Table Of Contents

Numerics - A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - Q - R - S - T - U - V - W -

Index

Numerics

802.1Q Encapsulation Mode setting     4-3

A

access point

creating and configuring VLANs on     4-11

Access Point Radio Port page     13-9

accounting on RADIUS server     9-12

activity timeout     7-19, 9-6

administrator authorization     8-32

Aironet extensions     3-19

antenna

gains     A-3 to  A-5

antennas

receive and transmit     3-15

Apply button     2-3

AP Radio Advanced page     3-17

AP Radio Hardware page     3-10

AP Radio Identification page     3-8

assigning network ports     9-11

associations allowed, more than 20 workgroup bridges     3-19

Association table

Association Table Advanced page     7-16

Association Table page     9-2

Station page     9-3

authentication server

Authentication Server Setup page     8-15

backup servers     8-31

EAP     8-3

port setting     8-16

shared secret     8-17

authentication types

combining MAC-based and EAP     8-25

Network-EAP     8-3

open     8-5

shared key     8-6

summary of settings     8-27

B

backup authentication servers     8-31

basic settings

configuration server protocol     3-4

default gateway     3-4

ensure compatibility with     3-7

IP address     3-4

IP subnet mask     3-4

optimize radio network for     3-6

role in radio network     3-4

SNMP admin. community     3-7

SSID     3-4, 3-9, 3-11

system name     3-3

baud rate     2-5

beacons, period and rate     3-13

bit-flip attack     8-3

blinking top panel indicators     13-33

BOOTP protocol     7-5

BOOTP server timeout     7-5

Boot Server Setup page     7-4

Broadcast Domain Segmentation     4-5

broadcast SSID     3-11

broadcast WEP key rotation     8-13

browsing to network devices     9-2

C

Cancel button     2-3

CDP MIB     2-8

centralized administrator authentication     8-35

assigning RADIUS or TACACS servers     8-36

authorization parameters     8-38

examples of     8-38

procedure for configuring     8-35

system flow notes     8-37

channel

overlap     3-14

restrict searched channels     3-14

search for less-congested channel     3-14

channels, supported by regulatory domains     A-2, A-3

checkstack command     13-20

Cisco Discovery Protocol MIB     2-8

Cisco Secure ACS

enabling EAP     8-18

setting session-based WEP key timeout     8-19

classify workgroup bridges as network infrastructure     3-19

CLI

auto-apply     2-7

common functions     2-6

diagnostics     13-15

terminal emulator settings     2-4

client devices

browsing to     9-2

deauthenticating     9-8

disassociating     9-8

EAP settings     8-17

in network map     2-4

Station page information     9-4

cold restart     10-14

combining EAP and MAC-based authentication     8-25

configuration

distributing the configuration     10-9

downloading the configuration     10-11

resetting the configuration     10-13

System Configuration Setup page     10-10

uploading the configuration     10-12

configuration server protocol     3-4

Console/Telnet Setup page     11-4

criteria for deploying wireless VLANs     4-8

D

Database Query page, gets and sets     11-3

data rate, radio     3-12

default format     C-2

defined     11-5

description of     7-26

DHCP

class identifier     7-7

lease duration     7-6

minimum lease duration     7-6

multiple-offer timeout     7-5

diagnostic pages

AP Radio Port page     13-9

Ethernet Port page     13-7

Event Log page     13-13

Network Diagnostics page     13-2

Network Ports page     13-5

packet tracing     13-28

distribute configuration     10-9

distribute firmware     10-8

limit distributions     10-10

diversity, antenna     3-15

DNS server     7-9

draft of 802.1x protocol     8-16

DTIM     3-13

E

EAP authentication

combining with MAC-based authentication     8-25

overview     8-3

setting up in Cisco Secure ACS     8-18

setting up on the access point     8-15

setting WEP key timeout     8-19

EIRP, maximum     A-4 to  A-5

EMBLEM format     7-26

encryption. See WEP

ensure compatibility with     3-7

Error messages     C-1

Ethernet configuration

advanced settings     3-27

hardware settings     3-24

identity settings     3-23

speed     3-25

Ethernet encapsulation type     3-20

Ethernet indicator     13-32

Ethernet Port page     13-7

Event log messages     C-1

Cisco Emblem format     C-2

message descriptions     C-4

message formats     C-2

statuses and reasons     C-28

event log messages     C-2

Event Log page     13-13

Event notification

Event Display Setup page     7-19

Event Handling Setup page     7-21

Express Setup page     3-3

extended statistics     7-18

F

filters

ISO numeric designators for protocols     B-1

MAC address filtering     5-6

protocol filtering     5-2

protocol filter lists     B-1

find an access point's physical location     13-33

firmware

distributing to other Access Points     10-8

updating to a new version     10-2

flow control     2-5

fragment threshold     3-13

frequencies     A-2, A-3

FTP     7-10

G

gateway     3-4

H

help, setting up     7-7

hexadecimal digits     8-8

Home button     2-2

hops     9-6

Hot Standby mode     12-5

HTTP Port     7-8

HyperTerminal     2-6

I

initialization vector     8-12

IP subnet mask     3-4

ISO designators for protocols     B-1

K

key features     1-2

key hashing, WEP     8-12

Kilomicroseconds, in beacon period     3-13

L

LEAP

enabling on a repeater access point     8-19

with Network-EAP setting     8-14

LED indicators

Ethernet     13-32

locate unit by flashing LEDs     13-33

radio traffic     13-32

status     13-32

limiting distributions     10-10

link test     9-6

load balancing     3-19

locate unit by flashing LEDs     13-33

logs     13-13

M

MAC address     3-3

MAC address filters     5-6

MAC-based authentication     8-21

combining with EAP     8-25

setting up in Cisco Secure ACS     8-26

map windows     2-3

Maximum Number of Enabled VLAN IDs setting     4-3

memory, conserving     7-18

memory use diagnostics     13-24

Message Integrity Check     8-3

Messages     C-1

MIB files

access point MIB     2-8

Cisco Discovery Protocol MIB     2-8

IEEE802dot11-MIB     2-8

standard MIB-II     2-8

MIC     8-10

monitored access point     12-5

multicast packets     3-18

N

name server     7-9

NAS, adding and configuring     8-18

native VLAN

creating     4-11

identifying     4-19

mapping to SSID     4-21

Native VLAN configuration     4-5

Native VLAN creating     4-11

Native VLAN ID setting     4-3

Network-EAP     8-3

network infrastructure, classify workgroup bridges as     3-19

network map window     2-4

Network Ports page     13-5

O

OK button     2-3

optimize radio network for     3-6

Optionally allow Encrypted packets on the unencrypted VLAN setting     4-4

P

packet tracing     13-28

parity     2-5

password reset     13-36

pings     9-6

ports, assigning to MAC addresses     9-11

power level maximum     A-4 to  A-5

power level setting     3-13

preamble     3-22

primary port     3-9

protocol filters

enabling filters     5-5

forward or block     5-5

list of available protocols     B-1

priorities     5-5

setup     5-2

time to live setting     5-4

proxy Mobile IP     6-1

authentication server page explained     6-13

components of     6-7

configuring     6-18

configuring on a wired LAN     6-19

configuring security associations on a CiscoSecure ACS server     6-23

general page explained     6-12

how it works     6-8

local SA bindings link     6-15

security     6-11

settings on the authenticator configuration page     6-14

settings on the statistics page     6-16

settings on the subnet map table page     6-18

setup page explained     6-11

statistics     6-16

understanding     6-2

view subnet map table     6-18

prxoy Mobile IP

settings on the local SA bindings page     6-15

PSPF     7-18

Q

QoS configuration     5-10

entering information for     5-10

example     5-17

Generate QBSS Element     5-11

Send IGMP General Query     5-12

settings on QoS setup page     5-11

Traffic Category     5-12

Use Symbol Extensions     5-11

Quality of Service     1-3

R

radio

carrier test     13-3

serial number     3-8

radio cell role     3-18

radio configuration

advanced settings     3-15

hardware settings     3-10

identity settings     3-8

primary port     3-9

radio indicator     13-32

radio modulation     3-22

radio power level     3-13

RADIUS-based VLAN access control     4-7

RADIUS server

backup servers     8-31

shared secret     8-17

wireless network accounting     9-12

receive antenna     3-15

regulatory

domains     A-2, A-3

regulatory domains     A-2, A-3

related publications, obtaining     xv

repeater

chain of access points     12-3

setting up a repeater     12-2

setting up as a LEAP Client     8-19

specified access points     3-21

resetting to the default configuration     13-36

restarts, cold and warm     10-14

restore defaults     2-3

restrict searched channels     3-14

roaming     1-3

role in radio network     3-4

root unit     3-5

routing setup     7-11

RTS retries and threshold     3-13

S

search for less-congested channel

restrict searched channels     3-14

Secure Shell     11-5

security

Cisco Secure ACS     8-18

overview     8-2

Security Setup page     8-33

user manager     8-32

security, VLAN     4-4

serial number, radio     3-8

server setup

boot server     7-4

FTP     7-10

name server     7-9

routing     7-11

time server     7-2

web server     7-7

session-based WEP key, timeout value     8-19

severity levels     7-18

shared key     8-6

SNMP

Admin. community     3-7

Database Query page     11-3

SNMP Setup page     11-2

supported MIBs     2-8

using to set WEP     8-10

Speed setting     3-25

SSH     11-5

SSID     3-4

for infrastructure devices     4-21

primary and secondary     4-6

standby mode     12-5

Station pages     9-3

statistics     9-8

status indicator     13-32

stop bits     2-5

System Configuration Setup page     10-10

system name     3-3

T

Telnet interface

enabling Telnet     11-5

setup page     11-4

temporal key integrity protocol     3-21

terminal emulator     2-4

TFTP     7-11

timeout per device class setting     7-19

timeout value for session-based WEP keys     8-19

time server

GMT offset     7-3

manually set date and time     7-3

TKIP     8-12

top panel indicators     13-31

tracing packets     13-28

transmit antenna     3-15

transmit power     3-13

U

unicast packets, filtering     5-9

updating firmware     10-2

user management

capabilities     8-34

creating list of authorized users     8-33

user information     8-33

using     11-5

V

vendor class identifier     7-7

VLAN

enabling tagging     4-19

native,identifying     4-19

native,mapping to SSID     4-21

security     4-4

VLAN (802.1Q) Tagging setting     4-3

VLAN configuration

802.1Q Encapsulation Mode     4-3

broadcast domain segmentation     4-5

creating and configuring on access point     4-11

creating and configuring SSIDs     4-16

creating native VLAN     4-11

creating SSID for infrastructure devices     4-21

enabling VLAN (802.1Q) tagging     4-19

entering information     4-2

example of     4-9

Existing VLANs     4-4

identifying the native VLAN     4-19

Maximum Number of Enabled VLAN IDs     4-3

native VLAN configuration     4-5

Native VLAN ID     4-3

obtaining and recording setup information     4-11

Optionally allow Encrypted packets on the unencrypted VLAN     4-4

primary and secondary SSIDs     4-6

rules and guidelines for     4-21

security policy     4-4

settings on VLAN setup page     4-2

Single VLAN ID which allows Unencrypted packets     4-4

using configuration screens     4-11

VLAN (802.1Q) Tagging     4-3

VLAN Name     4-4

VLAN ID

obtaining and recording     4-11

VLAN ID #1 Setup page     4-13

VLAN ID which allows Unencrypted packets setting     4-4

VLANs

creating and configuring on access point     4-11

creating and configuring SSIDs for     4-16

creating native VLAN     4-11

creating SSID for Infrastructure devices     4-21

deployment example     4-9

guidelines for deploying wireless     4-8

Summary of rules for deployment of     4-21

using configuration screens     4-11

VLAN Setup page     4-12

VLAN Summary Status Link setting     4-3

VLAN support     1-5

W

warm restart     10-14

Web-based interface

common buttons     2-2

compatible browsers     2-2

Web server     7-7

WEP

broadcast key rotation     8-13

full encryption     8-9

key example     8-8

key hashing     8-12

key size     8-8

optional     8-9

overview     8-2

session key timeout     8-19

setting with SNMP     8-10

transmit key     8-8

with EAP     8-3

Windows XP, using EAP with     8-16

workgroup bridges, allowing more than 20 to associate     3-19

World mode     3-12