Cisco TelePresence System TX9000 and TX9200 Assembly, First-Time Setup, and Field-Replaceable Unit Guide - Use and Care Guide [Cisco TelePresence TX9000 Series]

Table Of Contents

Use & Care Guide

Maintaining the Tabletop

Cleaning the Displays

Cleaning the Camera Lens

Cleaning the Display Screens

Use & Care Guide

Revised: May 17, 2013, OL-27038-01

Maintaining the Tabletop

Caution Waxing or rubbing the surface with any type of abrasive is not recommended.

•For general daily care - use a dampened cloth with clean water.

•To remove dirt - use a mild soap and water solution. Wipe off with clean water afterward to remove the soap.

•To remove ink marks - rub the stained area with a pencil eraser.

•To polish the tabletop - use lemon oil.

Note Lemon oil is not recommended for daily use.

Cleaning the Displays

Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

Cleaning the Camera Lens

Caution Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry microfiber cloth. After cleaning, you will need to realign the camera.

Cleaning the Display Screens

Use a clean, soft cloth with warm water and mild soap to remove any marks on your Cisco TelePresence white speaker screens.

Caution Using anything other than a soft cloth, warm water and mild soap may permanently damage the display screen.

	Cisco TelePresence System TX9000 and TX9200 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
	Use and Care Guide
Cisco TelePresence System TX9000 and TX9200 Assembly, First-Time Setup, and Field-Replaceable Unit Guide Preface Overview, Required Tools, Preinstallation Checks, and List of Hardware Fasteners Room Requirements for the Cisco TelePresence System TX9000 and TX9200 Installing the Wall-Mounted Reflector Wall Structure Installing And Performing Initial Leveling of the Main Display Structure Installing the Displays and Performing Final Leveling Installing the Free-Standing Reflector Wall Structure Installing the Bezel Brackets and Vertical Bezels Installing the Electronic Hardware, Facade Brackets, Camera Assembly, and Cable Runner Starting Installation of the First Row Table Connecting and Routing the Cables Completing Installation of the First Row Table Installing the Second Row Table - TX9200 Systems Only Building the Second Row Table For a 14- and 10-Seat TX9200 System Completing Installation of the Main Display Structure First-Time Setup Use and Care Guide Field-Replaceable Unit Guide Parts List Sorted by Carton Cisco TelePresence System TX9000 and TX9200 Pallet Dimensions and Description Region- and Country-Specific Power Cords and Table Leg Power Connectors	Download this chapter Use and Care Guide Download the complete book Cisco TelePresence System TX9000 Assembly, First-Time Setup, and Field-Replaceable Unit Guide book-level PDF (PDF - 17 MB) Feedback Table Of Contents Use & Care Guide Maintaining the Tabletop Cleaning the Displays Cleaning the Camera Lens Cleaning the Display Screens Use & Care Guide Revised: May 17, 2013, OL-27038-01 Maintaining the Tabletop Caution Waxing or rubbing the surface with any type of abrasive is not recommended. •For general daily care - use a dampened cloth with clean water. •To remove dirt - use a mild soap and water solution. Wipe off with clean water afterward to remove the soap. •To remove ink marks - rub the stained area with a pencil eraser. •To polish the tabletop - use lemon oil. Note Lemon oil is not recommended for daily use. Cleaning the Displays Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry. Cleaning the Camera Lens Caution Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry microfiber cloth. After cleaning, you will need to realign the camera. Cleaning the Display Screens Use a clean, soft cloth with warm water and mild soap to remove any marks on your Cisco TelePresence white speaker screens. Caution Using anything other than a soft cloth, warm water and mild soap may permanently damage the display screen.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks