Cisco ASR 9000 Series Aggregation Services Router ISM Line Card Installation Guide
Preface
Downloads: This chapterpdf (PDF - 190.0KB) The complete bookPDF (PDF - 3.29MB) | Feedback

Table of Contents

Preface

Changes to This Document

Audience

Purpose

Document Organization

Document Conventions

Obtaining Documentation and Submitting a Service Request

Changes to This Document

 

Table 1 Changes to This Document

Revision
Date
Change Summary

OL-24905-02

May 2012

Describes the ISM single hardware PID solution introduced in Cisco IOS XR Software Release 4.2.1. Previously, you installed the appropriate services applications manually. With the ISM single hardware PID solution, an IOS XR CLI command is used to select which service application to run (e.g. CGN).

OL-24905-01

April 2011

Initial release of this document.

Audience

The Cisco ASR 9000 Aggregation Services Router ISM Line Card Installation Guide is written for hardware installers and system administrators of Cisco routers.

This publication assumes that the user has a substantial background in installing and configuring router and switch-based hardware. The reader should also be familiar with electronic circuitry and wiring practices, and have experience as an electronic or electromechanical technician.

Purpose

This installation guide contains procedures for installing line cards into the router, verifying the installation, and creating a basic startup configuration file.

Document Organization

This installation and configuration guide is organized into the following chapters and appendixes:

Document Conventions

This publication uses the following conventions:

  • Ctrl represents the key labeled Control . For example, the key combination Ctrl- Z means hold down the Control key while you press the Z key.

Command descriptions use these conventions:

  • Examples that contain system prompts denote interactive sessions, indicating the commands that you should enter at the prompt. For example:

RP/0/RSP0/CPU0:router#

  • Commands and keywords are in bold font.
  • Arguments for which you supply values are in italic font.
  • Elements in square brackets ([ ]) are optional.
  • Alternative but required keywords are grouped in braces ({ }) and separated by vertical bars (|).

Caution Means be careful. You are capable of doing something that might result in equipment damage or loss of data.


Note Means take note. Notes contain helpful suggestions or references to materials not contained in this manual.



Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.



Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device. Statement 1071


Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation , which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.