Guest

Cisco BTS 10200 Softswitch

EoS and EoL for the Cisco BTS 10200 Alarm Panel, AC PDU, and DC PDU

Hierarchical Navigation

Downloads

Product Bulletin No. EOL4032

Cisco Systems® announces the end-of-sale and end-of life dates for the Cisco BTS 10200 Alarm Panel, AC PDU, and DC PDU. The last day to order the affected product is October 6, 2006. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) until October 5, 2011. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product. Table 2 lists the product part numbers affected by this announcement.
Customers are encouraged to replace the alarm panel or power distribution units (PDUs) with industry-standard hardware available from many sources.

Table 1. End-of-Life Milestones and Dates for the Cisco BTS 10200 Alarm Panel, AC PDU, and DC PDU.

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

April 7, 2006

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

October 6, 2006

Last Ship Date

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

January 4, 2007

End of Routine Failure Analysis Date

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

October 6, 2007

End of New Service Attachment Date

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

October 6, 2007

End of Service Contract Renewal Date

The last date to extend or renew a service contract for the product.

January 1, 2011

Last Date of Support

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

October 5, 2011

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

BTS10200-ACPDU=

BTS 10200 AC PDU

BTS10200-ALRM=

Field Replaceable Alarm Panel

BTS10200-DCPDU=

Field Replaceable Spare, Hendry DC PDU

PRODUCT MIGRATION OPTIONS

There is no replacement available for the Cisco BTS 10200 Alarm Panel, AC PDU, and DC PDU at this time.

FOR MORE INFORMATION

For more information about the Cisco BTS 10200 Alarm Panel, AC PDU, and DC PDU, visit http://www.cisco.com/en/US/products/hw/vcallcon/ps531/prod_eol_notices_list.html or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.