Cisco BTS 10200 Softswitch - Release 4.5.x
Adding Subscribers and Assigning Services
Subscriber provisioning is used to add customers and assign telephony services to them. The applicable subscriber provisioning steps are included in procedures throughout the Provisioning Guide.
Provisioning Subscribers on IADs, ATAs, and eMTAs
To provision subscribers on IADs, ATAs, or eMTAs, select a link from the list below.
IAD Subscriber Provisioning - Provision the Cisco BTS 10200 Softswitch to communicate with a Cisco IAD2421 to support local subscriber on-net calls.
ATA Subscriber Provisioning - Provision the Cisco BTS 10200 Softswitch to communicate with Cisco ATA 186 and 188 residential gateways to support local subscriber on-net calls.
PacketCable Subscriber Provisioning - Provision the Cisco BTS 10200 Softswitch to communicate with eMTAs (or MTAs) to support local subscribers in a PacketCable network.
Note: For additional procedures applicable to PacketCable signaling, see the PacketCable and Event Message Provisioning and Operations Guide.
Provisioning Multiline Hunt Groups (MLHGs) and Centrex Groups
MLHG and Centrex Provisioning - Provisioning procedures for MLHG and Centrex groups.
The following subscriber features are provided for Centrex users only:
· Call Hold (CHD)
· Direct Inward/Outward Dialing for Centrex
· Directed Call Pickup (with and without Barge-In)
· Distinctive Alerting/Call Waiting Indication (DA/CWI)
Note: Descriptions and provisioning procedures for these features are included on the Subscriber Feature Provisioning page.
Copyright 2008 Cisco Systems, Inc. All rights reserved.