 Feedback
|
Table Of Contents
Information Relocated—Account and Authorization Codes, Speed Call, and MLHG for SIP Endpoints Feature Module
Revised: July 10, 2010
In Release 6.0 and later, the following business and commercial functions are supported for SIP-based endpoints. This support is similar to the existing support that is provided for network-based call signaling (NCS) and MGCP endpoints. Go to each section for feature descriptions and provisioning procedures.
For the latest information on this Cisco BTS 10200 Softswitch feature, see:
Collection of Account and Authorization Codes
http://www.cisco.com/en/US/docs/voice_ip_comm/bts/6.0/protocol/guide/25sub.html#wp1064041
Cisco BTS 10200 Softswitch SIP Guide, Release 6.0.x.
See Collection of Account and Authorization Codes in MGCP Features and SIP Support (Table 2-1).
1-Digit and 2-Digit Speed Call and Group Speed Call
http://www.cisco.com/en/US/docs/voice_ip_comm/bts/6.0/protocol/guide/25sub.html#wp1064041
Cisco BTS 10200 Softswitch SIP Guide, Release 6.0.x.
See the following features listed in Table 2-1.
•
Speed Call Activation—1 Digit
•
•
•
MLHG Support for SIP Endpoints
http://www.cisco.com/en/US/docs/voice_ip_comm/bts/6.0/feature/description/fd6020sf.html#wp1739602
Cisco BTS 10200 Softswitch Network and Subscriber Feature Descriptions Guide, Release 6.0.x.
MLHG Provisioning for SIP Endpoints
http://www.cisco.com/en/US/docs/voice_ip_comm/bts/6.0/command/guide/chapter6_6.0_prov.html#wp1083768
Cisco BTS 10200 Softswitch Provisioning Guide, Release 6.0.x.