The Cisco® MCS 7825-I2-UC1 Media Convergence Server is a powerful platform for Cisco Unity® Connection and is preinstalled with an operating system optimized for the application. It occupies only 1 rack unit (1RU) while providing the features most requested in a server platform at a very economical price point.
• Intel Pentium D dual-core 2.8-GHz processor, an 800-MHz front side bus (FSB), and 4 MB of Layer 2 cache
• PC2-4200 Double Data Rate 1 (DDR1) memory
• Two onboard Gigabit Ethernet network interface cards (NICs)
• Two 80-GB serial-advanced-technology-attachment (SATA) hard disk drives configured in Redundant Array of Independent Disks (RAID) 1
• Quick-deployment third-party rail kit
• 350W Power Factor Correction (PFC) power supply
• 1RU (1.75-in.) form factor, 22-in. deep
SUPPORTED APPLICATIONS
The Cisco MCS 7825-I2-UC1 supports Cisco Unity Connection.
PRIMARY FEATURES AND BENEFITS
Performance
The Cisco MCS 7825-I2-UC1 is a robust, highly available server platform designed to support today's IP Communications applications. It uses a single Intel Pentium D dual-core 2.8-GHz processor with an 800-MHz FSB.
Memory
The Cisco MCS 7825-I2-UC1 supports up to 8 GB of DDR memory. The increased processor performance coupled with DDR memory allows customers to retrieve and process information faster and more efficiently. DDR memory executes twice the number of operations per cycle than traditional synchronous dynamic RAM (SDRAM) memory, effectively doubling the data exchange rate between memory and processors.
Variable-Speed Fan Support
The Cisco MCS 7825-I2-UC1 includes variable-speed fans to reduce operating noise. Through the use of temperature sensors within the server, the speed of the fans is adjusted to maintain the proper cooling, reducing the noise generated by the fans by operating them only when required and at a speed based upon the cooling requirements.
SATA and Integrated RAID
The Cisco MCS 7825-I2-UC1 server supports enhanced serviceability through integrated RAID level 1 and front-accessible, simple-swap SATA hard disk drives. If a hard drive fails, user data is preserved on the mirrored drive, and system administrators can easily replace the failing drive without removing the server from the rack, reducing downtime and providing data reliability in a compact, highly cost-effective server.
System Error LEDs
The Cisco MCS 7825-I2-UC1 provides a system error LED and system locator LED on the front of the server to make pinpointing system problems easier than ever. When a system error occurs, this indication is made on the front panel of the Cisco MCS 7825-I2-UC1. If no failures have occurred, the system error LED is not lit.
DAT Tape Drive Support
The Cisco MCS 7825-I2 can support an optional 36-/72-GB universal-serial-bus (USB) external Digital Audio Tape (DAT) drive. This tape drive connects through the USB 2.0 port on the server. The 36/72-GB DAT drive is available as either an external tape drive (part number DAT-USB-EXT-72=) or as a rack-mounted drive (part number DAT-USB-RM-72=).
PRODUCT SPECIFICATIONS
Table 1 gives product specifications of the Cisco MCS 7825-I2-UC1.
Table 1. Product Specifications
Processor at Product Introduction
Processor (CPU)
Intel Pentium D dual core
Processor internal clock speed
2.8 GHz
Level 2 cache
4 MB
Maximum processors
1
Processors installed
1
Basic input/output system (BIOS) type
Flash memory
Memory
Memory maximum
8 GB
Memory bus clock
533 MHz
Memory technology
PC2-4200 DDR SDRAM
Bit-error mitigation
Error correction code (ECC)
Total RAM slots
4
Memory installed
2 GB (2 x 1 GB)
RAID Controller
Controller model
IBM mezzanine ServeRAID-8e Controller
Interface
Embedded to planar
Cache
No
Battery-backed write caching
No
RAID levels supported
1
Hard Disk
Hard disk installed
2 x 80 GB
Hard disk route processor module (RPM)
7200
Hard disk interface type
SATA
Network Connectivity
Ethernet NIC
2 onboard 10/100/1000
Connector
2 RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA Category 6 UTP (recommended), 5E UTP, or 5 UTP (2 pair) up to 328 ft (100m)
Expansion Options
PCI-X non-hot plug 66-MHz and 64-bit slots
1 (full height, three-fourths length)
PCI-X non-hot plug 66-MHz and 64-bit slots
1 (half height, half length)
Interfaces
Serial ports
1 RS-232D
Parallel ports
0
USB 2.0 ports
4
Keyboard port
1 PS/2
Mouse port
1 PS/2
Audio ports
None
External Small Computer System Interface (SCSI) port
None
Security
• Power-on and privileged access password functions that control who has access to the data and server setup program on the server
• Selectable boot sequence that can prevent unauthorized installation of software or removal of data from the diskette drive
Power
Maximum input power
350W
Autoranging AC input
Yes
PFC
Yes
Input low range
100 to 127 (nominal) VAC; 50-60Hz; 6A
Input high range
200 to 240 (nominal) VAC; 50-60Hz; 3A
Input kVA approximately
Maximum configuration 0.290 kVA
Environmental
Air temperature-server on
50 to 95°F (10 to 35°C)
Air temperature-server off
-104 to 140°F (-40 to 60°C)
Humidity-server on
8 to 80% (noncondensing)
Maximum altitude
7000 ft (2133m)
BTU rating full configuration
989 Btu/hr (290W)
Sound emissions, idle
6.5 bel (operating)
Cooling system
7 fans installed (two are in power supply)
Dimensions
Form factor
Rack-mount 1RU
Rack-mounting
Included for standard third-party rack
Weight-maximum
30.0 lb (12.7 kg)
Height
1.75 in. (43mm)
Width
17.32 in. (440mm)
Depth
22.0 in. (559mm)
Equipment Approvals and Safety
• FCC-Verified to comply with Part 15 of the FCC Rules, Class A
• Canada ICES-003, issue 4, Class A
• UL/IEC 60950-1
• CAN C22.2 No. 60950-1-03
• NOM-019
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page. Table 2 gives the part number for ordering based on product.
Table 2. Ordering Information
Product Name
Part Number
Cisco Unity Connection
UNITYCN-BUNDLE
SERVER SPARES
Table 3 gives information about ordering spare servers.
Table 3. Ordering Information for Spare Servers
Application
Spare Part Number
Cisco Unity Connection
MCS-7825-I2-UC1
FIELD-REPLACEABLE SPARES
Table 4 gives ordering information for server spare parts.
Table 4. Ordering Information for Server Spare Parts
Spare-Part Number
Description
MEM-7825-I2-2GB=
Spare pair 1-GB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7825-I2 server
HDD-7825-I2-80=
Spare 80-GB SATA hard disk drive, cold pluggable
IDENTIFYING SERVER CPU SPEED
As the Cisco MCS 7825-I2 matures, the processor speeds will be changed as Intel retires slower processors and replaces them with faster processors. Table 5 provides the Cisco manufacturing part number shown on the chassis to help identify the processor speed of any individual server.
Table 5. Manufacturing Part Numbers by Processor Speed
Processor
Manufacturing Part Number Located on Server
Introduction
Intel Pentium 4 3.4-GHz processor
74-4521-01
Initial production of server
SERVICE AND SUPPORT
Cisco Systems® offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.
