Cisco NAC Appliance (Clean Access)

Table Of Contents

Cisco NAC Appliance Syslog Messages

NAC Appliance Syslog Messages

Obtaining Documentation and Submitting a Service Request

Cisco NAC Appliance Syslog Messages

---

Document Number: OL-24450-01 Revised: April 13, 2011

NAC Appliance Syslog Messages

•Assorted Messages

•DM Template Update Manager

•Admin User Account Manager

•Role Info Manager

•MAC Filter Manager

•MAC Info Manager

•SNMP Manager

•Auth Server Manager

•DM Software Manager

•DB Element List

•DM Report Manager

•DM Check Manager

•Floating MAC Info Manager

•DM Check Group Manager

•DB UtilImpl

•Host Ipad dr Info Manager

•MAC Filter Timer Manager

•Admin Authentication Manager

•VLAN Map Info Manager

•Rogue AP Report Manager

•MAC Info Manager

•Switch Notification Task

•User Account Manager

•Guest Registration Page Manager

•Cisco API Filter

•Security Page Manager

Table 1 Assorted Messages 

Message	Explanation
Setting up IPsec tunnel failed for accounting server <server> as name/IP address is invalid	Setting up IPSec tunnel failed for the accounting server[RADIUS]. IP Address or Hostname is not valid.
Setting up IPsec tunnel failed with reason	While updating the Authentication server information, setting up IPSec tunnel failed.
<SubnetAddress>/<SubnetMask could not be added to global static route list	SubnetAddress/SubnetMask could not be added to global static route list. Database error, not able to execute SQL statement.
<SubnetAddress>/<SubnetMask could not be added to Clean Access Server <IPAddress> static route list	SubnetAddress/SubnetMask could not added to Clean Access Server static route list. Clean Access Server may not be accessible or down.
Failed to add <SubnetAddress>/<SubnetMask> subnet - overlapped with <SubnetAddress>/<SubnetMask>	Failed to add the SubnetAddress/Mask. Selected Subnet Address/Mask is overlapping with existing subnetAddress/Mask.
<Name> bears an existing rule Id, cannot be added
<subnetaddress/subnetmask> could not be added to the ARP list (Database error)	Database error while inserting ARP entry into arp_info table.
<subnetaddress/subnetmask> could not be removed from the ROUTE list (Database error)	Database error while deleting the subnet entry from the arp_info table.
<MAC_ADDRESS> could not be added to the AP MAC list (Database error)	Database error while adding Access Point's MAC Address to access_point table.
Could not be added to the AP MAC list	Unable to add Access Points MAC Address to click.
Resetting AS cache failed when updating AS support list	Error occurred during the setting of cache for Anti Spyware support list.
Resetting AV cache failed when update AV support list	Error occurred during the setting of cache for Anti Virus support list.
<subnetaddress>/<subnetmask> could not be updated in the SUBNET list (Database error)	Database error while deleting subnet info entry from subnet_info table.
<subnetaddress>/<subnetmask> could not be updated in the SUBNET list	Unable to add subnet entry from the click tables.
<subnetaddress>/<subnetmask> could not be added in the SUBNET list (Database error)	Database error while adding subnet info entry from subnet_info table.
(API <apiName>), Failed	Displays the reason for failure of the API method.
Automatic rules update scheduled at <time> is failed.	This comes when the scheduled automatic rule update failed at the mentioned time.
License check failed, <message>	This comes when license validation fails (for example, license would have expired).
Cisco Clean Access product license is invalid or expired	This comes when license validation fails (for example, license would have expired or is invalid).
<UserMAC>, <UserName>, <UserHost> - Holes reported by plugin #	Nessus Scan Eventlog reported Holes.
Clean Access Server <IPAddress> is disconnected.	This comes when the Clean Access Server with the mentioned IP gets disconnected from the Clean Access Manager.
Timer of certified device list <Name> already exists! Failed to add new timer!	A certified device list timer with this name exists. A different name should be chosen for the new timer.
Could not update traffic policy to <IPAddress>	This message appears when Clean Access Manager is unable to publish the traffic policies to a Clean Access Server. The Clean Access Server IP address is shown. This error condition should correct by itself on the next publish retry.
Could not update traffic policy to all SecureSmarts, policies will be published whenever connected	This message appears when Clean Access Manager is unable to publish the traffic policies to all the CASes. This error condition should correct by itself on the next publish retry.
Invalid Admin auto-logout interval, Setting Auto-Logout Interval to MAX VALUE, <min> minutes	This message appears when Admin auto-logout time is not within 0 to 120 minutes. The value will be set to 120 minutes.
<Name> could not be added to the Hotspot list (Database error)	This message appears when there is a database error while adding to hotspot list. The operation should be retried.
<Name> could not be removed from the Hotspot list (Database error)	This message appears when there is a database error while removing from hotspot list. The operation should be retried.
AutoConnectManager failed relinking Clean Access Manager with CAS- <IPAddress>	This message appears when auto connect manager fails to publish to Clean Access Server. This action will be retried automatically.
Could not update DNS server to <IPAddress>	User triggered DNS server changes were not applied to <Clean Access Server>.
Could not update DNS server to all SecureSmarts, DNS servers will be published whenever connected	User modified host policies, but they are no Clean Access Servers configured yet or connected at that time.
<string> could not be added to the NAT mapping list (Database error)	Unable to save the NAT information.
<string> could not be added to the NAT mapping list	Unable to apply the NAT information to Clean Access Server.
<string> could not be removed from the NAT mapping list	Unable to remove the NAT mapping information from Clean Access Server.
<string> could not be removed to the NAT mapping list (Database error)	Unable to delete the NAT mapping information from the Database.
Clean Access Server <IPAddress> is out-of-sync.	The config on Clean Access Server is out of sync with NAC Manager.
License is invalid or has been expired	License of the Clean Access Server is invalid or expired.
Null UI	Null User object is passed.
Maximum limit for users supported per Clean Access Server has been reached	Maximum limit for users supported per Clean Access Server reached.
<identity_string> - Out-of-band login attempt failed (Database error)	Failed to add the out-of-band <user> to the Database.
<identity_string> - Out-of-band login attempt failed (Database error)	Failed to add the out-of-band <user> to the Database.
Link between Clean Access Server and Clean Access Manager failed	Clean Access Server not reachable.
<identity_string> - Logout attempt failed	Failed to logout the <user> from Clean Access Server.
Automatic policy sync failed, <message>	Unable to sync policy due to <reason>.
Automatic policy sync, Failed sync to <host>	Unable to sync policy to <host>.
Could not update bandwidth policy to <IPAddress>	Unable to update the bandwidth policy to <Clean Access Server>.
Could not update policy to all SecureSmarts, "bandwidth policies" will be published whenever connected	Unable to apply the bandwidth changes to Clean Access Servers. The configured Clean Access Servers are in disconnected state or not configured.
Could not be added to the MAC list (Database error)	Unable to add the MAC list to the Database.
Could not be added to the MAC list	Unable to apply the MAC list to the Clean Access Server.
Unable to decrypt SNMP v3 secrets using master key	Decrypting the password for SNMP v3 user in Device Profile failed.
SNMP trap is received from switch [<IPAddress>] which is NOT in database.	SNMP trap is received from a switch, with mentioned IP Address, that is not added to the devices.
SNMP trap is received from switch [<IPAddress>] which is DISABLED in database.	SNMP trap is received from a switch, with mentioned IP Address, which is disabled due to reasons like too many consecutive write failures.
<user> user account exists, choose a different name	New user account trying to be added exists in Database.
<user> user account setup failed	New user account creation failed in Database.
Out-of-band - unable to set a new VLAN on this port	Unable to set new VLAN on the port for a out-of-band user.
Domain authentication server information not set	Windows NT Domain Authentication server information is not set.
Illegal argument	Server or user name or password is null.
Role ID is not a number	Retrieved role ID associated with auth server is not in numeric format.
Domain authentication server information not available	This message is thrown upon when given authentication server info is null during login validation.
Invalid Radius authentication server settings	This message is thrown when Radius authentication server's hostname/Shared secret is NULL/empty.
<string>- User-Specific Session Timeout	User is logged off as user specific session timed out.
<string> - Session Timeout	Role specific session timeout.
<loginid>'s guest account could not be removed	There is an error while removing the guest account from the guest_account table.
Out-of-band Heartbeat Timeout, [<MAC> ## <AUTH_IP>/<IPADDRESS>] from Clean Access Server [<SSIP>]. Not able to remove user from Clean Access Manager	These lines are actually used for debugging. Written with "DEBUG" enabled.
Request is missing some security credential (Clean Access Manager admin). Requested URI:	If this is not a valid filter request and is encountered on the Clean Access Manager.
Setting up IPsec tunnel failed with reason	Setting up IPSec tunnel failed during handling tunnel changes.
Setting up IPsec tunnel failed for auth server < server > as name/IP address is invalid	Setting up IPSec tunnel failed for given auth server due to invalid IP address.

Table 2 DM Template Update Manager 

Message	Explanation
Automatic Cisco NAC Windows Agent update scheduled at <time> is failed.	The scheduled automatic update of the Windows agent failed at the mentioned time.
Automatic Cisco NAC Macintosh Agent update scheduled at <time> is failed.	The scheduled automatic update of the Macintosh agent failed at the mentioned time.
Automatic Cisco Compliance Module for Windows update scheduled at <time> is failed.	The scheduled automatic update of the Windows compliance module failed at the mentioned time.
Automatic Cisco Compliance Module for Macintosh update scheduled at <time> is failed.	The scheduled automatic update of the Macintosh compliance module failed at the mentioned time.
Automatic AV/AS list (Windows) update scheduled at <time> is failed	The scheduled automatic update of the Windows AV/AS list failed at the mentioned time.
Automatic AV/AS list (Macintosh) update scheduled at <time> is failed	The scheduled automatic update of the Macintosh AV/AS list failed at the mentioned time.
Resetting AV cache (Windows) failed for automatic AV/AS list update scheduled at <time>	A new Windows AV scheduled update is received, but the received AV could not be set to internal cache for later use.
Resetting AS cache (Windows) failed for automatic AV/AS list update scheduled at <time>	A new Windows AS scheduled update is received, but the received AS could not be set to internal cache for later use.
Resetting AV cache (Macintosh) failed for automatic AV/AS list update scheduled at <time>	A new Macintosh AV scheduled update is received, but the received Macintosh AV could not be set to internal cache for later use.
Resetting AS cache (Macintosh) failed for automatic AV/AS list update scheduled at <time>	A new Macintosh AS scheduled update is received, but the received Macintosh AS could not be set to internal cache for later use
Automatic host policy update scheduled at <time> failed	A scheduled update of host policy package failed at the mentioned time.
Automatic OS detection update scheduled at <time> failed	A scheduled update of OS detection package failed at the mentioned time.
Automatic L3 Applet web client update scheduled at <time> failed	A scheduled update of L3 Applet web client package failed at the mentioned time.
Automatic L3 ActiveX web client update scheduled at <time> failed	A scheduled update of L3 ActiveX web client package failed at the mentioned time.
Automatic out-of-band switch OIDs update scheduled at <time> failed	A scheduled update of out-of-band switch OID list (for supported switches) failed at the mentioned time.
Automatic Default L2 Policies update scheduled at <time> failed	A scheduled update of L2 policies package failed at the mentioned time.
Automatic Cisco NAC Web Agent update scheduled at <time> failed	A scheduled update of NAC web agent failed at the mentioned time.
Automatic Cisco NAC Download Facilitator (ActiveX) update scheduled at <time> failed	A scheduled update of NAC Download Facilitator (ActiveX) failed at the mentioned time.
Automatic Cisco NAC Download Facilitator (Applet) update scheduled at <time> failed	A scheduled update of NAC Download Facilitator (Applet) failed at the mentioned time.
Automatic Rules/AV list Update - Failed	This is a generic message indicating an error while doing a scheduled update of Rule/AV list.

Table 3 Admin User Account Manager 

Message	Explanation
Invalid Admin credentials (null)	Admin username or password is null when validating Admin Account.
Admin Account is disabled	Admin Account is disabled.
Invalid Admin account group	Admin user not a part of valid Admin Groups.
Admin account group is disabled	Admin Group itself is disabled.
Invalid admin group. Admin group setup failed	Addition of a new Admin Group failed. The Admin Group entry was NULL.
Invalid Admin user. Admin user setup failed	Addition of a new Admin User failed. The Admin User entry was NULL.
Invalid Admin group	Deletion of a an Admin Group failed. The Admin Group entry was NULL.
Admin group deletion failed	Database error while deleting the Admin Group entry.
Admin group update failed	Database error while updating the Admin Group entry.
Admin group exists, choose a different name	Admin Group with the same name exists in the database.
Admin group does not exist, invalid Admin group	While adding an Admin Group, the group ID that was assigned is invalid. When adding a new group the group ID should be -1. When updating an existing group the group ID should be the group ID of an existing group. If the group ID is unavailable in Database then this error is thrown.
Admin user does not exist, invalid user	While adding an Admin User the user ID that was assigned is invalid. For adding a new user it should be -1 and for updating an existing user it should be a valid ID. If the user ID is unavailable in the database then this error is thrown.
Admin user exists, choose a different name	Admin User with the same name exists in the database.
Admin user update failed	Database error while updating the Admin User Entry.
Admin user deletion failed	Database error while deleting the Admin User Entry.
Invalid Admin user	Deletion of Admin User failed. The Admin User entry was NULL.
External auth server no longer exists	Unable to get the External Auth server while validating the Admin user account.

Table 4 Role Info Manager 

Message	Explanation
<role> role exists	Role exists.
Client temporary role exists, role cannot be created	Temporary role exists. Create a new temporary role with different name.
<role> role is created successfully	Role is created successfully.
<role> role cannot be created	Database error while adding role info to role_info table.
<role> role exists	During the modification of a role - if the existing role ID and the role ID that is being queried do not match then this error is thrown.
Updating role <role> failed, Clean Access Server <IPAddress> is not connected	Clean Access server is not connected.
Unauthenticated role cannot be deleted	Unauthenticated Role is a default role and cannot be deleted.
Role <role> cannot be deleted because it's used by certified device timer	CDL timer is using the role. So, role cannot be deleted.
Role <role> cannot be deleted because it cannot be removed from Database	Database error while deleting the role info.

Table 5 MAC Filter Manager 

Message	Explanation
<MACAddress> could not be added to the certified device list (Database error)	The MAC address could not be added to the certified devices list in the Clean Access Manager's database.
<MACAddress> could not be added to the certified device list	The MAC address could not be added to the certified devices list in the click module of Clean Access Server.
Failed publishing MacFilterEntry to <IPAddress>	The MAC address could not be published to the certified devices list in the click module of Clean Access Server.
<MACAddress> could not be removed to the certified device list	The MAC address could not be removed from the certified devices list in click module of Clean Access Server.
Failed to remove MacFilterEntry from <IPAddress>	The MAC address could not be removed from the certified devices list in click module of Clean Access Server identified by the IP address.
Certified device list could not be cleared (Database error)	The certified devices list could not be cleared from the Clean Access Manager's database.
Certified device list could not be cleared	The certified devices list could not be cleared from the click module of Clean Access Server.

Table 6 MAC Info Manager 

Message	Explanation
<MACAddress> is not in the MACInfo list	The given MAC is not a certified device and cannot be removed.
License is invalid or expired	NAC Manager license is either invalid or expired.
Maximum limit for Clean Access Servers support reached	Maximum limit for Clean Access Servers supported has been reached.
Unable to get version number for server <IPAddress>	Unable to get the NAC version from the Clean Access Server.
Invalid version number for server <IPAddress> version=<version>	Clean Access Server, Clean Access Manager version number mis-match. (Both have to be same version.)
GloballyUniqueSecureSmartKey is not valid. Restart the Clean Access Server.	Invalid key found for Clean Access Server. Restarting the server.
Conflicting Clean Access Server with IP address <IPAddress> must first be removed.	Clean Access Server with IP Address exists on NAC Manager.
Could not connect to <IPAddress>	Unable to connect to that IP Address.
<CAS> could not be removed from Clean Access Manager (used by certified device list timer	Clean Access Server with mentioned IP Address could not removed from this Clean Access Manager as Clean Access Server is used by CDL timer.
<IPAddress> could not be removed from Clean Access Manager (Database error)	Unable to delete from the local Database.
<IPAddress> is not configured in Clean Access Manager	Trying to update the incorrect <Clean Access Server> which does not exist.
<IPAddress> could not be updated to Clean Access Manager (Database error)	Unable to save the information to the NAC Manager Database.
Could not update host policy to <IPAddress>	Unable to update host policy to Clean Access Server.
Could not update host policy to all SecureSmarts, host policies will be published whenever connected	Unable to update host policy to Clean Access Servers as they are either not configured or not connected.

Table 7 SNMP Manager 

Message	Explanation
Failed to map the implementation for switch model [<Name>]	Unable to find the switch model implementation.(Only true for releases up to 4.8).
Failed to load the class for switch model [<Name>]	Unable to load the switch model implementation class (Only true for releases up to 4.8).
Failed to find the implementation for switch trap receiver in <prop_file>	Failed to find the trap receiver implementation.
Failed to initialized SNMPManager	SNMP manager could not be initialized.
Failed to load the class for trap receiver	Failed to load the trap receiver.
Unable to process out-of-band login request from <identity_string>. Cause, <line>	Unable to process out-of-band login request due to <cause>.

Table 8 Auth Server Manager 

Message	Explanation
<provider> is already configured in authentication server list	Given provider exists in auth server list in Database.
<provider> could not be added to the authentication server list (Database error)	Given provider could not be added to auth server list in Database.
<provider> is not a valid authentication server	Given provider is of invalid auth server type.
<provider> could not be updated to authentication server list (Database error)	Given provider information could be updated to auth server list in Database.
Could not remove mapping rules for <provider> (Database error)	Mapping rules for given provider could not be removed from Database.
Could not remove provider [<provider>] (used by certified device timer)	Could not remove provider used by certified device timer.
<provider> could not be removed to authentication server list (Database error)	Provider information could not be removed from database.

Table 9 DM Software Manager 

Message	Explanation
<Name> cannot be modified in the requirements	While editing the requirements, not able to execute the SQL statement. Database error.
<Name> is not an existing requirement, cannot be modified	This is not executable test case.
Invalid requirement(null), could not be modified	This is not executable test case.
Invalid requirement(null), could not be removed	This is not executable test case.
<Name> cannot remove from requirements	While deleting requirements, not able to execute the SQL statement. Database error.

Table 10 DB Element List 

Message	Explanation
Failed to add element #<Index> to table	Database error while inserting a row into the table.
Failed to update element #<Index> to table	Database error while updating an existing row of the table.
Failed to remove element #<Index> to table	Database error while removing an existing row from the table.
Failed to remove element from table	Remove operation called on a NULL entry. Database throws "unable to remove element from table" error.

Table 11 DM Report Manager 

Message	Explanation
User: <Name>, report cannot be added to Database	Database error when adding the report for user.
Invalid DMReport to add	Addition of a Report operation called with report entry as NULL.
User: <Name>, report cannot be removed to Database	Database error when removing the report.
Invalid DMReport to remove	Deletion of a Report operation called with report entry as NULL.
Cannot delete reports	Database error while deleting reports.

Table 12 DM Check Manager 

Message	Explanation
Invalid Check (null)	The object encapsulating a check is null when it is being added.
<Name> bears an existing check Id, cannot be added	The check being added exists in the Clean Access Manager's database.
<Name> cannot be modified	A check cannot be modified or a new check is being added using a check template.
<Name> cannot be added to the Software Checklist	A requirement check cannot be added to the Clean Access Manager's database.

Table 13 Floating MAC Info Manager 

Message	Explanation
<MAC_Address> could not be updated in the Floating MAC list (Database error)	MAC Device with the type `0' allows it to be certified only for the duration of the user session called floating MAC list. Cannot update the Floating MAC list, SQL query cannot execute. Database error.
<MAC_Address> could not be added to the Floating MAC list (Database error)	Cannot add to Floating MAC list, SQL query cannot execute. Database error.
<MAC_Address> could not be removed from the Floating MAC list (Database error)	Cannot be removed from Floating MAC list, SQL query cannot be executed. Database error.

Table 14 DM Check Group Manager 

Message	Explanation
A rule exists with same name <Name>	A rule with the same name exists. Choose another name to create the rule.
<Name> cannot be added	Rule cannot be created. A rule with the name exists, select another name to create the rule.
<Name> cannot be added	Check cannot be created. Check with the name exists. Choose another check name to create the Check.
<Name> cannot be modified	While updating check, SQL query cannot execute.
Invalid Rule (null)	Checks associated to this rule are modified. For example, check1 is created with Windows XP(All), rule1 created with OS Windows XP(All) and check with check1. Later, go to check and modify the OS from Windows XP(All) to Windows Vista (All). This scenario rule 1 will show as Invalid rule.
<Name> is not an existing rule, cannot be modified	Is not an executable test case.
<Name> cannot be removed	While deleting the Check, SQL query cannot execute. Database error.

Table 15 DB UtilImpl 

Message	Explanation
Still trying to close Remote Database <REMOTE_HOST> database. Keep/Bring peer node down	This message appears when closing the remote database connections taking longer than a minute. The administrator should restart the standby service only after the remote database connections are successfully closed.
Closed connections to peer <REMOTE_HOST> database. Restart peer node to bring database in sync	This message appears when the active CAM is unable to sync data to standby CAM. This can occur when standby machine or eth1 connection is down. The remote database connections will be closed and the database sync will not happen. On seeing this message, administrator should restart the standby service.
Timeout on peer <REMOTE_HOST> database restore.	This message appears when the standby machine is unable to sync the database from active in two minutes. The remote database connections will be closed and the database sync will not happen. On seeing this message, administrator should restart the standby service.

Table 16 Host Ipad dr Info Manager 

Message	Explanation
Could not get host IP addresses from <IPAddress>	Host IP Address could not be retrieved from Clean Access Server with mentioned IP Address.
Could not remove host IP addresses from <IPAddress>	Host IP Address could not be removed from Clean Access Server with mentioned IP Address.
Could not clear host IP addresses from <IPAddress>	Host IP Address could not be cleared from Clean Access Server with mentioned IP Address.

Table 17 MAC Filter Timer Manager 

Message	Explanation
Failed to add new timer of certified device list ["<Name>"].	The timer could not be added to the database because of a database error. The operation should be retried.
Failed to update timer of certified device list [<Name>]	The timer could not be updated in the database because of a database error. The operation should be retried.
Failed to delete timer of certified device list [<Name>]	The timer could not be deleted from the database because of a database error. The operation should be retried.
Parsing error for certified device timer [<Name>] start time [<time>].	This error appears when there is an error in the date/time format of start time of the timer.
(API <Name>), Failed!	When an API call fails because of an input error or runtime error, this message appears. The error message is appended to this.

Table 18 Admin Authentication Manager 

Message	Explanation
Invalid minimum length for Admin Password, Setting it to DEFAULT VALUE, 8	This message appears when Admin password length is not between 8 and 48 characters.
Invalid Admin user. Admin user login failed	This message appears when there is no such Admin user.
Invalid Admin user session. Admin user login failed	This message appears when there is no session for this Admin user. This may happen because of session timeout. The Admin should login again.

Table 19 VLAN Map Info Manager 

Message	Explanation
VLAN <id>/<id> conflicts with other VLAN mapping entry	This message appears when there is a conflict between the existing VLAN mappings and the new VLAN mapping. The operation should be retried with non-conflicting VLAN mapping.
VLAN <id>/<id> could not be added (Database error)	This message appears when there is a database error while saving a VLAN mapping. The operation should be retried.
VLAN <id>/<id> could not be added (Publish error)	This message appears when there is an error publishing the VLAN mapping to Clean Access Server. The operation should be retried.

Table 20 Rogue AP Report Manager 

Message	Explanation
Invalid rogue AP report	This message appears when there is an error while adding the report. The operation should be retried.
Failed to add rogue AP report	This message appears when there is a database error while adding the report. The operation should be retried.
Failed to remove all rogue AP reports	This message appears when there is an error while removing all the reports. The operation should be retried.
Invalid user, rogue AP reports submission failed	This message appears when there is an error in user record while adding report.

Table 21 MAC Info Manager 

Message	Explanation
<MACAddress> is already in the local MAC list	MAC list exists.
<MACAddress> is already in the global MAC list	MAC list exists as part of global list.
Could not be updated to the MAC list (Database error)	Unable to save the MAC list to the Database.
Could not be updated to the MAC list	Unable to apply the MAC list changes to Clean Access Server.
Could not be removed from the MAC list (Database error)	Unable to delete the MAC list from the Database.
Could not be removed from the MAC list	Unable to remove the MAC list from the Clean Access Server.

Table 22 Switch Notification Task 

Message	Explanation
Failed to remove out-of-band user <user>.	This messages is shown when a link down is observed and respective out-of-band user deletion failed.
SNMP trap is received from WLC [<IPAddress>] which is NOT in our database.	SNMP trap is received from a WLC with mentioned IP Address that is not added to the devices.
SNMP trap is received from WLC [<IPAddress>] which is DISABLED in our database.	SNMP trap is received from a WLC, with mentioned IP Address, which is disabled due to reasons like too many consecutive write failures.
Failed to setup SNMP trap, <message>	Failed to setup SNMP trap.

Table 23 User Account Manager 

Message	Explanation
Invalid user account. User account setup failed	User account trying to setup is invalid.
<user> user account does not exist, invalid user	User account trying to modify is invalid.
<user> user account update failed	User account modification failed in Database.
Invalid user account	User account trying to delete is invalid.
<user> user account deletion failed	Failed to purge user account from Database.
All user accounts deletion failed	Failed to purge all user accounts from Database.

Table 24 Guest Registration Page Manager 

Message	Explanation
<Name> page property could not be saved	While adding a guest page property to the guest_page_prop table, if there is either an exception while executing the SQL statement or the update count after executing the SQL statement is not 1, this error message is written.
<Name> page property could not be removed	There is an error while removing the guest page property with a specific name from the database table guest_page_prop.
<Name> page property could not be updated	There is an error while updating the value of a guest page property with a specific name from the database table guest_page_prop.
<label> guest registration property could not be saved	While adding the guest registration info to the guest_registration_info table, if there is either an exception while executing the SQL statement or the update count after executing the SQL statement is not 1, this error message is written.
<label> guest registration property could not be updated	There is an error while updating the guest registration information with a particular label from the guest_registration_info table.
<label> guest registration property could not be removed	There is an error while removing the guest registration information with a particular label from the guest_registration_info table.
Unable to get guest page	There is an error while collecting all the guest page properties (guest_page_prop) and guest registration info (guest_registration_info).
Unable to convert guest page info to XML	After collecting the Guest information (guest page properties and registration info) there is problem converting to an XML document.
Unable to broadcast registration page	There is an error while writing the XML doc representing the guest information to a byte array output stream.
Unable to publish registration page to <IPAddress>	There is an error while publishing the guest registration page info to a Clean Access Server.
Unable to publish guest page (no secure Clean Access Server)	<Update written using - EventLog.INFORMATION_CODE>.
Unable to broadcast registration page	There is an error while collecting all the guest page properties (guest_page_prop) and guest registration info (guest_registration_info).

Table 25 Cisco API Filter 

Message	Explanation
Request is missing some security credential (API). Requested URI, <data>	The Admin information passed while using the API was incorrect, (Admin account name / password) or no Admin user information was found for the session in which the request was received.
No registration request	There was no value for the attribute "CASRequest" when the request is received by the GuestsServlet.
Registering <loginid> failed (no guest provider)	There is no Guest auth server defined for registering the guest.
Registering <loginid> failed (login ID already used)	Attempting to register a guest whose login ID is already being used.
Registering <loginid> failed ("message")	A runtime exception or a guest exception is encountered while registering a guest.

Table 26 Security Page Manager 

Message	Explanation
<OS>, <UAKey> could not be removed from the Security Page list (Database error)	Failed to purge security page information from Database.
<OS>, <UAKey> could not be added to the Security Page list (Database error)	Failed to add security page information to Database.
NULL FloatingMACInfo	Floating MAC trying to add is NULL.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2011 Cisco Systems, Inc. All rights reserved.