Table Of Contents

Connectors and Cabling

Ethernet Port - 100 Mbit/s

Alarm Port

Craft Port - Craft Mode

Craft Port - Factory Mode

RJ45 120 - SCN

Connectors and Cabling

---

Ethernet Port - 100 Mbit/s

Connector	RJ45
Pin 1	TxD+
Pin 2	TxD-
Pin 3	RxD+
Pin 6	RxD

Alarm Port

Connector	Weidmüller BL5.08 Orange 3 way connector with terminal screws
Pin 1	Normally Open (NO) (left pin when looking at the rear panel)
Pin 2	Common
Pin 3	Normally Closed (NC)
Maximum voltage/current	60V at 500mA over the operating ambient temperature range

Craft Port - Craft Mode

V.24/V.28 (RS232)
Connector	9 pin, female sub-miniature D connector
Pin 2	TxD
Pin 3	RxD
Pin 5	GND
Modem Control	None
Flow Control	None
Speed	9600 bit/s
Characteristic:	8 bits, no parity, asynchronous, 1 stop bit
Configuration	Interactive ASCII menu text interface
Management Protocol	Structured ASCII command/response interface

Craft Port - Factory Mode

V.24/V.28 (RS232)
Connector	9 pin, female sub-miniature D connector
Pin 2	TxD
Pin 3	RxD
Pin 5	GND
Modem Control	None
Flow Control	XON/XOFF
Speed	38400 bit/s
Characteristics	8 bits, no parity, asynchronous, 1 stop bit
Configuration	Interactive ASCII menu text interface
Management Protocol	Structured ASCII command/response interface

RJ45 120 - SCN

---

Note Use screened cables.

---

Connector	RJ45
Pin 1	TxD
Pin 2	TxD
Pin 4	RxD
Pin 5	RxD