Cisco BTS 10200 Softswitch

Table Of Contents

Cisco BTS 10200 Softswitch Call Forwarding Enhancements Feature Module

Understanding the Call Forwarding Enhancements Feature

Prerequisites

Provisioning

Provisioning CF Enhancements

Provisioning CF Checking Enhancements

Announcements

Cisco BTS 10200 Softswitch Call Forwarding Enhancements Feature Module

---

Revised: July 31, 2008

This document describes the Call Forwarding (CF) Enhancements feature for Release 6.0 MR1 of the Cisco BTS 10200 Softswitch and explains how to use it.

Understanding the Call Forwarding Enhancements Feature

This feature allows a subscriber to activate CF on a new destination number (DN) without first having to deactivate it on an old DN; the new DN overwrites the old on the BTS 10200. This aligns with European CF standards. After the subscriber activates the new DN, an announcement confirms the new DN and its CF status.

This feature also allows a subscriber to check whether CF is active on a DN without having to manually enter that DN. When the subscriber checks, the system plays an announcement explaining which DNs have CF.

Prerequisites

This feature requires an announcement server that can support announcements with variable phrases. This announcement server must be able to play messages regarding subscribers' CF.

Provisioning

This section explains:

•Provisioning CF Enhancements

•Provisioning CF Checking Enhancements

Provisioning CF Enhancements

This section explains how to activate CF on a new DN without deactivating on the old DN.

---

Step 1 On the BTS, enter the following command:
cli> add ca_config type=CF-RE-ACTIVATION;value=y;

---

Note For complete CLI information, see the Cisco BTS 10200 Softswitch Command Line Interface Database.

---

---

Provisioning CF Checking Enhancements

This section explains how to let subscribers hear an announcement of their DNs with CF.

---

Step 1 On the BTS, enter the following command:
cli> add ca_config type=CF-INTERROG-WITHOUT-NUM;value=y;

---

Announcements

These features require the following cause codes, included in the 6.0 MR1 upgrade:

•FS_CAUSE_CF_ACT_DN_PLAY_SUCC

•FS_CAUSE_CF_INT_DN_PLAY_SUCC

CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0807R)

Copyright © 2008 Cisco Systems, Inc. All rights reserved.