Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
Use and Care Guide
-
Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
-
Preface
-
Overview
-
Cisco TelePresence System 1100 Room Recommendations
-
Assembling and Mounting a Cisco TelePresence System 1100
-
First-Time Setup
-
Use and Care Guide
-
Field-Replaceable Unit Guide
-
Cisco TelePresence System 1100 Shipping Pallet Size, Weight, and Description of Contents
-
Region- and Country-Specific Equipment
-
Download this chapter
Download the complete book
Feedback
Table Of Contents
Use and Care Guide
Revised: September 9, 2009, OL-19695-01Cleaning the CTS 1100 Display
The display requires special consideration when cleaning. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
Tip
You can use the microfiber cloth that is provided in the CTS 1100 assembly kit to clean the display and display bezel. The part number is 51-5266-01.
If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.
