Worldwide [change] |Account |Register |About Cisco
Guest

Hierarchical Navigation

Cisco PGW 2200 Softswitch

Licensing Features for the Cisco PGW 2200 Softswitch

Downloads

Table Of Contents

Licensing Features for the Cisco PGW 2200 Softswitch Feature Module

Feature Overview

Types of Licenses

Base Software License

Interface License

Configuration-Time Ports License

Run-Time License

Obtaining a Cisco PGW 2200 Softswitch License

Users with an Existing Cisco PGW 2200 Softswitch Contract

New Cisco PGW 2200 Softswitch Contracts

Rehost Licenses

Related Documents

Supported Platforms

Prerequisites for Using this Feature

Installing the License File

Install if the Cisco PGW 2200 Softswitch is NOT Running

Install if the Cisco PGW 2200 Softswitch is Running

Deploying Licenses

Exception Handling

Base License Line Missing in License Files

License Server Unreachable

Upgrading to Support This Feature

Command Reference

New MML Commands

Modified MML Commands

RTRV-LICS—DISPLAY LICENSES (Release 9.8(1))

RTRV-NE-HEALTH—Retrieve Network Element Health (Release 9.7(3))

Software Changes for This Feature Module

Alarms

New Alarms

Log Messages

Measurements

Billing Interface

License Rejecting Reason (Tag: 4244)

License Rejecting Direction (Tag: 4245)

Processes

Cause and Location Codes

Obtaining Documentation and Submitting a Service Request

Glossary


Licensing Features for the Cisco PGW 2200 Softswitch Feature Module

Document Release History

Publication Date
Comments

February 27, 2009

Updated for SIP-I interface license.

November 26, 2008

Updated for Cisco PGW 2200 Softswitch Release 9.8 TimesTen in-memory database and SBE interface licenses.

March 12, 2007

Initial version of the document.


Feature History

Release
Modification

9.8(1)

Added support for SIP-I interface license.

9.8(1)

Added support for TimesTen in-memory database and SBE interface licenses.

9.7(3)

Support for Licensing Features for the Cisco PGW 2200 Softswitch feature was introduced on the Cisco PGW 2200 Softswitch software.


This document describes the Licensing Features for theCisco PGW 2200 Softswitch feature.

This feature is described in the following sections:

•Feature Overview

•Supported Platforms

•Prerequisites for Using this Feature

•Installing the License File

•Upgrading to Support This Feature

•Command Reference

•Software Changes for This Feature Module

•Obtaining Documentation and Submitting a Service Request

•Glossary

Feature Overview

To manage licenses, the Cisco PGW 2200 Softswitch provides the license files that are stored in a directory where the Cisco PGW 2200 Softswitch obtains the required license information. The Cisco PGW 2200 Softswitch uses the license file to enforce the capacity and features available. Each feature line of the license file is encrypted. Licensing also applies to HSI and BAMS components.

The Cisco PGW 2200 Softswitch requires a unique license file during the execution of the software. This license file allows the software to be loaded and run on a specified set of active/standby servers.

The Cisco PGW 2200 Softswitch release 9.8(1) introduces licensing control for TimesTen in-memory database and IP-IP Gateway. The TimesTen license keeps track of the Number Portability and Full Number Translations. The IP-IP Gateway interface license is needed when Cisco PGW 2200 Softswitch is used as Session Border Element (SBE) in the Cisco Session Border Controller solution. The terms IP-IP gateway interface licenses and SBE licenses are interchangeable within this document.

Types of Licenses

This feature enables or tracks the usage of four types of license objects in the Cisco PGW 2200 Softswitch based on license files:

•Base Software License

•Interface License

•Configuration-Time Ports License

•Run-Time License

•TimesTen License

Base Software License

The Base Software License allows the Cisco PGW 2200 Softswitch to execute on a specified Sun platform. The license is assigned to a given Cisco PGW 2200 Softswitch system. In a standalone configuration, the license is node-locked to the hostID of the Cisco PGW 2200 Softswitch machine. In active-standby configuration, the license is node-locked to the hostID of each Cisco PGW 2200 Softswitch machine. The license file controls the maximum number of call-legs that are allowed.

The licensing feature uses different machine identifications for different machine architectures. All Sun Microsystems machines have a unique hostID, which is a 32-bit integer. On Solaris, you can run the command hostid to get the 32-bit hostID in hexadecimal format.

Interface License

The interface license entitles you to use an interface type on a given Cisco PGW 2200 Softswitch system. If you configure that interface type without having a license for it, an alarm, "Unlicensed interface configured", appears; calls on that interface are rejected at run time.

. The following interfaces are managed at configuration time:

•INAP interface

•SS7 interface

•PBX interface (including DPNSS interface and QSIG interface)

•PRI interface

•Legal Intercept interface

•SBE interface (controlled by the H.248 protocol)

•SIPI interface

The use of SIP, BRI, MGCP, QBE, and EISUP interfaces is unrestricted. Call-leg RTU licenses are enforced on the Cisco PGW 2200 Softswitch for SIP and H.323. H.323 is supported on the HSI, which communicates to the Cisco PGW 2200 Softswitch through EISUP.

Configuration-Time Ports License

This license specifies how many TDM ports can be configured in a given Cisco PGW 2200 Softswitch system. The license file contains a feature ConfigTimeDescrepencyPeriod that allows the discrepancy between the configured TDM ports and the licensed TDM ports for a duration (45 days) from the time the license file is generated. Within this discrepancy period, the configuration-time ports oversubscription is allowed and the H.323 and SIP run time license control is not enforced. After that, the Cisco PGW 2200 Softswitch enforces the configuration time limit at run time. For example, if you configure 10,000 ports but only purchase 8,000 ports license, Cisco PGW 2200 Softswitch enforces the license by setting the run-time license number to 8,000. An alarm is always raised in the case of configuration-time ports oversubscription.

All the TDM ports (RTUs) are managed by Cisco PGW 2200 Softswitch licensing using the following two types:

•Signaling Mode RTU

•Call Control Mode RTU

TDM ports include the following:

•Trunking gateway ports (IMT/PRI) usually connected to PSTN

•Access gateway ports (DPNSS, QSIG, PRI, BRI) usually connected to a PBX

Run-Time License

The run-time license keeps track of the number of concurrent active TDM ports, SIP call legs, H.323 call legs, or the number of entries in the TimesTen database. You can exceed the run-time license number by only 30 percent; after that, only emergency calls and priority calls are allowed. An alarm, "Run-time oversubscription", appears if you use more TDM ports, SIP call legs, or H.323 call legs than the number of licenses. For normal call rejections, the alarm "Normal call rejected due to oversubscription" appears. To minimize the impact on performance, every day is divided into 96 15-minute intervals and the alarms are set and cleared at 15-minute intervals.

•If the calls counter exceeds 130 percent of the license number in the nth interval, an alarm is set in the (n+1)th interval, and normal calls are rejected if the calls counter exceeds 130 percent of the license number at this interval.

•If no call is rejected in the nth interval, the alarm is cleared in the (n+1)th interval.

Note Before the expiration of the ConfigTimeDescrepencyPeriod license feature, no call is rejected. Run-time license control is enforced after the expiration of the ConfigTimeDescrepencyPeriod license feature.

For a TDM call, SIP call, or H.323 call rejected due to license issues, the license reject measurements are increased. SeeTable 1 for these measurements.

Run-time license management is done on the active Cisco PGW 2200 Softswitch. If the call is rejected on the originating side, the call is rejected, and corresponding license-rejecting measurement is updated. If the call is rejected on the outgoing side, the Cisco PGW 2200 Softswitch performs cause analysis for a possible reroute. For each license check rejection, the license-rejecting measurement is updated.

The counters to entitled licenses are compared to the run-time licenses:

•If the incoming or outgoing SigPath is not licensed, the call is rejected.

•If both incoming and outgoing SigPaths are licensed, and the counter (or the summation of counters) is within the run-time license limit, the call is permitted.

•If you are oversubscribed but still within the oversubscription limit, a corresponding alarm appears in the consequent 15-minute interval. The corresponding counters based on incoming and outgoing Sigpath are increased, and the call is permitted.

•If the allowed oversubscription limit is exceeded, the call is rejected if it is a normal call. A corresponding alarm appears in the consequent 15-minute interval. Emergency calls and priority calls are counted but they are not rejected.

TimesTen License

The TimesTen RTU license keeps track of the Number Portability and Full Number Translations. The number of entries taken into account for licensing is the sum of the number of provisioned entries in all licensed database tables.

This imposes a constraint on the number of entries in the TimesTen tables PORTEDNUMBERS and FULLNUMBERTRANSLATION. If the sum of PORTEDNUMBERS entries and FULLNUMBERTRANSLATION entries exceeds the license, some calls may fail because of TimesTen database query failure.

Calls are rejected based on percentage. For example, if you bought 2000 licenses but there are 4000 entries in the database, then 50 percent of the calls are rejected. You can exceed the run-time license number by only 30 percent; after that, only emergency calls and priority calls are allowed. An alarm, "Normal call rejected due to database oversubscription and restricted access to database", appears if you use more database entries than the number of licenses.

Note Before the expiration of the ConfigTimeDescrepencyPeriod license feature, no call is rejected. Run-time license control is enforced after the expiration of the ConfigTimeDescrepencyPeriod license feature.

Obtaining a Cisco PGW 2200 Softswitch License

•Users with an Existing Cisco PGW 2200 Softswitch Contract

•New Cisco PGW 2200 Softswitch Contracts

Users with an Existing Cisco PGW 2200 Softswitch Contract

Step 1 Order the Cisco PGW 2200 Softswitch application SW upgrade license, www.cisco.com/go/license, consisting of Licensing SW, from the top level in the configuration tool (PGW2200-UPG-TO-9.8).

Cisco PGW 2200 Softswitch licensing objects consist of the following:

•Cisco PGW 2200 Softswitch application SW

•DS0 RTU license (signaling and call control)

•SIP license

•H323 license

•SS7 license

•PRI license

•PBX license

•INAP license

•LI license

•SBE interface license

•SIPI interface license

•TimesTen RTU license

Step 2 Specify the exact number of licenses you purchased or are using for the above license objects. Cisco analyzes the CDR and configuration data and provides the information related to your traffic pattern.

•The order is placed on New Product Hold (NPH).

•Release of the NPH requires:

–Cisco PGW 2200 Softswitch product marketing validates the information against the bookings database.

–Any discrepancy is resolved by discussion with the account team and/or with you. This might require modification of the order to reflect the eligible number of licenses.

–The NPH is removed.

Step 3 A Cisco PGW 2200 Softswitch software upgrade CD is shipped to you with a Product Authorization Key (PAK). A PAK is a string of characters identifying the product and the order.

Step 4 Obtain the license file from the Cisco license fulfillment web site using the PAK and the hostID.

Step 5 In the server hostname field, enter the hostname of the server machine where the Cisco PGW 2200 Softswitch software will run.

The hostname is the machine name where the license server will run. If the Cisco PGW 2200 Softswitch Softswitch software is to run in standalone mode, the license server runs on the same machine as the Cisco PGW 2200 Softswitch software. If the Cisco PGW 2200 Softswitch software is to run in active-standby mode, the license server can be on either the primary Cisco PGW 2200 Softswitch server machine or the secondary Cisco PGW 2200 Softswitch server machine.

Note If you apply several times to obtain a license file for the same Cisco PGW 2200 Softswitch, be sure to use the same hostname for each license file application. This can happen if you are expanding RTU licenses. If the hostname is different for different license files, you can use only some of the licenses.

Note In the active-standby mode, to ensure that the hostname is reachable on another Cisco PGW 2200 Softswitch, you can either change the DNS server configuration or add this hostname to /etc/hosts.

Step 6 In the server hostID field, enter the hostId of the server machine where the Cisco PGW 2200 Softswitch software will run.

To read the Sun machine host ID, run the Solaris shell command hostid on the machine, an 8-character hexadecimal number is displayed, for example, 83ca7c39.

•If the Cisco PGW 2200 Softswitch software is to run in standalone mode, enter the hostID of the server machine. For the hostID field, enter the host ID of the server hardware on which you will install your Cisco PGW 2200 Softswitch software.

•If the Cisco PGW 2200 Softswitch software is to run in active-standby mode, you need the hostID of both the machines, for example, 83ca7c39 and 83ca7c40. Enter both hostIDs, with a space between them, for example, 83ca7c39 83ca7c40.

Step 7 After you verify the order information, the license file is sent to you in email. We suggest that you keep the attached license file (.lic) in a safe place.

Step 8 You must install the license file in the specified machine before you can start the Cisco PGW 2200 Softswitch. See the "Installing the License File" section.

New Cisco PGW 2200 Softswitch Contracts

Step 1 Order the Cisco PGW 2200 Softswitch application SW upgrade license consisting of a Licensing SW from the top level in the configuration tool, www.cisco.com/go/license, (PGW2200-FFX if ordered with hardware or PGW2200-FFX-SWONLY if only software is ordered).

Cisco PGW 2200 Softswitch licensing objects consist of the following:

•Cisco PGW 2200 Softswitch application SW

•DS0 RTU license (signaling and call control)

•SIP license

•H323 license

•SS7 license

•PRI license

•PBX license

•INAP license

•LI license

•SBE interface license

•SIPI interface license

•TimesTen RTU license

Step 2 The order is placed on New Product Hold (NPH).

Step 3 The order is shipped with a Product Authorization Key (PAK). A PAK is a string of characters identifying the product and the order.

Step 4 Go to the Cisco License Fulfillment web site with the PAK and Host ID of the machine where the Cisco PGW 2200 Softswitch is to be installed and complete the information form.

Step 5 In the server hostname field, enter the hostname of the server machine where the Cisco PGW 2200 Softswitch software will run.

The hostname is the name of the machine where the license server will run. If the Cisco PGW 2200 Softswitch software will be running in standalone mode, the license server will run on the same machine as the Cisco PGW 2200 Softswitch software. If the Cisco PGW 2200 Softswitch software will be running in active-standby mode, the license server can be on either the primary Cisco PGW 2200 Softswitch server machine or on the secondary Cisco PGW 2200 Softswitch server machine.

Note If you apply several times to obtain a license file for the same Cisco PGW 2200 Softswitch, be sure to use the same hostname for each license file application. This can happen if you are expanding RTU licenses. If the hostname is different for different license files, you can use only some of the licenses.

Note In the active-standby mode, to ensure that the hostname is reachable on another Cisco PGW 2200 Softswitch, you can either change the DNS server configuration or add this hostname to /etc/hosts.

Step 6 A license file is sent to you in email.

Step 7 You must install the license file on the specified machine before you can start the Cisco PGW 2200 Softswitch. See the "Installing the License File" section.

Rehost Licenses

A license file is node-locked to a Cisco PGW 2200 Softswitch pair. This pair might be broken because of a machine crash or other reason. In this case, you must contact Cisco for another license file. This is called license file rehost. Perform the following steps to reinstall the license.

Step 1 When you receive the replacement license file, store it in a safe place.

Step 2 Remove the old license files under /opt/CiscoMGC/license on both the active and the standby machine.

Step 3 Copy the new license files to the Cisco PGW 2200 Softswitch machine under /opt/CiscoMGC/license on both the active and the standby machine.

Step 4 You must install the license file on the specified machine before you can start the Cisco PGW 2200 Softswitch. See the "Installing the License File" section.

Related Documents

This document contains information that is related to this feature. The documents that contain additional information related to the Cisco PGW 2200 Softswitch are at the following url:

http://www.cisco.com/en/US/products/hw/vcallcon/ps2027/tsd_products_support_series_home.html

Supported Platforms

The hardware platforms supported for the Cisco PGW 2200 Softswitch software are described in the Cisco PGW 2200 Softswitch Hardware Installation Guide.

The Cisco PGW 2200 Softswitch Release 9.8(1) software and the license server run on a Sun platform using Solaris 10.

Prerequisites for Using this Feature

The Cisco PGW 2200 Softswitch Softswitch must be running Cisco PGW 2200 Softswitch software Release 9.8(1). Prerequisites for this release can be found in the Release Notes for the Cisco PGW 2200 Softswitch Software Release 9.8(1)

Before migrating to the Release 9.8(1) license-based software, check the provisioning on the Cisco PGW 2200 Softswitch to ensure that the extNode type of HSI is correctly provisioned. You can use the prov-ed MML command to fix the provisioning problem. 

prov-ed:extnode:name="hsi-name", description="The HSI node connected to PGW",type="H323"

In Cisco PGW 2200 Softswitch Release 9.8(1), if the extNode type of HSI is provisioned as "MGC" instead of "H323", the Cisco PGW 2200 Softswitch rejects the H.323 calls.

HSI Release 4.3 can interoperate with the older version of Cisco PGW 2200 Softswitch only for a certain period of time.

For detailed information, see Installing and Configuring Cisco HSI Software at the following url:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/hsi_43/43ug/43ch2.htm

Installing the License File

This section contains the steps necessary for installing this feature. If you are installing and configuring the Cisco PGW 2200 Softswitch software on your system for the first time, see the Cisco PGW 2200 Softswitch Software Release 9.7 Installation and Configuration Guide at the following url:

http://www.cisco.com/en/US/docs/voice_ip_comm/pgw/9.8/Installation/Guide/Install98.html

Note You must install the license file on both the active and the standby Cisco PGW 2200 Softswitch for it to function properly.

Install if the Cisco PGW 2200 Softswitch is NOT Running

If the Cisco PGW 2200 Softswitch is not in a running state, perform the following steps.

Step 1 Save the license file (.lic) to a temporary directory on your hard disk

Step 2 Copy the license file to /opt/CiscoMGC/license directory of the Cisco PGW 2200 Softswitch.

Step 3 Log in as root.

Step 4 Enter the following command to start the Cisco PGW 2200 Softswitch: 

/etc/init.d/CiscoMGC start

The license file loads automatically.

Install if the Cisco PGW 2200 Softswitch is Running

If the Cisco PGW 2200 Softswitch is in a running state, perform the following steps.

Step 1 Save the license file (.lic) to a temporary directory on your hard disk.

Step 2 Copy the license file to /opt/CiscoMGC/license directory of the Cisco PGW 2200 Softswitch. Licenses are cumulative, so there can be multiple license files of the same type.

Step 3 Log in as mgcusr.

Step 4 Go to the /opt/CiscoMGC/bin directory of the Cisco PGW 2200 Softswitch.

Step 5 On the active Cisco PGW 2200 Softswitch, run the script reload_lics.sh.

The following is a sample out put from the script: 

Copyright  1998-2008, Cisco Systems, Inc.


   MGC-01 - Media Gateway Controller 2008-09-11 09:56:33.149 CST

M  COMPLD

   "LMAgent:

------------------------------------------------------------------

PGW Fully Featured License        9.8  permanent      

------------------------------------------------------------------

Interface Name          Entitled       Provisioned    

SS7Interface            Y              Y              

PRIInterface            Y              N              

PBXInterface            Y              Y              

INAPInterface           Y              N              

LIInterface             Y              N/A            

SBEInterface            N              N              

SIPIInterface           Y              Y 

------------------------------------------------------------------

Configure TDM Ports     Entitled       Provisioned    Available      

Call Control            200060         62             199998         

------------------------------------------------------------------

Run Time License        Entitled       

SIP                     400060         

H323                    400060         

TimesTen                1000000        

------------------------------------------------------------------"

   ;

Deploying Licenses

The Cisco PGW 2200 Softswitch deploys counted (Entitled/Provisioned/Available) licenses. These counted licenses must apply to both systems in an active/standby pair.

HSI and BAMS deploy license files locally. All licenses for these systems are node locked to a particular machine.

Exception Handling

Base License Line Missing in License Files

If the Cisco PGW 2200 Softswitch script stops because there is no valid base license, ensure that you have the valid base license and that you put this license file under /opt/CiscoMGC/license on that machine.

•If you have a valid license file but it is in the wrong directory, put the license file in /opt/CiscoMGC/license.

•If you have no base license or the license has expired, please contact the Cisco account team for a formal license.

•If you see a "Base license line missing in license files" or "License to expire in a week or less" alarm, see the "New Alarms" section for recommended actions.

•If the Cisco PGW 2200 Softswitch application software shuts down, see the log file to determine if the shutdown is due to license expiration. If so, please contact the Cisco account team or Cisco TAC.

License Server Unreachable

If you see the license server unreachable alarm, you can use the rtrv-lics output to determine how many days the license server has been unreachable.

Follow these steps to resolve this problem.

Step 1 Go to the machine where the license server is running (see the first line of the license file for the server hostname).

Step 2 Enter ps -ef |grep lmgrd to see whether the license server daemon is running.

a. If the license server is not running, enter /opt/CiscoMGC/local/reload_lics.sh to restart the license server.

b. If the license server still fails to start, check the /opt/CiscoMGC/var/log/flexlm_server.log for detailed information or contact Cisco TAC.

c. If the license server is running, but the active Cisco PGW 2200 Softswitch is running on a separate machine, ensure that the Cisco PGW 2200 Softswitch machine can reach the ip address of the license server machine.

Upgrading to Support This Feature

This section contains the steps necessary for upgrading the Cisco PGW 2200 Softswitch software to support this feature. If you are installing and configuring the Cisco PGW 2200 Softswitch software on your system for the first time, see the Cisco PGW 2200 Softswitch Release 9 Software Installation and Configuration Guide.

Note If you are upgrading from a release previous to Release 9.7(3), you have received a license file. If you are upgrading Cisco PGW 2200 Softswitch from Release 9.7(3) or a later release, you will receive an upgrade license file.

Perform the following steps to upgrade your Cisco PGW 2200 Softswitch software:

Step 1 Upgrade the standby Cisco PGW 2200 Softswitch.

Step 2 Install the license file on the standby Cisco PGW 2200 Softswitch.

Go to the Cisco website, use the hostID of the active and standby Cisco PGW 2200 Softswitch and PAK (received with the Cisco PGW 2200 Softswitch software CD) to apply the license file. Note that the server line will address the host ID of the standby Cisco PGW 2200 Softswitch host.

Step 3 Start the standby Cisco PGW 2200 Softswitch. Log in as root and enter: 

/etc/init.d/CiscoMGC start

Be aware that the license server will start before the start of Cisco PGW 2200 Softswitch software.

Step 4 Verify the license counts by entering: 

mml> rtrv-lics:all

Step 5 Run soft switchover from the active PGW: 

mml> sw-over::confirm

Step 6 Upgrade the previously active Cisco PGW 2200 Softswitch.

Step 7 Copy the license file to /opt/CiscoMGC/license on the previously active Cisco PGW 2200 Softswitch.

Step 8 Start the Cisco PGW 2200 Softswitch software on the previously active Cisco PGW 2200 Softswitch.

Note If you cannot start the Cisco PGW 2200 Softswitch application, see the "Exception Handling" section.

Command Reference

This section documents new, modified, or deleted Man-Machine Language (MML) commands. All other MML commands are documented in the Cisco PGW 2200 Softswitch Release 9 MML Command Reference.

New MML Commands

There are no new MML commands for this feature.

Modified MML Commands

This section contains the MML commands that were modified for this feature.

RTRV-LICS—DISPLAY LICENSES (Release 9.8(1))

Purpose:

This MML command displays the number of licenses to which you are entitled, the number of these licenses that are currently used, and the number of free licenses that are available. This MML command runs on an active Cisco PGW 2200 Softswitch and retrieves the license information. If you run it on a standby Cisco PGW 2200 Softswitch, you can correctly retrieve only the base license information; other types of license are displayed as unentitled on a standby Cisco PGW 2200 Softswitch.

Syntax: 

rtrv-lics:base

rtrv-lics:Interface

rtrv-lics:configure

rtrv-lics:runtime

rtrv-lics:all

Input Description:

•base—Base license information

•interface—Interface license information

•configure—Configuration TDM Ports license information

•runtime—Run-time license information

•all—All license information

Output Description:

•Entitled—Indicates if the interface is licensed and the number of licenses.

•Used—Indicates if the interface is used and the number of licenses provisioned.

•Available—Indicates the number of unused licenses.

•Run-time license

–Entitled license number—Number of licenses

–Current usage—Runtime counter of call legs

–Peak usage (15 min)—Measurement of peak usage (15-minute span)

–Peak usage (60 min)—Measurement of peak usage (60-minute span)

–Peak usage (24 hours)—Measurement of peak usage (24-hour span)

Example:

The MML command shown in the following example displays all license information: 

mml>rtrv-lics:all


MGC-01 - Media Gateway Controller 2008-11-18 01:43:34.030 CST 

M RTRV 

''LMAgent: 

------------------------------------------------------------------ 

PGW Fully Featured License 9.8 permanent 

------------------------------------------------------------------ 

Interface Name Entitled Provisioned 

SS7Interface Y Y 

PRIInterface Y N 

PBXInterface Y N 

INAPInterface Y N 

LIInterface Y N/A 

SBEInterface N N 

SIPIInterface N N

------------------------------------------------------------------ 

Configure TDM Ports Entitled Provisioned Available 

Call Control 100060 20 100040 

------------------------------------------------------------------ 

Runtime TimesTen Entitled Provisioned Available 

License 1000000 1 999999 

------------------------------------------------------------------ 


<Press 'SPACE' for next page, 'Enter' for next line or 'q' to quit this 
output> 

Run Time License TDMPorts SIP H323 

Entitled Number 100060 200060 200060 

Current Usage 0 0 0 

Peak Usage(15 min) 1 1 0 

Peak Usage(1 hour) 1 1 0 

Peak Usage(24 hour) 1 1 0 

------------------------------------------------------------------''

Comments:

Performance Impact Category: A


RTRV-NE-HEALTH—Retrieve Network Element Health (Release 9.7(3))

Purpose:

This MML command displays the health of the Cisco PGW 2200 Softswitch network element. This includes information about physical and virtual memory allocation, as well as CPU percentages showing the available computing resources.

Syntax: 

rtrv-ne-health

rtrv-ne-health::sys

rtrv-ne-health::callp

rtrv-ne-health::load

rtrv-ne-health::all

Input Description:

•sys—Retrieves the top-level status of the Cisco PGW 2200 Softswitch host and the number of active alarms, arranged by severity.

•callp—Retrieves

–Machine congestion level (MCL)

–Current number of calls in progress

–Current call attempt rate over the previous few seconds

–Number of successful calls over the last 15-, 60-, and 1440-minute collection intervals

–Number of failed call setups over the last 15-, 60-, and 1440-minute collection intervals

•load—Retrieves

–MCL

–CPU utilization

–Free memory

–Percentage of used disk space for each partition

•all—All of the above indicators.

Output Description:

•CALL: SIPLicRej TOT— SIP calls rejected due to run-time license management

•CALL: H323LicRej TOT—H323 calls rejected due to run-time license management

•CALL: TDMLicRej TOT—TDM calls rejected due to run-time license management

•CALL: TimesTenLicRej TOT—TimesTen calls rejected due to database entries license management

Example:

The following example displays the status of the Cisco PGW 2200 Softswitch host and the number of calls rejected by license failure. If a call is rejected by license failure, the corresponding LicRej measurement is increased, and the CALL: SuccCall TOT is increased, instead of CALL: FailCall TOT, because there is no protocol outage for this call flow. 

mml> RTRV-NE-HEALTH::ALL

MGC-01 - Media Gateway Controller 2006-05-18 08:21:02.581 EDT 

M COMPLD 

"Platform State:ACTIVE'' 

''0 critical, 19 major, 0 minor active alarms'' 

''Machine Congestion Level = MCL 0 (No Congestion), Reason: not 
applicable'' 

''Current in progress calls = 0, half calls = 0, full calls = 0, call 
attempts = 0 cps'' 

''CPU 0 Utilization = 0 % CPU 1 Utilization = 2 %'' 

''Memory (KB): 4921240 Free virtual, 6193264 Total virtual, 2096696 Total 
real'' 

''Interval (minutes) 15 60 1440'' 

''CALL: SuccCall TOT 0 0 0'' 

''CALL: FailCall TOT 0 0 0'' 

''CALL: SIPLicRej TOT 0 0 0'' 

''CALL: H323LicRej TOT 0 0 0'' 

''CALL: TDMLicRej TOT 0 0 0'' 

''CALL: TimesTenLicRej TOT 0 0 0''

''Filesystem kbytes used avail capacity Mounted on'' 

''/dev/dsk/c0t2d0s0 1986446 467404 1459449 25% /'' 

''/dev/dsk/c0t2d0s5 57416722 11775209 45067346 21% /opt'' 

;


 

Software Changes for This Feature Module

The following sections contain reference material related to this feature. Information is included on the following areas:

•Alarms

•Log Messages

•Measurements

•Billing Interface

•Processes

•Cause and Location Codes

Alarms

This section lists the alarms that are added and modified to support this feature. For information on the other alarms for the Cisco PGW 2200 Softswitch software, see the Cisco PGW 2200 Softswitch Release 9 Messages Reference.

New Alarms

The alarms that are added for this feature are listed below. Unless otherwise noted, these alarms were added in release 9.7(3)

Active and standby machines have different license files

Description

License files are mismatched between active and standby systems. Local files are used.

Severity

Major (service affecting)

Cause

License files are different on both machines.

Type

Processing error alarm.

Action

Check the license files on the active and standby machines to ensure that they use the same license files, and then run the license reload script to load the new license files.

Base license line missing in license files

Description

The base license line is missing in license files.

Severity

Major (service affecting)

Cause

This alarm could happen if the license file containing the base license has been removed.

Type

Processing error alarm.

Action

Check whether the license file that contains the base license line is at /opt/CiscoMGC/license. If it is not there, copy that license file to /opt/CiscoMGC/license.

Configuration time port discrepancy period expired

Description

The discrepancy period expired. The license will be enforced at run time.

Severity

Informational (non-service affecting)

Cause

The allowed configuration time TDM port and SIP and H.323 call legs discrepancy period expired.

Type

No error.

Action

None.

H323 call rejected due to wrong provision

Description

An H.323 call was rejected because the HSI EISUP interface is provisioned as an inter-PGW EISUP interface.

Severity

Major (service affecting)

Cause

An H.323 call was rejected because it was incorrectly provisioned.

Type

Processing error alarm.

Action

Correct the HSI EISUP interface provision.

License server unreachable

Description

This alarm appears if the license server is unavailable. The Cisco PGW 2200 Softswitch looks at the local license files to retrieve the configuration time TDM ports/ the run time license information. At the same time, a timer is started.

If the license server is still unreachable after 1 week, the license number will be half of the license number in license files.

If the license server is still unreachable after 8 weeks, the license number will be the number of demo licenses.

Severity

Major (service affecting)

Cause

The LMAgent reports that the TCP connection to the license server is lost. The license server might be down, or there might be something wrong with the network connection to the license server.

Type

Communication alarm.

Action

Verify that the network connection to the license server is up and ensure that the license server is running. For troubleshooting instructions, see the "License Server Unreachable" section.

License to expire in a week or less

Description

The license will expire in a week or less.

Severity

Major (service affecting)

Cause

The given License will expire in a week or less.

Type

Processing error alarm.

Action

Contact the account team for a formal license.

MMDB: Database temporary memory is nearly full (Release 9.8(1)

Description

Database temporary memory is nearly full.

Severity

Major (service affecting)

Cause

This alarm is reported when database temporary memory is nearly full.

Type

Processing error alarm

Action

Expand memory or reduce database size.

More TDM ports configured than entitled

Description

There are more TDM ports configured than are entitled.

Severity

Major (service affecting)

Cause

This alarm is reported because there are more TDM ports configured than are entitled.

Type

Processing error alarm.

Action

First verify that the license files are in the right place. If they are, then either contact the account team to order more TDM port licenses or remove the over-configured TDM ports. If they are not, move the license files to the right place.

Normal call rejected due to database oversubscription and restricted access to database (Release 9.8(1)

Description

Non-emergency call will be rejected due to database oversubscription and restricted access to database.

Severity

Major (service affecting)

Cause

This alarm is reported when a call is rejected on percentage when the number of TimesTen entries exceeds the allowed amount.

Type

Processing error alarm

Action

Contact the account team to purchase additional TimesTen license.

Normal call rejected due to oversubscription

Description

A non emergency call was rejected due to oversubscription.

Severity

Major (service affecting)

Cause

The number of active call legs exceeded the allowed oversubscription ratio.

Type

Processing error alarm.

Action

Contact the account team to purchase additional licenses.

Number of remaining Database RTU license reach 5% of the purchased RTU

Description

Only 5 percent of the purchased Database RTU licenses remain.

Severity

Informational (non-service affecting)

Cause

The LMAgent reports that you have used more than 95 percent of the purchased Database RTU licenses.

Type

No error.

Action

Contact the account team to purchase additional licenses.

Number of remaining Database RTU license reach 10% of the purchased RTU

Description

Only 10 percent of the purchased Database RTU licenses remain.

Severity

Informational (non-service affecting)

Cause

The LMAgent reports that you have used more than 90 percent of the purchased Database RTU licenses.

Type

No error.

Action

Contact the account team to purchase additional licenses.

Number of remaining Database RTU license reach 25% of the purchased RTU

Description

Only 25 percent of the purchased Database RTU licenses remain.

Severity

Informational (non-service affecting)

Cause

The LMAgent reports that you have used more than 75 percent of the purchased Database RTU licenses.

Type

No error.

Action

Contact the account team to purchase additional licenses.

Number of remaining RTU licenses reach 5% of the purchased RTU

Description

Only 5 percent of the purchased RTU licenses remain.

Severity

Informational (non-service affecting)

Cause

The LMAgent reports that you have used more than 95 percent of the purchased RTU licenses.

Type

No error.

Action

Contact the account team to purchase additional licenses.

Number of remaining RTU licenses reach 10% of the purchased RTU

Description

Only 10 percent of the purchased RTU licenses remain.

Severity

Informational (non-service affecting)

Cause

The LMAgent reports that you have used more than 90 percent of the purchased RTU licenses.

Type

No Error.

Action

Contact the account team to purchase additional licenses.

Number of remaining RTU licenses reach 25% of the purchased RTU

Description

Only 25 percent of the purchased RTU licenses remain.

Severity

Informational (non-service affecting)

Cause

The LMAgent reports that you have used more than 75 percent of the purchased RTU licenses.

Type

No error.

Action

Contact the account team to purchase additional licenses.

Run-time database oversubscription

Description

The number of TimesTen entries exceeds the allowed amount.

Severity

Major (service affecting)

Cause

This alarm is reported when the number of TimesTen entries exceeds the allowed amount.

Type

Processing error alarm.

Action

Contact the account team to purchase additional licenses.

Run-time oversubscription

Description

The call-leg number stays in the oversubscription zone for more than 15 minutes.

Severity

Major (service affecting)

Cause

This alarm is reported by the engine to indicate run-time license oversubscription.

Type

Processing error alarm.

Action

Contact the account team to purchase additional licenses.

System type limit license violation

Description

The entitled license number is larger than the license limit of the corresponding base license.

Severity

Major (service affecting)

Cause

This alarm is reported if the LMAgent finds that the entitled license number is larger than the system type license limit.

Type

Processing error alarm.

Action

Contact the account team to upgrade the base license to a fully featured PGW.

Unlicensed interface configured

Description

An unlicensed interface is configured.

Severity

Major (service affecting)

Cause

This alarm is reported because the configured interface is not licensed.

Type

Processing error alarm.

Action

First verify that the license file is in the right place. If it is, either contact the account team to order an interface license or remove the provisioning of that interface. If it is not, move the license file to the right place. Otherwise, no call can be made on this interface.

Log Messages

This section lists the logs that are added or deleted to support this feature. For information on the other logs, see the Cisco PGW 2200 Softswitch Release 9 Messages Reference.

New Log Messages

This section contains the log messages that were added to support this feature.

cmgPackInitializeCdr::execute: no interface

This message appears when the Cisco PGW 2200 Softswitch rejects an LI interface for licensing reasons.

handleEngReq(), counted license has been changed due to license server unreachable for a long period of time

This message indicates that the number of counted licenses is less because the license server has been unreachable for a long period of time.

handlePeriodTimerEvent(), counted license has been changed due to license server unreachable for a long period of time'

This message indicates that the number of counted licenses is less because the license server has been unreachable for a long period of time.

LMDataMgr::handlePeriodTimerEvent(), No valid base license, inform procM to shutdown PGW

This message indicates that there is no base license.

LMDataMgr::handleProcMReq(), gethostid() function been crashed, inform procM to shutdown PGW

This message indicates that the gethostid() function has crashed. The Cisco PGW 2200 Softswitch shuts down.

LMDataMgr::handleProcMReq(), No valid base license, inform procM to shutdown PGW

This message indicates that there is no base license.

LMDataMgr::initialize(), gethostid() function been crashed, inform procM to shutdown PGW

This message indicates that the gethostid() function has crashed. The Cisco PGW 2200 Softswitch shuts down.

LMDataMgr::initialize(), No valid base license, inform procM to shutdown PGW

This message indicates that there is no base license.

Measurements

Table 1 contains the system measurements (four counters) that are added to support this feature. For information on the other system measurements, see the Cisco PGW 2200 Softswitch Software Release 9 Operations, Maintenance, and Troubleshooting Guide.

Table 1 New Operational Measurements

MML Counter Group:Name
Description
Logging Interval

CALL-GROUP

CALL:SIPLicRej TOT





CALL:H323LicRej TOT






CALL:TDMLicRej TOT






CALL:TimesTenLicRej TOT

SIP call is rejected due to run-time license management. This counter is incremented each time an originating or terminating SIP call leg is rejected by the Cisco PGW 2200 Softswitch due to run-time license management.

H.323 call is rejected due to run-time license management. This counter is incremented each time an originating or terminating H.323 call leg is rejected by the Cisco PGW 2200 Softswitch due to run-time license management.


TDM call is rejected due to run-time license management. This counter is incremented each time an originating or terminating TDM call leg is rejected by the Cisco PGW 2200 Softswitch due to run-time license management.

TimesTen call is rejected due to a TimesTen license violation. This counter is incremented each time that the Cisco PGW 2200 Softswitch rejects a call due to run-time database license management.

15, 60, 1440





15, 60, 1440






15, 60, 1440






15, 60, 1440


Billing Interface

This section identifies the call detail record (CDR) data added for this feature. For billing interface information for the rest of the Cisco PGW 2200 Softswitch software, see the Cisco PGW 2200 Softswitch Release 9 Billing Interface Guide.

License Rejecting Reason (Tag: 4244)

Table 2 Reject License Protocol 

Name: License Rejecting Reason

Tag: 4244

Source: MDL

Description/Purpose: Name of reason that caused the call rejection due to license management.

Format: IA5 (string)

Length in Octets: 1-20

Data Value: string

Example: SS7 Interface

ANSI/ITU Variations: None

Extended Data Value: No extended value

General Information: For calls with License Control, a license check must be made. If the license limit threshold is reached or there is no license for this protocol interface, the call is rejected against that license. This record provides the identity of the license that caused the call to fail.

This tag is added to the CDB only if the call admission check results in rejection.

Cisco PGW 2200 Softswitch Release: Release 9.7.3 and later.

 

Answered (1010)

Deselected (1020)

Aborted (1030)

Release (1040)

Interrupted (1050)

Ongoing (1060)

Maintenance (1070)

External DB (1080)

End of Call (1110)

N

N

Y

N

N

N

N

N

Y


License Rejecting Direction (Tag: 4245)

Table 3 License Rejecting Direction 

Name: License Rejecting Direction

Tag: 4245

Source: MDL

Description/Purpose: Indication of whether the call was rejected by a license relating to the Cisco PGW 2200 Softswitch originating (incoming) or terminating (outgoing) side.

Format: IA5 (string)

Length in Octets: 1-20

Data Value:

1 = Inbound (Cisco PGW 2200 Softswitch originating side)

2 = Outbound (Cisco PGW 2200 Softswitch terminating side)

ANSI/ITU Variations: None

Extended Data Value: No extended value

General Information:

For calls with License Control, a license check must be made. If the license limit threshold is reached or there is no license for this protocol interface, the Call is rejected against that license. This record provides an indication of whether this was rejected by the originating (inbound) or terminating (outbound) side.

This tag is added to the CDB only if the call admission check results in rejection.

Cisco PGW 2200 Softswitch Release: Release 9.7.3 and later.

 

Answered (1010)

Deselected (1020)

Aborted (1030)

Release (1040)

Interrupted (1050)

Ongoing (1060)

Maintenance (1070)

External DB (1080)

End of Call (1110)

N

N

Y

N

N

N

N

N

Y


Processes

The LMAgent process was added for this feature. For information on other processes for the Cisco PGW 2200 Softswitch software, see the Cisco PGW 2200 Softswitch Release 9 Operations, Maintenance, and Troubleshooting Guide.

Table 4 shows the LMAgent process added for this feature.

Table 4 New Processes Controlled by the Process Manager 

Process
Description

LMAgent

License agent. Handles all the business about licensing based on license client library. Communicates with other processes through IPC.


Cause and Location Codes

Two internal cause codes described in Table 5 were added for this feature:

•IC_CALL_LICENSE_REJ

•IC_RUNTIMR_LICS_REJ

For information on other cause and location codes for the Cisco PGW 2200 Softswitch software, see the Cisco PGW 2200 Softswitch Release 9 Dial Plan Guide.

Table 5 Internally Generated Cause Codes 

Internal Cause Code
Cause Code Explanation

IC_CALL_LICENSE_REJ

To allow identifications of call rejections due to license control and also to allow individual cause analysis of such events, a new cause value IC_CALL_LICENSE_REJ is added to the Call context CauseEnum.

IC_CALL_LICENSE_REJ—Internal value 174. If the cause analysis result is to release the call, set the internal cause code to IC_CALL_REJECTED. This cause code is mapped to the corresponding protocol cause code, for example, "403 Forbidden" for SIP protocol.

IC_RUNTIMR_LICS_REJ

When an initial run-time license checking request is made and the call is rejected, the next action taken by the universal call module (UCM) is to invoke cause analysis on the new internal cause.

The run-time license checking is added to the UCM module. In the case of a call rejected due to run-time license management, cause analysis is invoked. The Cisco PGW 2200 Softswitch also invokes the update of run-time license management call rejection measurement and collection of the call detail record (CDR).


Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

Glossary

Table 6 contains expansions of acronyms and technical terms used in this feature module.

Table 6 Acronyms and Expansions

Acronym
Expansion

BRI

Basic Rate Interface

CDR

Call Detail Record

DPNSS

Digital private network signaling system

DS0

Digital signal level zero

EISUP

Enhanced ISUP

IMT

Inter-Machine Trunk

ISUP

ISDN User Part

MGC

Media Gateway Controller

MML

Man-Machine Language

PBX

Private branch exchange

PGW

PSTN gateway

PRI

Primary Rate Interface

QSIG

Q Signaling

RTU

Right To Use

SBE

Session Border Element

SIP

Session Initiation Protocol

TDM

Time-Division Multiplexing

UCM

Universal Call Module


CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007-2009 Cisco Systems, Inc. All rights reserved.