Technical Specifications
This appendix describes the technical specifications for the Cisco Nexus 5500 Platform switches and the Cisco Nexus 5000 Platform switches.
This appendix includes the following sections:
Note Specifications for cables and connectors are provided in Appendix C, “Cable and Port Specifications.”
Switch Specifications
Table B-1 lists the physical specifications for the Cisco Nexus 5596 switch.
Table B-1 Physical Specifications for the Cisco Nexus 5596 Switch
|
|
Dimensions (H x W x D) |
3.47 in. x 17.3 in. x 29.5 in. (8.8 x 43.9 x 74.9 cm) |
Weight (with two power supplies, one expansion module, and four fan modules) |
50 lb (22.68 kg) |
Table B-2 lists the physical specifications for the Cisco Nexus 5548 switch.
Table B-2 Physical Specification for the Cisco Nexus 5548 Switch
|
|
Dimensions (H x W x D) |
1.72 in. x 17.3 in. x 29.5 in. (4.4 x 43.9 x 74.9 cm) |
Weight (with two power supplies, one expansion module, and two fan modules) |
32 lb (14.51 kg) |
Table B-3 lists the physical specifications for the Cisco Nexus 5020 switch.
Table B-3 Physical Specification for the Cisco Nexus 5020 Switch
|
|
Dimensions (H x W x D) |
3.47 in. (8.8 cm) x 17.3 in. (43.9 cm) x 30.0 in. (76.2 cm) |
Weight (with two power supplies and two expansion modules installed) |
50 lb (22.680 kg) |
Table B-4 lists the physical specifications for the Cisco Nexus 5010 switch.
Table B-4 Physical Specification for the Cisco Nexus 5010 Switch
|
|
Dimensions (H x W x D) |
1.72 in. x 17.3 in. (43.9 cm) x 30.0 in. (76.2 cm) |
Weight (with two power supplies and one expansion module installed) |
35 lb (15.875 kg) |
Environmental Specifications
Table B-5 lists the environmental specifications for the Cisco Nexus 5500 Platform switches.
Table B-5 Environmental Specifications for the Cisco Nexus 5500 Platform Switches
|
|
|
Operating temperature |
32 to 104°F (0 to 40°C) |
32 to 104°F (0 to 40°C) |
Nonoperating (storage) temperature |
–40 to 158°F (–40 to 70°C) |
–40 to 158°F (–40 to 70°C) |
Humidity |
5 to 95% (noncondensing) |
5 to 95% (noncondensing) |
Altitude |
0 to 10,000 ft (0 to 300 m) |
0 to 10,000 ft (0 to 300 m) |
Table B-6 lists the environmental specifications for the Cisco Nexus 5000 Platform switches.
Table B-6 Environmental Specifications for the Cisco Nexus 5000 Platform Switches
|
|
|
Operating temperature |
32 to 104°F (0 to 40°C) |
32 to 104°F (0 to 40°C) |
Nonoperating (storage) temperature |
–40 to 158°F (-40 to 70°C) |
–40 to 158°F (–40 to 70°C) |
Humidity |
5 to 95% (noncondensing) |
5 to 95% (noncondensing) |
Altitude |
0 to 10,000 ft (0 to 300 m) |
0 to 10,000 ft (0 to 300 m) |
Expansion Module Specifications
Table B-7 lists the physical specifications for the Cisco Nexus 5020 switch expansion module.
Table B-7 Physical Specifications for the Cisco Nexus 5020 Switch Expansion Modules
|
|
Weight |
1 lb (0.5 kg) |
Power Specifications
This section describes the power specifications for the Cisco Nexus 5000 Series switches. This section includes the following topics:
Specifications for the Cisco Nexus 5596 Power Supply
Table B-8 lists the specifications for the Cisco Nexus NXA-PAC-1100W and N55-PAC-1100W AC power supplies.
Table B-8 Specifications for the Cisco Nexus NXA-PAC-1100W and N55-PAC-1100W AC Power Supplies
|
|
Maximum rated power output |
1100W |
Typical operating power consumption |
5596UP: 680W 5596T: 900W |
Maximum power consumption |
5596UP: 1079W 5596T: 1079W |
Maximum AC input current (@100VAC, 200VAC) |
13A, 7A |
Input AC voltage range |
90 to 264 VAC |
Frequency |
47 to 63 Hz |
Efficiency |
94% (50% load) |
RoHS compliance |
Yes |
Hot swappable |
Yes |
Heat dissipation |
75 BTU/hr |
Table B-9 lists the specifications for the Cisco Nexus NXA-PHV-1100W power supply.
Table B-9 Specifications for the Cisco Nexus NXA-PHV-1100W Power Supply
|
|
Maximum rated power output |
1100W |
Typical operating power consumption |
5596UP: 680W 5596T: 900W |
Maximum power consumption |
5596UP: 1079W 5596T: 1079W |
Maximum input current (@240 VDC, 380 VDC, 277 VAC) |
5.5A, 3.5A, 4.7A |
Input voltage range |
192 to 400 VDC, 90 to 295 VAC |
Efficiency |
94% (50% load) |
RoHS compliance |
Yes |
Hot swappable |
Yes |
Table B-10 lists the specifications for the Cisco Nexus N55-PDC-1100W DC Power Supply
Table B-10 Specifications for the Cisco Nexus N55-PDC-1100W DC Power Supply
|
|
Maximum rated power output |
1100W |
Typical operating power consumption |
5596UP: 680W 5596T: 900W |
Maximum power consumption |
5596UP: 1079W 5596T: 1079W |
Maximum DC input current (–40 VDC) |
32A |
Input DC voltage range |
–40 to –72 VDC |
Efficiency |
92% (at 50% load) |
RoHS compliance |
Yes |
Hot swappable |
Yes |
Heat dissipation |
450 BTU/hr |
Specifications for the Cisco Nexus 5548 Power Supply
Table B-11 lists the specifications for the Cisco Nexus 5548 750W DC power supply.
Table B-11 Specifications for the Cisco Nexus 5548 750 W DC Power Supply
DC Power Supply Properties
|
|
Maximum rated power output |
750W |
Typical operating power consumption |
390W |
Maximum power consumption |
680W |
Input current |
22A/12.5A |
Input voltage |
–40 to –72 VDC |
Frequency |
N/A |
Efficiency |
88% |
RoHS compliance |
Yes |
Hot swappable |
Yes |
Heat Dissipation |
307 BTU/hr |
Table B-12 lists the specifications for the Cisco Nexus 5548 750W AC Power supply.
Table B-12 Specifications for the Cisco Nexus 5548 750W AC Power Supply
AC Power Supply Properties
|
|
Maximum rated power output |
750W |
Typical operating power consumption |
390 W |
Maximum power consumption |
680 W |
Input current |
10A/3.75A |
Input voltage |
100 to 240 VAC |
Frequency |
50 to 60 Hz |
Efficiency |
95 to 98% (50 to 100% load) |
RoHS compliance |
Yes |
Hot swappable |
yes |
Heat dissipation |
51 BTU/hr |
Specifications for the Cisco Nexus 5020 Power Supplies
Table B-13 lists the specifications for the Cisco MDS 9200 Series750 W AC power supply.
Table B-13 Specifications for the Cisco Nexus 5020 750 W AC Power Supply
|
|
Typical Operating Power |
480 W (Typical) |
Max Power (system) |
750 W |
Input Voltage |
100–120 V/200–240 V |
Input Current |
9.2 A/4.5 A |
Frequency |
50–60 Hz |
RoHS Compliance |
Yes |
Hot Swappable |
Yes |
Heat Dissipation |
51 BTU/hr |
Dimensions (H x W x D) |
1.57 in. (0.039 m) x 4.00 in. (0.101 m) x 13.00 in. (0.330 m) |
Table B-14 lists the specifications for the Cisco MDS 9200 Series1200 W power supply.
Table B-14 Specifications for the Cisco Nexus 5020 1200 W Power Supply
|
|
Typical Operating Power |
480 W (Typical) |
Max Power (system) |
750 W |
Input Voltage |
100–120 V/200–240 V |
Input Current |
9.2 A/7.5 A |
Frequency |
50–60 Hz |
RoHS Compliance |
Yes |
Hot Swappable |
Yes |
Heat Dissipation |
491 BTU/hr |
Dimensions (H x W x D) |
1.57 in. (0.039 m) x 4.00 in. (0.101 m) x 13.00 in. (0.330 m) |
Specifications for the Cisco Nexus 5010 Power Supply
The power supplies connect to the system through panel mount connectors and connectors attach to the baseboard through cables. Three connectors on the baseboard: two for power delivery, and one for power supply control signals. Table B-15 lists the specifications for the Cisco Nexus 5010 550 W AC power supply.
Table B-15 Specifications for the Cisco Nexus 5010 550W AC Power Supply
|
|
Typical Operating Power |
340W |
Max Power (system) |
410W |
Input voltage |
90–264 VAC |
Add input current |
7.3A/2.75A |
Frequency |
47–63 Hz |
ROHS Compliant |
Yes |
Size (W x H x D) |
2.75 in. x 1.57 in. x 13.7 in. |
Hot plug capable |
Yes |
Hot swappable |
Yes |
Heat Dissipation |
1536 BTU/hr |
Transceiver Specifications
Table B-16 lists the general specifications for the 10-Gigabit Ethernet SFP+ transceiver module for the Cisco Nexus 5500 Platform switches and the Cisco Nexus 5000 Platform switches.
Table B-16 General Specifications for the 10-Gigabit Ethernet SFP+ Transceiver Module
|
|
Connector type |
LC |
— |
Wavelength |
850 nm |
— |
Core size |
50 microns |
62.5 microns |
Cable distance |
300 m |
33 m |
This section includes the following topics:
Environmental Conditions and Power Requirement Specifications for SFP+ Transceivers
Table B-17 lists the environmental conditions and power requirement specifications for the 10-Gigabit Ethernet SFP+ transceiver module for the Cisco Nexus 5500 Platform switches and Cisco Nexus 5000 Platform switches.
Table B-17 Environmental Conditions and Power Requirement Specifications for the 10-Gigabit Ethernet SFP+ Transceiver Module
|
|
|
|
|
Storage temperature |
Ts |
–40 |
— |
ºC |
Case temperature |
Tc |
0 |
70 |
ºC |
Relative humidity |
RH |
— |
— |
— |
Module supply voltage |
VccT,R |
3.1 |
3.5 |
V |
General Specifications for Cisco Fibre Channel SFP Transceivers
Table B-18 lists the general specifications for Cisco Fibre Channel SFP transceivers at 4 Gbps for the Cisco Nexus 5500 Platform switches and the Cisco Nexus 5000 Platform switches.
Table B-18 General Specifications for Cisco Fibre Channel SFP Transceivers at 4 Gbps
|
|
Connector type |
LC |
— |
Wavelength |
850 nm |
— |
Fibre type |
MMF |
— |
Core size |
50 microns |
62.5 microns |
Cable distance |
328.08 yd (300 m) |
164.04 yd (150 m) |
Transmit power |
–9 to –2.5 dBM |
|
Environmental Conditions and Power Requirements Specification for SFP Transceivers
Table B-19 provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP transceivers for the Cisco Nexus 5500 Platform switches and Cisco Nexus 5000 Platform switches.
Table B-19 Environmental Conditions and Power Requirements Specifications for SFP Transceivers
|
|
|
|
|
Storage temperature |
Ts |
–40 |
85 |
ºC |
Case temperature 1 , |
Tc |
0 |
70 |
ºC |
Relative humidity 1 |
RH |
5 |
95 |
% |
Module supply voltage 1 |
VccT,R |
3.1 |
3.5 |
V |