Table Of Contents
Overview of Cisco EPOM
Cisco EPOM Features
The Cisco EPOM Database
Cisco EPOM Server Requirements
Cisco EPOM Server supporting 5 simultaneous client and 5 BTS servers
Cisco EPOM Server supporting 20 simultaneous client and 10 BTS servers
Default Port Assignments
Cisco EPOM Client Requirements
For Windows
For Solaris
Cisco BTS 10200 Server Requirements
Cisco BTS 10200 and Cisco EPOM Compatibility
External RADIUS Server requirements
Overview of Cisco EPOM
This chapter contains the following topics:
•
Cisco EPOM Features
•Cisco EPOM Server Requirements
•Cisco EPOM Client Requirements
•Cisco BTS 10200 Server Requirements
•Cisco BTS 10200 and Cisco EPOM Compatibility
Cisco EPOM Features
Cisco Extensible Provisioning and Operations Manager (Cisco EPOM) is a web-based application for real-time provisioning of the Cisco BTS 10200 Softswitch that allows authorized users to Show, Add, Edit, Delete, and check the status of Cisco BTS 10200 components.
Provisioning tasks in Cisco EPOM generally match tasks done by using the Cisco BTS 10200 Softswitch CLI or MAC interface, but the tasks are done through a web-browser interface. Common multistep procedures are simplified by being grouped into tasks that are done by task wizards.
Authorized Cisco EPOM administrators set up and manage the Cisco EPOM server software and perform Cisco EPOM user administration and network setup tasks:
•Start and stop the Cisco EPOM web server software. (See the "Starting Cisco EPOM" section.)
•Configure EPOM authentication via a separate RADIUS server.(See the "Configuring EPOM authentication via a separate RADIUS server" section
•Configure SSL (Secure Socket Layer) Corba properties and certificates for secure Corba communication between Cisco EPOM and Cisco BTS 10200.(See the "Configuring SSL Corba for secure communication between Cisco EPOM and Cisco BTS 10200" section
•Add, Edit, and Delete users, user groups, and domains. (See the "Adding Domains, Groups, and Users" section.)
•Assign users to groups. (See the "Adding Users and Assigning Them to Groups" section.)
•Assign domain access (either read/write or read only) to groups. (See the "Adding Groups and Assigning Them to Domains" section.)
•Assign a Cisco BTS login to a Cisco EPOM group. This restricts a Cisco EPOM user's access to that of the assigned Cisco BTS user login. (See the "Setting Up Cisco EPOM Security" section.)
•Set up the network initially. (See the "Setting Up a Network" section.)
•Show, Add, Edit, and Delete single or multiple Cisco BTS 10200 devices. (See the "Bulk Command Provisioning" section.)
•Check boxes in the Edit page of EPOM GUI screens. Edit page will be initially loaded with invisible check boxes and it will be visible only when user selects any of the field to update.(See "Editing a Component in the Cisco BTS 10200 Configuration" section
•Set up custom navigation trees. (See the "Creating Custom Navigation Trees" section.)
•Create custom provisioning flows. (See the "Customizing Cisco EPOM Provisioning Flows" section.)
•View reports and download them to a Cisco BTS EMS server. (See the "Viewing Reports" section.)
•Manage EPOM BTS Corba Cache via Online Cache Management."Managing Cisco EPOM Corba Cache" section
•Import and export Cisco BTS configurations over secure connections. "BTS Export" section on page 8-10
•Troubleshoot problems. See "Troubleshooting Cisco EPOM."
The Cisco EPOM Database
The Cisco EPOM database maintains Cisco EPOM administrative data (users, groups, and domains) and the inventory of Cisco BTS 10200 devices. Device-level information (such as subscribers, subscriber features, and communication with media gateways) is retrieved from the Cisco BTS EMS server devices in real time, and is not stored in the Cisco EPOM database.
Cisco EPOM Server Requirements
Platform requirements for Cisco EPOM 4.4(1) are:
Cisco EPOM Server supporting 5 simultaneous client and 5 BTS servers
•Sun workstation (440 MHz or more)
•1 GB RAM
•2 GB disk space
•Sun Solaris 8 operating system
Cisco EPOM Server supporting 20 simultaneous client and 10 BTS servers
•Sun Ultra-60 workstation (440 MHz or faster, dual processor)
•2 GB RAM
•4 GB disk space
•Sun Solaris 8 operating system
Default Port Assignments
Note You can change these port assignments during installation. See the "Accessing Cisco EPOM" section.
•MySQL port is 3310.
•Tomcat non-secure port is 8080.
•Tomcat secure port is 443.
•Tomcat shutdown port is 8041.
Cisco EPOM Client Requirements
For Windows
•Microsoft Internet Explorer, Version 5.5 or higher.
•Netscape 6.2 or higher.
For Solaris
•Mozilla 1.1or higher.
(You can download Mozilla from http://www.sun.com/software/solaris/browser)
Note If you attempt to access Cisco EPOM with unsupported web browser versions, appropriate error message will be displayed:
Cisco BTS 10200 Server Requirements
•Cisco BTS10200 EMS Server 4.4.1
Or
•Cisco BTS 10200 EMS Server 4.4.0
Or
•Cisco BTS 10200 EMS Server 4.2.x
Or
Cisco BTS 10200 EMS Server 4.1.x
Or
Cisco BTS 10200 EMS Server 3.5.x
•Cisco BTSCis software package
Cisco BTS 10200 and Cisco EPOM Compatibility
Cisco BTS 10200 Release Number
|
Cisco EPOM Release Number
|
Cisco BTS 3.2
|
Cisco EPOM 1.1
|
Cisco BTS 3.3
|
Cisco EPOM 1.3
|
Cisco BTS 3.5.x with Visigenics CORBA
|
Cisco EPOM 1.3
|
Cisco BTS 3.5.x with Non Secure OpenOrb CORBA
|
Cisco EPOM 1.5
|
Cisco BTS 4.1.0 with Non Secure OpenOrb CORBA
|
Cisco EPOM 2.1
|
Cisco BTS 4.2.0 with Non Secure OpenOrb CORBA
|
Cisco EPOM 4.2(0)
|
Cisco BTS 4.4.0 with Secure or Non Secure OpenOrb CORBA
|
Cisco EPOM 4.4(0)
|
Cisco BTS 4.4.1 with Secure or Non Secure OpenOrb CORBA
|
Cisco EPOM 4.4(1)
|
Note You must use compatible EPOM and BTS releases only
External RADIUS Server requirements
Any platform capable of running Radius IETF (International Engineering Task Force).
Radius software must implement RADIUS IETF protocol.
