1Short-term refers to a period of not more than 96 consecutive hours and a total of no more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.).
2Operating temperature specifications for the router will differ from those listed in this table when 40-port Gigabit Ethernet line cards using GLC-GE-100FX SFP transceiver modules are installed in the router. This is due to the lower temperature specifications of the SFP module. Please contact a Cisco representative for more information.
3G is a value of acceleration, where 1G equals 32.17 ft/sec2 (9.81 m/sec2).
4Grms is the root mean square value of acceleration.
Table A-2 lists the power consumption specifications for the RSP card, line cards, and fan tray.
Caution Be sure that the chassis configuration complies with the required power budgets. Failure to properly verify the configuration may result in an unpredictable state if one of the power units fails. Contact your local sales representative for assistance.
Table A-2 Card and Fan Tray Power Consumption Specifications