Table Of Contents
Preface
Revision History for Release 4.4
Organization
Conventions
Related Documents
Obtaining Documentation
World Wide Web
Documentation CD-ROM
Ordering Documentation
Documentation Feedback
Obtaining Technical Assistance
Cisco.com
Technical Assistance Center
Contacting TAC by Using the Cisco TAC Website
Contacting TAC by Telephone
Preface
The Cisco BTS 10200 Softswitch SIP Protocol Provisioning Guide details support for Session Initiation Protocol (SIP) devices and trunks in Release 4.4. This guide serves as a basic guidance for provisioning SIP devices (Cisco ATA 186 and 188, and Cisco IP Phones 7940, 7960, 7905, 7912) and SIP trunks for use with the Cisco BTS 10200. The book is an addition to the existing Cisco BTS 10200 Softswitch documentation.
Revision History for Release 4.4
This document includes all of the information that was contained in the previous issues (the Release 4.1 and 4.2 SIP Protocol Provisioning Guide), and has been updated as follows for Release 4.4.
Cisco BTS 10200 Softswitch Release
|
Changes
|
Release 4.1
|
Feature/document is introduced.
|
Release 4.2
|
The Release 4.2 SIP-T Feature Module was added to documentation set.
The Reliable Provisional Responses sections were updated in both the SIP Protocol User and Provisioning Guides.
To see the updated information, refer to these sections:
• Reliable Provisional Responses (SIP Protocol User Guide)
• Reliable Provisional Responses (SIP Protocol Provisioning Guide)
|
Release 4.4
|
The TrunkGroup Audit for the SIP Adapter feature was added to the documentation.
To see the new information, refer to the following Trunk Group Audit for SIP Adapter section in the SIP Protocol User Guide.
For provisioning information, refer to TrunkGroup Audit for the SIP Adapter section in the SIP Protocol Provisioning Guide.
|
Organization
This document is organized as follows:
•
Chapter 1, "Provisioning SIP Devices"
•
Chapter 2, "Provisioning SIP Trunks"
•
Chapter 3, "Provisioning Voice-Mail"
•
Appendix A, "Sample Configuration Files"
•
Glossary
Conventions
This document includes the following conventions:
Note
Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Related Documents
This Release 4.4 SIP Protocol Provisioning Guide should be used in conjunction with the previous Cisco BTS 10200 Softswitch documents:
•
Cisco BTS 10200 Softswitch Release Notes for Release 4.4
•
Cisco BTS 10200 Softswitch SIP Protocol User Guide
•
Cisco BTS 10200 Softswitch Physical and Network Site Surveys and Data Sheets
•
Cisco BTS 10200 Softswitch Cabling Procedures
•
Cisco BTS 10200 Softswitch System Description
•
Cisco BTS 10200 Softswitch Application Installation Procedures
•
Cisco BTS 10200 Softswitch Operations Manual
•
Cisco BTS 10200 Softswitch Event Messages Guide
•
Cisco BTS 10200 Softswitch Billing Interface Guide
•
Cisco BTS 10200 Softswitch Command Line Interface Reference Guide
•
Cisco BTS 10200 Softswitch CORBA Installation and Programmer's Guides
Obtaining Documentation
The following sections provide sources for obtaining documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at the following sites:
•
http://www.cisco.com
•
http://www-china.cisco.com
•
http://www-europe.cisco.com
Documentation CD-ROM
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Ordering Documentation
Cisco documentation is available in the following ways:
•
Registered Cisco Direct Customers can order Cisco Product documentation from the Networking Products MarketPlace:
http://www.cisco.com/public/ordsum.html
•
Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:
http://www.cisco.com/go/subscription
•
Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by calling 800 553-NETS(6387).
Documentation Feedback
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, use the response card behind the front cover of your document, or write to the following address:
Attn Document Resource Connection
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.
Cisco.com
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
To access Cisco.com, go to the following website:
http://www.cisco.com
Technical Assistance Center
The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
Contacting TAC by Using the Cisco TAC Website
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website:
http://www.cisco.com/tac
P3 and P4 level problems are defined as follows:
•
P3—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
•
P4—You need information or assistance on Cisco product capabilities, product installation, or basic product configuration.
In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.
To register for Cisco.com, go to the following website:
http://www.cisco.com/register/
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website:
http://www.cisco.com/tac/caseopen
Contacting TAC by Telephone
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
P1 and P2 level problems are defined as follows:
•
P1—Your production network is down, causing a critical impact to business operations if service is not restored quickly. No workaround is available.
•
P2—Your production network is severely degraded, affecting significant aspects of your business operations. No workaround is available.