Table Of Contents

Cable and Port Specifications

Accessory Kit for the Cisco UCS Fabric Interconnect

Console Cable

Console Port

Supported Power Cords and Plugs

AC Power Cord Illustrations

Jumper Power Cord

Cable and Port Specifications

---

This appendix provides cable and port specifications, and includes the following sections:

•Accessory Kit for the Cisco UCS Fabric Interconnect

•Console Port

•Supported Power Cords and Plugs

•Jumper Power Cord

Accessory Kit for the Cisco UCS Fabric Interconnect

The Cisco UCS 6120XP 20-Port Fabric Interconnect accessory kit includes the following items:

•2 slider rails

•2 rack-mount guides

•2 rack-mount brackets

•12 M4 x 0.7 x 8-mm Phillips countersunk screws

•10 10-32 rack nuts

•10 10-32 x 3/4-inch Phillips pan-head screws

•1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter

•1 ground lug kit

•1 ESD wrist strap

•1 pointer document (specifies where to find the online product documentation)

---

Note Additional parts can be ordered from your customer service representative.

---

Console Cable

The console cable has an RJ-45 connector on one end and a DB9 connector on the other; this cable is used to connect into the RS-232 console (see Figure B-1).

Figure B-1 Console Cable

Table B-1 lists the pinouts for the RJ-45 connector on the console cable.

Table B-1 Cable Connector Pinouts

Signal Name	P1, P1-45 Pins	P2, DB-9 Pins	Signal Name
RTS	1	8	CTS
DTR	2	6	DSR
TXD	3	2	ZXD
GND	4	5	GND
GND	5	5	GND
ZXD	6	3	TXD
DSR	7	4	DTR
CTS	8	7	RTS

Console Port

The console port is an asynchronous RS-232 serial port with an RJ-45 connector.

Table B-2 lists the pinouts for the console port on the Cisco UCS 6100 Series Fabric Interconnects.

Table B-2 Console Port Pinouts  

Pin	Signal
1	RTS
2	DTR
3	TxD
4	GND
5	GND
6	RxD
7	DSR
8	CTS

Supported Power Cords and Plugs

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to a power distribution unit having IEC 60320 C19 outlet receptacles. The jumper power cords, for use in cabinets, are available as an optional alternative to the standard power cords.

The standard power cords have an IEC C19 connector on the end that plugs into the power supplies. The optional jumper power cords have an IEC C19 connector on the end that plugs into the power supplies, and an IEC C20 connector on the end that plugs into an IEC C19 outlet receptacle.

---

Note Only the regular power cords or jumper power cords provided with the chassis are supported.

---

Table B-3 lists the power cords for the Cisco UCS 6100 Series Fabric Interconnects and provides their lengths in feet and meters.

Table B-3 Power Cords for the Cisco UCS 6100 Series Fabric Interconnects 

Description	Length		Power Cord Reference Illustration
	Feet	Meters
SFS-250V-10A-AR Power Cord, 250 VAC 10 A IRAM 2073 Plug Argentina	8.2	2.5	Figure B-2
CAB-9K10A-AU 250 VAC 10 A 3112 Plug, Australia	8.2	2.5	Figure B-3
SFS-250V-10A-CN Power Cord, 250 VAC 10 A GB 2009 Plug China	8.2	2.5	Figure B-4
CAB-9K10A-EU Power Cord, 250 VAC 10 A M 2511 Plug Europe	8.2	2.5	Figure B-5
SFS-250V-10A-ID Power Cord, 250 VAC 16A EL-208 Plug South Africa, United Arab Emirates, India	8.2	2.5	Figure B-6
SFS-250V-10A-IS Power Cord, 250 VAC 10 A SI32 Plug Israel	8.2	2.5	Figure B-7
CAB-9K10A-IT Power Cord, 250 VAC 10 A CEI 23-16 Plug Italy	8.2	2.5	Figure B-8
CAB-9K10A-SW Power Cord, 250 VAC 10 A MP232 Plug Switzerland	8.2	2.5	Figure B-9
CAB-9K10A-UK Power Cord, 250 VAC 10 A BS1363 Plug (13 A fuse) United Kingdom	8.2	2.5	Figure B-10
CAB-AC-250V/13A Power Cord, 250 VAC 13 A IEC60320 Plug North America	6.6	2.0	Figure B-11
CAB-N5K6A-NA Power Cord, 250 VAC 13 A NEMA 6-15 Plug, North America	8.2	2.5	Figure B-12
CAB-C13-C14-JMPR Cabinet Jumper Power Cord, 250 VAC 13 A, C13-C14 Connectors	2.2	0.7	Figure B-13

AC Power Cord Illustrations

This section contains the AC power cord illustrations.

Figure B-2 SFS-250V-10A-AR

Figure B-3 CAB-9K10A-AU

Figure B-4 SFS-250V-10A-CN

Figure B-5 CAB-9K10A-EU

Figure B-6 SFS-250V-10A-ID

Figure B-7 SFS-250V-10A-IS

Figure B-8 CAB-9K10A-IT

Figure B-9 CAB-9K10A-SW

Figure B-10 CAB-9K10A-UK

Figure B-11 CAB-AC-250V/13A

Figure B-12 CAB-N5K6A-NA

Jumper Power Cord

Figure B-13 shows the plug connector on the optional jumper power cord for the Cisco UCS 6100 Series Fabric Interconnects. The plug plugs in to the Cisco UCS 6100 Series Fabric Interconnects power supply, while the connector plugs into the receptacle of a power distribution unit for a cabinet.

Figure B-13 CAB-C13-C14-JMPR, Jumper Power Cord