-TNC:Avail Cbus Slot ETSI Cnfg
AIR-LAP1242G-E-K9
802.11g only Unified AP; RP-TNC; ETSI Cnfg
AIR-LAP1231G-E-K9
802.11g LWAPP AP Dual RP-TNC:Avail Cbus Slot ETSI Cnfg
AIR-LAP1252G-E-K9
802.11g/n-d2.0 2.4-GHz Mod Unified AP; 3 RP-TNC; ETSI
AIR-LAP1231G-J-K9
802.11g LWAPP AP Dual RP-TNC:Avail Cbus Slot Japan Cnfg
AIR-LAP1242G-P-K9
802.11g only Unified AP; RP-TNC; Japan2 Cnfg
AIR-LAP1231G-J-K9
802.11g LWAPP AP Dual RP-TNC:Avail Cbus Slot Japan Cnfg
AIR-LAP1252G-P-K9
802.11g/n-d2.0 2.4-GHz Mod Unified AP; 3 RP-TNC; Japan2
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to Hhttp://www.cisco.com/go/tradein/H. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco Aironet 1200 Series Platform and Cisco Aironet 1231 Access Point through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to Hhttp://www.cisco.com/go/eosH.
Service prices for Cisco products are subject to change after the product End of Sale date.
