Cisco BTS 10200 Softswitch

Table Of Contents

Cisco BTS 10200 Softswitch MLHG Nonhunt Feature Module

Understanding the MLHG Nonhunt Feature

Provisioning

Cisco BTS 10200 Softswitch MLHG Nonhunt Feature Module

---

Revised: July 31, 2008

This document describes the Multiline Hunt Group (MLHG) Nonhunt feature for Release 6.0.1 of the Cisco BTS 10200 Softswitch and explains how to use it.

Understanding the MLHG Nonhunt Feature

The MLGH Nonhunt feature enables you to provision a subscriber (belonging to an MLHG group) as a nonhunt subscriber. Subsequently, when a nonhunt subscriber is called directly, and the subscriber is busy, the Cisco BTS 10200 does not perform MLHG hunting to other terminals in the MLHG.

---

Note Although the Cisco BTS 10200 will not perform MLHG hunting to other terminals for a subscriber for whom the MLHG_NON_HUNT_TERMINAL token is set to Y when that subscriber is called directly, the Cisco BTS 10200 does invoke other terminal features for which the subscriber is provisioned. However, the Cisco BTS 10200 does not invoke the call waiting feature for this subscriber.

---

If the MLHG pilot number is called, or any other member in the MLHG group (with MLHG_NON_HUNT_TERMINAL=N) is called directly, as part of the MLHG hunting, the Cisco BTS 10200 still can select the terminal of the nonhunt subscriber (with MLHG_NON_HUNT_TERMINAL=Y) to receive the call.

Provisioning

To support the MLHG Nonhunt feature, Cisco added to the Cisco BTS 10200 a new token (MLHG_NON_HUNT_TERMINAL), inserting it in the SUBSCRIBER table. The token MLHG_NON_HUNT_TERMINAL is initialized to N by default. This token only applies for subscribers that belong to the various MLHG categories (the subscriber should have a valid non-NULL MLHG_ID field).

You can set the token MLHG_NON_HUNT_TERMINAL to Y when you initially provision the subscriber or you can change it from the default (N) some time after you initially provision the subscriber.

Table 1 provides steps for provisioning a subscriber as a non-hunt subscriber. The table lists sample CLI commands with mandatory tokens.

Table 1 MLHG Non Hunt Provisioning Steps

	Task	CLI Command
Step 1	Determine the setting of the token MLHG_NON_HUNT_TERMINAL for the subscriber (sub1).	show SUBSCRIBER ID=sub1;
Step 2	Set the subscriber sub1 as a non-hunting subscriber.	change SUBSCRIBER ID=sub1; MLHG_NON_HUNT_TERMINAL=Y;
Step 3	Set the subscriber sub1 back to a hunting subscriber.	change SUBSCRIBER ID=sub1; MLHG_NON_HUNT_TERMINAL=N;

---

Note For complete CLI information, see the Cisco BTS 10200 Softswitch CLI Database.
For details on provisioning MLGH, see the Cisco BTS 10200 Softswitch Provisioning Guide, Release 6.0.x.
For information on the MLHG feature, see Chapter 3: "Subscriber Features," in the Cisco BTS 10200 Softswitch Network and Subscriber Feature Descriptions, Release 6.0.x.

---

CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0807R)

Copyright © 2008 Cisco Systems, Inc. All rights reserved