The Cisco® Gigabit Ethernet High-Speed WAN Interface Card (HWIC) brings Gigabit Ethernet connectivity to Cisco Integrated Services Routers routers to accelerate applications such as Metro Ethernet access, inter-VLAN routing, and high-speed connectivity to LAN switches.
The single-port Cisco Gigabit Ethernet HWIC provides Gigabit Ethernet optical and copper connectivity in a compact form factor for all Cisco Integrated Service Routers (ISRs).
The Gigabit Ethernet HWIC enables branch offices to cost-effectively use high-speed uplinks in numerous environments (Figure 1). The enhanced performance of Gigabit Ethernet in Cisco ISRs to enable new applications and services, as well as provide greater capacity for existing inter-VLAN routing and bridging capabilities. Additionally, branch offices can now connect to metropolitan-area networks (MANs).
Note: The HWIC provides Gigabit Ethernet connectivity but will not support line rate since the throughput is limited by the platforms.
For flexibility, the HWIC includes one Small Form-Factor Pluggable (SFP) slot to carry any Cisco copper or optical SFP (Table 1), allowing customers to use different SFPs for special distance, cost, existing infrastructure, and future expansion requirements.
Cisco IOS® Software provides enhanced capabilities such as quality of service (QoS), Multiprotocol Label Switching (MPLS), IP Security (IPSec), and Layer 3 VPNs. Since this is a true routed port card, the user can configure an IP address directly on the HWIC-1GE-SFP interface and does not have to configure the port for VLAN trunking as is done in Switched Virtual Interface (SVI) configurations.
Figure 1. Cisco Gigabit Ethernet HWIC
Table 1. Cisco Gigabit Ethernet HWIC Product Part Numbers and Descriptions
CWDM 1470 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1490 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1510 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1530 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1550 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1570 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1590 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
CWDM 1610 NM SFP Gigabit Ethernet and 1G/2G Fibre Channel
Ethernet and VLAN Features
• IEEE802.3 with IEEE802.2 Service Advertising Protocol (SAP)
• IEEE802.3 with IEEE802.2 and Subnetwork Access Protocol (SNAP)
• IEEE 802.1Q VLAN tagging
• Flow control (802.3x)
• Gigabit EtherChannel® for link redundancy
Network Management Features
• Simple Network Management Protocol (SNMP) support
• Remote Monitoring (RMON) support
• Cisco NetFlow accounting
• Weighted Random Early Detection (WRED)
• Precedence setting and mapping (802.1p)
• Committed access rate (CAR)
• Access control lists (ACLs)
• MAC address filtering
• Extended ACLs
• Voice and remaining QoS features, per platform and per Cisco IOS Software release
• Jumbo frame support up to 9576 bytes
• Cisco Group Management Protocol and Internet Group Management Protocol (IGMP) for multicasting
• High availability, supporting Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), and Gateway Load Balancing Protocol (GLBP)
• Hot insertion and removal for SFPs on all platforms
• Media or SFP type display through a command-line interface (CLI)
Gigabit Ethernet Applications
Gigabit Ethernet in the Branch Office
In a branch office, the Cisco Gigabit Ethernet HWIC provides a high-speed uplink. Figure 2 shows the HWIC being used to bridge non-routable protocols, while providing Layer 3 connectivity. The HWIC is also useful in situations that require IEEE 802.1q inter-VLAN routing and in any LAN requiring fiber connectivity.
Figure 2. VLAN Trunking Application
Gigabit Ethernet in MANs
Figure 3 shows the Cisco Gigabit Ethernet HWIC used to connect Layer 3 VPNs over a MAN. Cisco IOS Software enables QoS applications such as traffic shaping and Network-Based Application Recognition (NBAR). As with VLAN trunking, this is ideal for situations in which fiber connectivity is desirable.
Figure 3. Metro Ethernet Application
Table 2 gives the Cisco IOS Software requirements for the Cisco Gigabit Ethernet HWIC, and Table 3 lists the platforms supported.
• Dimensions (H x W x D) 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm)
• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -4 to 149°F (-20 to 65°C)
• Relative humidity: 10 to 90 percent, non-condensing
Cisco and Partner Services for the Branch
Services from Cisco and our certified partners can help you transform the branch experience and accelerate business innovation and growth in the Borderless Network. We have the depth and breadth of expertise to create a clear, replicable, optimized branch footprint across technologies. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help improve operational efficiency, save money, and mitigate risk. Optimization services are designed to continuously improve performance and help your team succeed with new technologies. For more information, visit http://www.cisco.com/go/services.