End-of-Sale and End-of-Life Announcement for the Cisco Specified Cisco BTS 10200 Hardware and Accessories
Cisco Systems ® announces the end of life of the Cisco® BTS 10200 hardware and accessories. The last day to order these parts is December 01, 2004. Customers will continue to receive support from the Cisco Technical Assistance Center (TAC) until March 1, 2009. Table 1 describes the end-of-life milestones, definitions, and dates for the affected products. Table 2 lists the product numbers affected by this announcement.
Customers are encouraged to migrate to the Sun Netra 20s or other Cisco BTS 10200 certified hardware which can provide greater capacity. A list of BTS 10200 certified can be found the BTS 10200 Release Notes. Table 3 provides relevant information for migrating when appropriate.
Table 1: End-of-Life Milestones and Dates for the Cisco BTS 10200 Affected Products
Milestone
Definition
Date
End-of-life announcement date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
June 01, 2004
End-of-sale date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
December 1, 2004
Last shipment date
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead-time.
March 1, 2005
End of software maintenance releases date
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
March 1, 2005
End of routine failure analysis date
The last possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
March 1, 2005
End of new service attachment date
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
March 1, 2005
End of service contract renewal date
The last date to extend or renew a service contract for the product. The extension or renewal period cannot extend beyond the last date of support.
November 1, 2008
Last date of support
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
March 1, 2009
Table 2 Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
BTS10200-HW-AC-CC
4 AC AXMPs, Alarm Panel, PDU, 2924s, Cables, etc.
BTS10200-HW-DC-CC
4 AC AXMPs, Alarm Panel, PDU, 2924s, Cables, etc.
BTS10200-HW-AC-CC7
4 AC AXMPs with Ulticom Cards, Alarm Panel, PDU, 2924s, Cables, etc.
BTS10200-HW-DC-CC7
4 AC AXMPs with Ulticom Cards, Alarm Panel, PDU, 2924s, Cables, etc.
BTS10200-AXMP-AC=
Field Replaceable Spare, AXMP Unit, AC Power with Ulticom Card
BTS10200-AXMP-DC=
Field Replaceable Spare, AXMP Unit, CC Power with Ulticom Card
BTS10200-AXMP3-AC=
Field Replaceable Spare, AXMP Unit, AC Po Field Replaceable Spare, AXMP Unit, AC Power without Ulticom Card
BTS10200-AXMP3-DC=
Field Replaceable Spare, AXMP Unit, DC Power without Ulticom Card
Product Migration Options
These hardware products do not need to be replaced in the field. When ordering a new system or replacing hardware, migration to the Netra 20 or other Cisco-supported hardware platform is recommended.
Table 3 Product Comparisons
AXMP product
Netra 20
Processor
4 CPU at 440 mhz
2 CPU at 1200 mhz
Memory
4 gb memory
4 gb memory
Size
6 Rack Units
4 Rack Units
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Additional Information
For more information about Cisco products, please contact your Cisco account manager and/or Cisco Channel Partner.
For more information about the Cisco End-of-Life Policy, go to:
