Cisco BTS 10200 Softswitch - Release 6.0.x Provisioning Network and Subscriber Features |
For each network and subscriber feature, the table on this page provides the Provisioning Procedure and the Feature Description: · Provisioning Procedure - The steps required to provision the feature, along with illustrative examples of the applicable CLI commands. · Feature Description - Detailed description of feature behavior, additional guidance for specific provisioning scenarios, and the end-user (subscriber) perspective on activation, interrogation, invocation, and deactivation of the feature (as applicable).
Description of the interactions among the provisioned features, including a discussion of trigger detection points (TDPs), trigger IDs (TIDs), call states, feature precedence, and feature inhibition. List of Features, TDPs, and TIDs Go to the Cisco BTS 10200 Softswitch CLI Database. Pull down the Feature Matrix option and select the feature you are looking for to see (or select All) to see the associated trigger detection points (TDPs) and trigger IDs (TIDs). In addition, you can pull down the Feature Matrix [By Table] option to see additional provisionable feature parameters. Interactive Voice Response (IVR) Functions Description of the IVR functions used with certain subscriber features on the Cisco BTS 10200 Softswitch, including RACF, SCA/SCF/SCR/DRCW, two-level AR, and NSA. Description of the lawful intercept interface supported by the BTS 10200, along with enhanced CALEA features for lawful wiretaps. Important reference material on provisioning commands and system features. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Copyright 2008 Cisco Systems, Inc. All rights reserved. |