Table Of Contents
This section provides a list of error messages that may appear during the installation, configuration, and use of the ACAU. In addition to the message text, each message contains an explanations well as a recommended user action.
This appendix contains the following section:
Error Message Please enter a profile name.
Explanation When a new profile is being created and no profile name is entered in the Profile Name
field, the error message appears after clicking OK.
Recommended Action Enter a valid profile name.
Error Message You must set at least one shared key or the WPA Passphrase to enable
Explanation If you select Static WEP in the Security page and do not enter a WEP key, the error
message appears after clicking OK.
Recommended Action Enter a valid WEP key in the Define Pre-Shared Keys window.
Error Message `x' is not a hexadecimal character.
Explanation This error message appears when you enter an invalid character in the fields for WEP
keys in the Static WEP configuration.
Recommended Action Enter valid WEP key characters.
Error Message In order to select an Ad Hoc network, you must have a Network Name. Do
you want to enter a Network Name?
Explanation When you select Ad Hoc in the Profile Editor's Network Type field and have not
specified an SSID or security option, this message appears.
Recommended Action Assign an SSID and configure the profile's security options before selecting
Ad Hoc as the network type.
Error Message The passwords you entered do not match. Please enter then again.
Explanation This message appears when you confirm your password in the LEAP dialog box for the
"Use Saved User Name and Password" option.
Recommended Action Enter the password correctly.
Error Message The User Name is empty. Please enter a user name.
Explanation This message appears a user name is not entered in the LEAP settings dialog box for the
"Use SAved User Name and Password" option.
Recommended Action Enter a valid user name.
Error Message At least one wireless checkbox must be selected.
Explanation This message appears when no selections are made in the Wireless Mode section of the
Profile Editor's Advanced screen.
Recommended Action Check at least one wireless mode configuration.
Error Message Entry must be 5 characters long. Please enter 4 more characters.
Explanation This error occurs when the ASCII text key entry is selected for the Pre-shared (static
WEP) configuration and only one character is entered in the WEP Key 1 field.
Recommended Action Enter a valid number of characters for the WEP key.
Error Message The Passphrase must be between 8 and 64 characters.
Explanation This message appears when the passpharase entered in the WPA/WPA2 Pre-shared Key
security mode is less than 8 characters or more than 64 characters.
Recommended Action Enter a valid number of characters (8 to 64) for the passphrase.
Error Message You must define a Certificate to use TLS. Click Configure to define a
Explanation This error occurs when EAP-TLS is selected as a WPA or 802.1x security option and
Recommended Action Click Configure and define a certificate for these security modes.
Error Message No certificates were found on your computer. Please select a different
Explanation ACAU was unable to locate a certificate when you selected EAP-TLS in the WPA pr
802.1x security options.
Recommended Action You must download and install a certificate before you can use the EAP-TLS
security option. Refer to Microsoft documentation for information on downloading and installing a
Error Message Please enter exactly 12 characters, or leave the entry field empty.
Explanation This error occurs when you enter a MAC address in the Specified Access Point MAC
Addresses section of the Preferred Access Points screen that is less than 12 characters.
Recommended Action Enter a valid MAC address for the access point or leave the field blank.
Error Message File Format Error
Explanation This error occurs when you attempt to import a file in a format other than .prf.
Recommended Action Select the correct file to import.
Error Message Error: Unknown data file format.
Explanation This error occurs when you attempt to open a .dat file that ACAU cannot read.
Recommended Action Open configuration files that have been created by ACAU.
Error Message Installation failed due to card not being inserted. Please rerun
installation wizard with card installed or see your desktop technical support for
Explanation This error occurs when you attempt to upgrade ACAU software without a client card
installed in your computer.
Recommended Action Install a PCM or PCI card in your computer and reinstall the ACAU software.