Table Of Contents
Managing System Hardware
Displaying Switch Hardware Inventory
Displaying the Switch Serial Number
Displaying Power Supply Status
Displaying Environment Information
Managing System Hardware
This chapter provides details on monitoring the health of the switch. It includes the following sections:
•Displaying Switch Hardware Inventory
•Displaying the Switch Serial Number
•Displaying Power Supply Status
•Displaying Environment Information
Displaying Switch Hardware Inventory
Use the show hardware command to display switch hardware inventory details. (See Example 5-1.)
Note To display modules, see the "Verifying the Status of the Switch" section.
Example 5-1 Displays the Hardware Information
Cisco MDS 9000 FabricWare
Copyright (C) 2002-2005, by Cisco Systems, Inc.
and its suppliers. All rights reserved.
Copyrights to certain works contained herein are owned by
third parties, and used and distributed under license.
Portions of this software are governed by the GNU Public License,
which is available at http://www.gnu.org/licenses/gpl.html.
system compile time: Thu Apr 21 12:48:49 2005
switch uptime is 2 days 4 hours 25 minute(s) 20 second(s)
Last reset at 188720 usecs after Mon Apr 25 11:01:12 2005
--------------------------------
Switch hardware ID information
--------------------------------
Model number is DS-C9020-20K9
Part Number is 74-3811-01
Serial number is 0426a07855
Displaying the Switch Serial Number
The serial number of your Cisco MDS 9020 Fabric Switch can be obtained by looking at the serial number label on the back of the switch or by executing the operating system show sprom mgmt-module command.
switch# show sprom mgmt-module
DISPLAY SAM sprom contents:
OEM String : Cisco Systems, Inc.
Product Number : DS-C9020-20K9
Serial Number : 0426a07855
snmpOID : 1.3.6.1.4.1.1663.1.1.1.1.26
MAC Address : 00-c0-dd-03-d4-e4
WWN : 10:00:00:0d:ec:19:cb:0e
Displaying Power Supply Status
Use the show environment power command to display the power supply status. (See Example 5-2.)
Example 5-2 Displays Power Supply Status
switch# show environment power
Displaying Environment Information
Use the show environment command to display all environment-related switch information. (See Example 5-3.)
Example 5-3 Displays All Environment Information
---------------------------
---------------------------