Table Of Contents
Quick Start Guide
Cisco Unified MeetingPlace Video Integration
Revised July 20, 2007
1 Getting Started
Video endpoints must be installed and configured before you use them. Contact your system administrator for information.
Complete information about how to use Cisco Unified MeetingPlace conferencing is available in the online help for Cisco Unified MeetingPlace Web Conferencing and Cisco Unified MeetingPlace for Outlook. A Help link appears in the top left corner of any page that has interactive content.
2 Scheduling a Video Conference
If your Cisco Unified MeetingPlace profile enables you to schedule video conferences, you can include video conferencing when you schedule a Cisco Unified MeetingPlace conference.
Scheduling a Video Conference by Using Cisco Unified MeetingPlace for Outlook
If you have Cisco Unified MeetingPlace for Outlook, you can schedule the meeting from your Microsoft Outlook calendar.
Step 1 In your Outlook calendar, double-click on the time slot you wish to schedule.
Step 2 Enter standard meeting information, such as the subject of the meeting, in the Appointment tab.
Step 3 Click the Scheduling tab and invite participants.
Step 4 Click the MeetingPlace tab.
Step 5 Check the check box to Make This a MeetingPlace Meeting.
Step 6 Enter Cisco Unified MeetingPlace meeting options, including the # of Video Callers.
Step 7 Click Advanced Settings and enter additional meeting options.
Step 8 Click Send.
Scheduling a Video Conference by Using the Web
Step 1 Go to your company's Cisco Unified MeetingPlace web home page.
Step 2 Click Schedule Meeting and sign in.
Step 3 Enter meeting information.
Step 4 Check the Reserve Video Conferencing check box.
Step 5 For # of Video Callers, enter the number of video systems you expect to participate. Optionally, invite video terminals to the meeting.
Step 6 Click Schedule.
3 Attending a Video Conference
If the video conference was not scheduled in advance, or if more participants than the scheduled number of video callers attend the conference, you can join a video conference by using the procedure in this section if all of the following apply:
•The MeetingPlace voice or web conference you want to join is currently in progress or scheduled for the current time.
•The profile of the meeting scheduler is enabled for scheduling video conferences.
•Video-conferencing resources are available on the system.
Do the following procedure to have Cisco Unified MeetingPlace call your video endpoint so you can attend a scheduled Cisco Unified MeetingPlace video conference.
Step 1 Start your video endpoint and launch your video software, if applicable.
Step 2 Join the Cisco Unified MeetingPlace web conference by using one of the following methods:
•In your Outlook calendar, double-click the entry for the meeting you want to attend, then click the link to attend the meeting. Click Yes if you receive any security warnings.
•Go to your company's Cisco Unified MeetingPlace web home page, enter the meeting ID, and click Attend Meeting. Click Yes if you receive any security warnings.
Step 3 From the Current Meeting web page, check the Select How MeetingPlace Calls You check box.
Step 4 Click Use My Video Endpoint Number.
Step 5 Enter the number that Cisco Unified MeetingPlace must dial to reach your video endpoint. This number may be automatically entered for you.
Step 6 Click Connect.
Step 7 When your video endpoint rings, answer the call. If you have questions about how to do this, see the documentation for your video endpoint.
4 Participating in a Video Conference
Once you are in the Cisco Unified MeetingPlace web meeting room, you can change your video transmission from within the meeting room.
Note You cannot enter breakout sessions by using your video endpoint. The audio channel of your video transmission remains in the main meeting room.
To Do This Do This
Mute or unmute all audio sources you are using, including your video endpoint.1
Click the Mute button:
Pause or play your visual image.
Click the Pause button:
View multiple people or view just the active speaker. (This option is not available on all systems.)
Click the Personal menu and choose an option.
1 When using Video endpoints, you cannot mute audio by using the telephone keypad.
5 Leaving or Ending a Video Conference