Feedback
|
Table Of Contents
Release Notes for Cisco ONS 15310-CL
Release 9.0New Features and Functionality
New Software Features and Functionality
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco ONS 15310-CL
Release 9.0
Revised: October 2008, OL-15505-01Release notes contain the new features and enhancements for the Cisco ONS 15310-CL. For detailed information regarding features, capabilities, hardware, and software introduced with this release, refer to Release 9.0 of the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide, Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Guide, and Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide and Release 9.0 of the Cisco ONS SONET TL1 Command Guide. For the latest version of the Release Notes for Cisco ONS 15310-CL Release 9.0, visit the following URL:
http://www.cisco.com/en/US/products/hw/optical/ps2001/prod_release_notes_list.html
Cisco also provides Bug Toolkit, a web resource for tracking defects. To access Bug Toolkit, visit the following URL:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
Contents
•
New Features and Functionality
•
Obtaining Documentation and Submitting a Service Request
Changes to the Release Notes
This section documents supplemental changes that have been added to the Release Notes for Cisco ONS 15310-CL Release 9.0 since the production of the Cisco ONS 15310-CL System Software CD for Release 9.0.
Using the Bug ToolKit
In Cisco ONS 15310-CL Software Release 9.0 and later, use the Bug ToolKit to view the list of outstanding and resolved bugs in a release. This section explains how to use the Bug ToolKit.
Step 1
Go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs and click Launch Bug Toolkit.
You will be prompted to log into Cisco.com.
Step 2
To search for a specific bug, enter the bug ID in the Search for Bug ID field and click Go.
To search for all the bugs in a specified release, enter the following search criteria:
•
Select the Product Category—Select Optical Networking.
•
Select Products—Select the products from the list. Press and hold the Ctrl key to select multiple products.
•
Software Version—Select 9.0 to view the list of outstanding and resolved bugs in Cisco ONS 15310-CL Software Release 9.0.
•
Advanced Options—You can either perform a search using the default search criteria or define custom criteria for an advanced search. To customize the advanced search, select Use custom settings for severity, status, and others and provide the following information:
–
Severity—Select the severity level.
–
Status—Select Open, Fixed, or Terminated.
Select Open to view all the open bugs. To filter the open bugs, clear the Open check box and select the appropriate suboptions that appear below the Open check box. The suboptions are New, Held, More, Open, Waiting, Assigned, Forwarded, Postponed, Submitted, and Information Required. For example, if you want to view only new bugs in Cisco ONS 15310-CL Software Release 9.0, only select New.
To view fixed bugs, select Fixed. To filter fixed bugs, clear the Fixed check box and select the appropriate suboptions that appear below the fixed check box. The suboptions are Resolved or Verified.
To view terminated bugs, select Terminated. To filter fixed bugs, clear the Terminated check box and select the appropriate suboptions that appear below the terminated check box. The suboptions are Closed, Junked, and Unreproducible. Select select multiple options as required.
–
Advanced—Select the Show only bugs containing bug details check box to view only those bugs that contain detailed information, such as symptoms and workarounds.
–
Modified Date—Select this option if you want filter bugs based on the date on which the bugs were last modified.
–
Results Displayed Per Page—Select the appropriate option from the list to restrict the number of results that appear per page.
Step 3
Click Search.
The Bug Toolkit displays the list of bugs based on the specified search criteria. You can filter the search results based on severity, status and/or technology.
New Features and FunctionalityThis section highlights new features and functionality for Release 9.0. For detailed documentation of each of these features, consult the user documentation.
New Software Features and Functionality
The following new software features are added for Release 9.0:
Qualification of Pluggables
This enhancement qualifies additional pluggables on already released ONG boards across different platform. The pluggables that are newly supported on ONS 15310-CL are:
•
ONS-SC-155-1470 TO ONS-SC-155-1610
•
ONS-SE-622-1470 TO ONS-SC-622-1610
Login Warning Message Window
In Software Release 8.5 and earlier, the warning text in the CTC login screen is not displayed automatically. The user has to slide the vertical slider bar to see the warning text. A new warning message window has been added to display the warning message when you log into CTC.
Counter for Discarded Frames
In earlier releases, on enabling Flow Control, the discarded frames were counted by the PM ifInDiscards. However, on disabling Flow Control, the ifInDiscards did not count discarded frames.
This enhancement ensures that the PM ifInDiscards counts discarded frames regardless of whether Flow Control is enabled or disabled.
Counter for PAUSE Frames
This enhancement adds counters for received and transmitted pause frame for CE-MR-10 and CE-MR-6 cards.
IPv6 Native Support
Cisco ONS 15310-CL Software R9.0 and later supports native IPv6. ONS 15310-CL can be managed over IPv6 DCN networks by enabling the IPv6 feature. After you enable IPv6 in addition to IPv4, you can use CTC, TL1, and SNMP over an IPv6 DCN to manage ONS 15310-CL. Each NE can be assigned an IPv6 address in addition to the IPv4 address. You can access the NE by entering the IPv4 address, an IPv6 address or the DNS name of the device. The IPv6 address is assigned only on the LAN interface of the NE. DCC/GCC interfaces use the IPv4 address.
SNMPv3 Support
Cisco ONS 15310-CL Software R9.0 and later supports SNMPv3 in addition to SNMPv1 and SNMPv2c. SNMPv3 is an interoperable standards-based protocol for network management. SNMPv3 provides secure access to devices by a combination of authentication and encryption of packets over the network based on the User Based Security Model(USM) and the View-based Access Control Model (VACM).
•
User Based Security Model—The User based Security Model (USM) uses the HMAC algorithm for generating keys for authentication and privacy. SNMPv3 authenticates data based on its origin, and ensures that the data is received intact. SNMPv1 and v2 authenticate data based on the plain text community string which is less secure when compared to user based authentication model.
•
View-based Access Control Model—The view-based access control model controls the access to the managed objects.
You can configure SNMPv3 on a node to allow SNMP get and set access to management information and configure a node to send SNMPv3 traps to trap destinations in a secure way. SNMPv3 can be configured in secure mode, non-secure mode, or disabled mode.
Overlay Ring Circuits
An overlay ring configuration consists of a core ring and subtended rings (Figure 12-36). An Overlay Ring Circuit routes traffic around multiple rings in an overlay ring configuration, passing through one or more nodes more than once. This results in multiple cross-connections on the nodes connecting the core ring to the subtended rings. For example, a customer having a core ring with cross-connects provisioned using TL1 can create create cross-connects on subtended rings, due to a business need, without having to hamper the existing cross-connects on the core ring. This circuit can be either protected or unprotected.
Overlay ring supports circuit sizes; STS-1, 3c, 6c, 9c, 12c, 24c, 36c, 48c, and 192cs. Both unidirectional and bidirectional circuits are supported. Overlay ring circuits are contiguous concatenated (CCAT) and not virtual concatenated (VCAT) circuits.
Manual routing is mandatory while provisioning the overlay ring circuit. Overlay ring circuits created using Transaction Language 1 (TL1) are discovered by CTC and the status "DISCOVERED" is displayed. If the overlay ring circuit is deleted, the cross-connects on the core ring and subtended rings get deleted. Cross-connects on a subtended ring can be deleted through TL1 but would reflect as a partial overlay ring circuit in CTC, i.e. core ring will continue having cross-connects.
TL1
TL1 Command Changes
New Commands
The following new TL1 commands are added:
•
CHG-ACCMD-STS96C
•
CONN-TACC-STS96C
•
DLT-BWP-ETH
•
DLT-CRS-ETH
•
DLT-CRS-STS96C
•
DLT-FFP-OCH
•
DLT-ROLL-STS96C
•
ED-BWP-ETH
•
ED-CRS-ETH
•
ED-CRS-STS96C
•
ED-FFP-OTS
•
ED-MCAST
•
ED-ROLL-STS96C
•
ED-STS96C
•
ED-VLAN-ETH
•
ENT-BWP-ETH
•
ENT-CRS-ETH
•
ENT-CRS-STS96C
•
ENT-FFP-OCH
•
ENT-ROLL-STS96C
•
INIT-REG-STS96C
•
OPR-LPBK-STS96C
•
OPR-PROTNSW-OTS
•
OPR-PROTNSW-STS96C
•
OPR-RAMAN
•
RLS-LPBK-STS96C
•
RLS-PROTNSW-OTS
•
RLS-PROTNSW-STS96C
•
RMV-STS96C
•
RST-STS96C
•
RTRV-ALM-STS96C
•
RTRV-BWP-ETH
•
RTRV-COND-STS96C
•
RTRV-CRS-ETH
•
RTRV-CRS-STS96C
•
RTRV-FFP-OTS
•
RTRV-MCAST
•
RTRV-NE-APC
•
RTRV-NE-WDMANS
•
RTRV-PATH-OCH
•
RTRV-PM-STS96C
•
RTRV-PMMODE-STS96C
•
RTRV-PMMODE-VC12
•
RTRV-PMMODE-VC3
•
RTRV-PMSCHED-STS96C
•
RTRV-PROTNSW-OTS
•
RTRV-PROTNSW-STS96C
•
RTRV-PTHTRC-STS96C
•
RTRV-RAMAN
•
RTRV-ROLL-STS96C
•
RTRV-STS96C
•
RTRV-TARPPARAM
•
RTRV-TH-STS96C
•
RTRV-VLAN-ETH
•
SCHED-PMREPT-STS96C
•
SET-PMMODE-STS96C
•
SET-PMMODE-VC12
•
SET-PMMODE-VC3
•
SET-TH-STS96C
In Software Release 9.0, the following OSI TL1 commands are not supported:
•
DLT-MAT
•
DLT-ROUTEROSI
•
ED-LAPD
•
ED-MAT
•
ED-ROUTEROSI
•
ED-TARPPARAM
•
RTRV-LAPD
•
RTRV-MAT
•
RTRV-OSIRIB
•
RTRV-ROUTEROSI
Changed Commands
The following new TL1 commands are changed:
•
ED-NE-GEN
•
RTRV-NE-GEN
•
RTRV-NE-IPMAP
•
RTRV-MAP-NETWORK
•
RTRV-TADRMAP
•
COPY-IOSCFG
•
COPY-RFILE
•
ENT-TRAPTABLE
•
ED-TRAPTABLE
•
DLT-TRAPTABLE
•
RTRV-TRAPTABLE
•
ENT-FTPSERVER
•
ED-FTPSERVER
•
DLT-FTPSERVER
•
RTRV-FTPSERVER
Command Syntax Changes
The syntax of the following commands have changed:
•
ED-10GFC syntax changed from:
ED-10GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-10GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]];
•
ED-1GFC syntax changed:
ED-1GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-1GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]];
•
ED-1GFICON syntax changed:
ED-1GFICON[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-1GFICON[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]];
•
ED-2GFC syntax changed:
ED-2GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-2GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]];
•
ED-2GFICON syntax changed:
ED-2GFICON[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-2GFICON[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]];
•
ED-4GFC syntax changed:
ED-4GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-4GFC[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]
•
ED-4GFICON syntax changed:
ED-4GFICON[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[MFS=<maxfrmsize>],[NAME=<name>], [CMDMDE=<cmdmde>],[SOAK=<soak>],[FREQ=<freq>],[LOSSB=<lossb>], [SQUELCH=<squelch>][:<pst>[,<sst>]];
To:
ED-4GFICON[:<TID>]:<aid>:<CTAG>[:::LINKRCVRY=<linkrcvry>],[DISTEXTN= <distance_extension>],[AUTODETECTION=<auto_detection>], [LINKCREDITS=<credits>],[FASTSWITCH=<fastswitch>],[MFS= <maxfrmsize>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>], [FREQ=<freq>],[LOSSB=<lossb>],[SQUELCH=<squelch>][:<pst>[, <sst>]];
•
ED-APC syntax changed:
ED-APC[:<TID>]:<aid>:<CTAG>[:::APCENABLE=<apcenable>][:];
To:
ED-APC[:<TID>]:<aid>:<CTAG>[::<role>][:APCENABLE=<apcenable>][:];
•
ED-CRS-STS1 syntax changed:
ED-CRS-STS1[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS1[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS12C syntax changed:
ED-CRS-STS12C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS12C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS18C syntax changed:
ED-CRS-STS18C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To: ED-CRS-STS18C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS192C syntax changed:
ED-CRS-STS192C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS192C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS24C syntax changed:
ED-CRS-STS24C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS24C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS36C syntax changed:
ED-CRS-STS36C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS36C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS3C syntax changed:
ED-CRS-STS3C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS3C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS48C syntax changed:
ED-CRS-STS48C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To
ED-CRS-STS48C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS6C syntax changed:
ED-CRS-STS6C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS6C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-STS9C syntax changed:
ED-CRS-STS9C[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-STS9C[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-VC3 syntax changed:
ED-CRS-VC3[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-VC3[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-CRS-VT1 syntax changed:
ED-CRS-VT1[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-VT1[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]
];
•
ED-CRS-VT2 syntax changed:
ED-CRS-VT2[:<TID>]:<src>,<dst>:<CTAG>[:::ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-CRS-VT2[:<TID>]:<src>,<dst>:<CTAG>[::<cct>][:ADD=<add>],[REMOVE=<remove>],[CKTID=<cktid>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
•
ED-E3 syntax changed:
ED-E3[:<TID>]:<aid>:<CTAG>[:::TACC=<tacc>],[TAPTYPE=<taptype>],[SFBER=<sfber>],[SDBER=<sdber>],[SOAK=<soak>],[NAME=<name>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];
To:
ED-E3[:<TID>]:<aid>:<CTAG>[:::TACC=<tacc>],[TAPTYPE=<taptype>],[SFBER=<sfber>],[SDBER=<sdber>],[SOAK=<soak>],[NAME=<name>],[CMDMDE=<cmdmde>],[AISONLPBK=<aisonlpbk>][:<pst>[,<sst>]];
•
ED-ETH syntax changed:
ED-ETH[:<TID>]:<src>:<CTAG>[:::FLOW=<flow>],[EXPDUPLEX=<expduplex>],[SELECTIVEAUTO=<selectiveauto>],[EXPSPEED=<expspeed>],[VLANCOS=<vlancosthreshold>],[IPTOS=<iptosthreshold>],[NAME=<name>],[CMDMDE=<cmdmde>],[SOAK=<soak>],[LITIMER=<litimer>][:<pst>[,<sst>]];
To:
ED-ETH[:<TID>]:<src>:<CTAG>[:::FLOW=<flow>],[EXPDUPLEX=<expduplex>],[SELECTIVEAUTO=<selectiveauto>],[EXPSPEED=<expspeed>],[VLANCOS=<vlancosthreshold>],[IPTOS=<iptosthreshold>],[NAME=<name>],[CMDMDE=<cmdmde>],[SUPPRESS=<suppress>],[SOAK=<soak>],[LITIMER=<litimer>][:<pst>[,<sst>]];
•
ED-L2-ETH syntax changed:
ED-L2-ETH[:<TID>]:<aid>:<CTAG>[:::NIMODE=<nimode>],[MACLEARNING=<maclearning>],[INGRESSCOS=<ingresscos>],[ETHERCETYPE=<ether_ce_type>],[ETHERSTYPE=<ether_s_type>],[ALWMACADDR=<alw_mac_addr>],[INHMACADDR=<inh_mac_addr>],[BPDU=<bpdu>],[BRIDGESTATE=<bridge_state>],[QNQMODE=<qnqmode>],[TRNSPSVLAN=<trnsp_svlan>],[NAME=<name>][:];
To:
ED-L2-ETH[:<TID>]:<aid>:<CTAG>[:::NIMODE=<nimode>],[MACLEARNING=<maclearning>],[INGRESSCOS=<ingresscos>],[ETHERCETYPE=<ether_ce_type>],[ETHERSTYPE=<ether_s_type>],[ALWMACADDR=<alw_mac_addr>],[INHMACADDR=<inh_mac_addr>],[BPDU=<bpdu>],[BRIDGESTATE=<bridge_state>],[QNQMODE=<qnqmode>],[TRNSPSVLAN=<trnsp_svlan>],[NAME=<name>],[IGMPROUTER=<igmprouter>],[AISACTION=<aisaction>],[PROTACTION=<protaction>][:];
•
ED-NE-GEN syntax changed:
ED-NE-GEN[:<TID>]::<CTAG>[:::NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<defrtr>],[IIOPPORT=<iiopport>],[NTP=<ntp>],[SUPPRESSIP=<mode>],[MODE=<mode>],[SERIALPORTECHO=<serialportecho>];
To:
ED-NE-GEN[:<TID>]::<CTAG>[:::NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<defrtr>],[IPV6ADDR=<ipv6addr>],[IPV6PREFLEN=<ipv6preflen>],[IPV6DEFRTR=<ipv6defrtr>],[IPV6ENABLE=<ipv6enable>],[IIOPPORT=<iiopport>],[NTP=<ntp>],[SUPPRESSIP=<suppressip>],[MODE=<mode>],[SERIALPORTECHO=<serialportecho>],[OSIROUTINGMODE=<osiroutingmode>],[OSIL1BUFSIZE=<osil1bufsize>],[OSIL2BUFSIZE=<osil2bufsize>];
•
ED-OC12 syntax changed:
ED-OC12[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];
To:
ED-OC12[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=<osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];
•
ED-OC192 syntax changed:
ED-OC192[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];
To:
ED-OC192[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=<osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];
•
ED-OC3 syntax changed:
ED-OC3[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];
To:
ED-OC3[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=<osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];
•
ED-OC48 syntax changed:
ED-OC48[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>][:<pst>[,<sst>]];
To:
ED-OC48[:<TID>]:<aid>:<CTAG>[:::DCC=<dcc>],[AREA=<area>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[PJMON=<pjmon>],[SFBER=<sfber>],[SDBER=<sdber>],[MODE=<mode>],[SOAK=<soak>],[OSPF=<ospf>],[LDCC=<ldcc>],[NAME=<name>],[CMDMDE=<cmdmde>],[EXPTRC=<exptrc>],[TRC=<trc>],[TRCMODE=<trcmode>],[TRCFORMAT=<trcformat>],[ADMSSM=<admssm>],[SENDDUSFF=<senddusff>],[AISONLPBK=<aisonlpbk>],[FOREIGNFEND=<foreignFarEnd>],[FOREIGNIP=<foreignIpAddress>],[FREQ=<freq>],[LOSSB=<lossb>],[OPRNOMINAL=<oprnominal>],[OSISDCC=< osisdcc>],[OSILDCC=<osildcc>],[OSIROUTER=<osirouter>][:<pst>[,<sst>]];
•
ED-QNQ-ETH syntax changed:
ED-QNQ-ETH[:<TID>]:<aid>:<CTAG>::<firstcevlanid>,<lastcevlanid>,<s_vlan_id>[:RULE=<rule>][:];
To:
ED-QNQ-ETH[:<TID>]:<aid>:<CTAG>::<firstcevlanid>,<lastcevlanid>,<s_vlan_id>[:RULE=<rule>],[INTERNALVLAN=<internal_vlan_id>],[INGRESSCOS=<ingresscos>][:];
•
ED-SLV-WDMANS syntax changed:
ED-SLV-WDMANS[:<TID>]:<aid>:<CTAG>[:::HIGHSLVEXP=<highslvexp>],[LOWSLVEXP=<lowslvexp>][:];
To:
ED-SLV-WDMANS[:<TID>]:<aid>:<CTAG>[::<role>][:HIGHSLVEXP=<highslvexp>],[LOWSLVEXP=<lowslvexp>][:];
•
ED-T1 syntax changed:
ED-T1[:<TID>]:<aid>:<CTAG>[:::LINECDE=<linecde>],[FMT=<fmt>],[LBO=<lbo>],[TACC=<tacc>],[TAPTYPE=<taptype>],[SOAK=<soak>],[SFBER=<sfber>],[SDBER=<sdber>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[NAME=<name>],[CMDMDE=<cmdmde>],[AISONLPBK=<aisonlpbk>],[MODE=<mode>],[SYNCMAP=<syncmap>],[ADMSSM=<admssm>],[VTMAP=<vtmap>],[AISVONAIS=<aisvonais>],[AISONLOF=<aisonlof>],[INHFELPBK=<inhfelpbk>],[BERTMODE=<bertmode>],[BERTPATTERN=<bertpattern>],[BERTERRCOUNT=<berterrcount>][:<pst>[,<sst>]];
To:
ED-T1[:<TID>]:<aid>:<CTAG>[:::LINECDE=<linecde>],[FMT=<fmt>],[LBO=<lbo>],[TACC=<tacc>],[TAPTYPE=<taptype>],[SOAK=<soak>],[SFBER=<sfber>],[SDBER=<sdber>],[SYNCMSG=<syncmsg>],[SENDDUS=<senddus>],[NAME=<name>],[CMDMDE=<cmdmde>],[AISONLPBK=<aisonlpbk>],[MODE=<mode>],[SYNCMAP=<syncmap>],[ADMSSM=<admssm>],[VTMAP=<vtmap>],[AISVONAIS=<aisvonais>],[AISONLOF=<aisonlof>],[INHFELPBK=<inhfelpbk>],[INHFEBPLPBK=<inhfebplpbk>],[BERTMODE=<bertmode>],[BERTPATTERN=<bertpattern>],[BERTERRCOUNT=<berterrcount>][:<pst>[,<sst>]];
•
ED-VLAN syntax changed:
ED-VLAN[:<TID>]:<aid>:<CTAG>[:::NAME=<name>],[PROTN=<protn>][:];
To:
ED-VLAN[:<TID>]:<aid>:<CTAG>[:::NAME=<name>],[PROTN=<protn>],[MACLEARNING=<maclearning>],[IGMPENABLE=<igmpenable>],[IGMPFASTLEAVE=<igmpfastleave>],[IGMPSUPP=<igmpsupp>][:];
•
ED-WDMANS syntax changed:
ED-WDMANS[:<TID>]:<aid>:<CTAG>[:::POWERIN=<powerIn>],[POWEROUT=<powerOut>],[POWEREXP=<powerExp>],[POWEROSC=<powerOSC>],[NTWTYPE=<ringType>],[PPMESH=<ppmesh>],[DITHER=<dither>];
To:
ED-WDMANS[:<TID>]:<aid>:<CTAG>[::<role>][:POWERIN=<powerIn>],[POWEROUT=<powerOut>],[POWEREXP=<powerExp>],[POWEROSC=<powerOSC>],[NTWTYPE=<ringType>],[PPMESH=<ppmesh>],[DITHER=<dither>];
•
ENT-FTPSERVER syntax changed:
ENT-FTPSERVER[:<TID>]::<CTAG>:::IPADDR=<IPADDR>,IPMASK=<IPMASK>,ENABLE=<ENABLE>,[TIMER=<TIMER>];
To:
ENT-FTPSERVER[:<TID>]::<CTAG>:::IPADDR=<IPADDR>,[IPMASK=<IPMASK>],ENABLE=<ENABLE>,[TIMER=<TIMER>];
•
ENT-QNQ-ETH syntax changed:
ENT-QNQ-ETH[:<TID>]:<aid>:<CTAG>::<firstcevlanid>,<lastcevlanid>,<s_vlan_id>[:RULE=<rule>][:];
To:
ENT-QNQ-ETH[:<TID>]:<aid>:<CTAG>::<firstcevlanid>,<lastcevlanid>,<s_vlan_id>[:RULE=<rule>],[INTERNALVLAN=<internal_vlan_id>],[INGRESSCOS=<ingresscos>][:];
•
ENT-VLAN syntax changed:
ENT-VLAN[:<TID>]:<aid>:<CTAG>[:::NAME=<name>],[PROTN=<protn>][:];
To:
ENT-VLAN[:<TID>]:<aid>:<CTAG>:::NAME=<name>,[PROTN=<protn>],[MACLEARNING=<maclearning>],[IGMPENABLE=<igmpenable>],[IGMPFASTLE
AVE=<igmpfastleave>],[IGMPSUPP=<igmpsupp>][:];
•
OPR-APC syntax changed:
OPR-APC[:<TID>]:<aid>:<CTAG>;
To:
OPR-APC[:<TID>]:<aid>:<CTAG>[::<role>];
•
OPR-SLV-WDMANS syntax changed:
OPR-SLV-WDMANS[:<TID>]:<aid>:<CTAG>;
To:
OPR-SLV-WDMANS[:<TID>]:<aid>:<CTAG>[::<role>];
Command Response Changes
The following TL1 command responses have changed:
•
RTRV-ALM-BITS response changes:
<aid>,[<condtype>]:<condeff>,,,[<locn>],[<dirn>],,:,
To:
<aid>,[<aidtype>]:<ntfcncde>,<condtype>,<srveff>,[<ocrdat>],[<ocrtm>],[<location>],[<direction>]:[<desc>],
•
RTRV-ALS response changes:
<slot>,[<rslt>]:[<diagtype>],[<peer>],[<aid>],[<aidtype>]
To:
:[<TID>]:<aid>:<CTAG>[::::]
> rtrv-apc::all:1
•
RTRV-ETH response changes:
<aid>::[<adminstate>],[<linkstate>],[<mtu>],[<flowctrl>],[<optics>],[<duplex>],[<speed>],[<flow>],[<expduplex>],[<expspeed>],[<vlancosthreshold>],[<iptosthreshold>],[<name>],[<soak>],[<soakleft>],[<selectiveauto>],[<litimer>]:<pst>,[<sst>]
To:
<aid>::[<adminstate>],[<linkstate>],[<mtu>],[<flowctrl>],[<optics>],[<duplex>],[<speed>],[<flow>],[<expduplex>],[<expspeed>],[<vlancosthreshold>],[<iptosthreshold>],[<name>],[<suppress>],[<soak>],[<soakleft>],[<selectiveauto>],[<litimer>]:<pst>,[<sst>]
•
RTRV-NE-GEN response changes:
[<ipaddr>],[<ipmask>],[<defrtr>],[<iiopport>],[<ntp>],[<name>],[<swver>],[<load>],[<protswver>],[<protload>],[<defdesc>],[<platform>],[<secumode>],[<suppressip>],[<mode>],[<autopm>],[<serialportecho>]
To:
[<ipaddr>],[<ipmask>],[<defrtr>],[<ipv6addr>],[<ipv6preflen>],[<ipv6defrtr>],[<ipv6enable>],[<iiopport>],[<ntp>],[<name>],[<swver>],[<load>],[<protswver>],[<protload>],[<defdesc>],[<platform>],[<secumode>],[<suppressip>],[<mode>],[<autopm>],[<serialportecho>],[<osiroutingmode>],[<osil1bufsize>],[<osil2bufsize>]
•
RTRV-QNQ-ETH response changes:
<aid>:<cevlanid>,<svlanid>:<rule>:
To:
<aid>:<cevlanid>,<svlanid>:<rule>,[<internalvlan>],[<ingresscos>]:
•
RTRV-T1 response changes:
<aid>::[<linecde>],[<fmt>],[<lbo>],[<tacc>],[<taptype>],[<soak>],[<soakleft>],[<sfber>],[<sdber>],[<name>],[<syncmsg>],[<senddus>],[<retime>],[<aisonlpbk>],[<aisvonais>],[<aisonlof>],[<mode>],[<syncmap>],[<admssm>],[<providesync>],[<vtmap>],[<inhfelpbk>],[<bertmode>],[<bertpattern>],[<berterrcount>],[<berterrrate>]:<bertsyncstatus>,[<pst>]
<aid>::[<linecde>],[<fmt>],[<lbo>],[<tacc>],[<taptype>],[<soak>],[<soakleft>],[<sfber>],[<sdber>],[<name>],[<syncmsg>],[<senddus>],[<retime>],[<aisonlpbk>],[<aisvonais>],[<aisonlof>],[<mode>],[<syncmap>],[<admssm>],[<providesync>],[<vtmap>],[<inhfelpbk>],[<inhfebplpbk>],[<bertmode>],[<bertpattern>],[<berterrcount>],[<berterrrate>]:<bertsyncstatus>,[<pst>]
•
RTRV-WDMANS response changes:
<aid>::[<powerIn>],[<powerInFlg>],[<powerOut>],[<powerOutFlg>],[<powerExp>],[<powerExpFlg>],[<powerOsc>],[<powerOscFlg>],[<ringType>],[<opticalNodeType>],[<nepLaunch>],[<fepLaunch>],[<ppmesh>],[<dither>],[<lastrundat>],[<lastruntm>],[<lastcalcdat>]:[<lastcalctm>]
To:
<aid>:[<role>]:[<powerIn>],[<powerInFlg>],[<powerOut>],[<powerOutFlg>],[<powerExp>],[<powerExpFlg>],[<powerOsc>],[<powerOscFlg>],[<ringType>],[<opticalNodeType>],[<nepLaunch>],[<fepLaunch>],[<ppmesh>],[<dither>],[<lastrundat>],[<lastruntm>],[<lastcalcdat>]:[<lastcalctm>]
TL1 ENUM Changes
CARDMODE
The following CARDMODE enum items are added:
•
CARDMODE_MLMR_AUTO => "MLMR-AUTO"
•
CARDMODE_MLMR_MANUAL => "MLMR-MANUAL"
CARDMODE is used in the following commands:
•
ED-EQPT
•
ENT-EQPT
•
RTRV-EQPT
EQUIPMENT_TYPE
The following EQUIPMENT_TYPE enum items are added:
•
EQUIPMENT_TYPE_ET_OPT_RAMP_C => "OPT-RAMP-C"
•
EQUIPMENT_TYPE_ET_PSM => "PSM"
•
EQUIPMENT_TYPE_ET_WBE_21 => "E1-21-DS3-E3-3"
•
EQUIPMENT_TYPE_ET_WBE_63 => "E1-63-DS3-E3-3"
•
EQUIPMENT_TYPE_ET_XP_4_10G => "OTU2-XP"
EQUIPMENT_TYPE is used in the following commands:
•
CHG-EQPT
•
ENT-EQPT
ETH_AISACTION
The following ETH_AISACTION enum items are added:
•
ETH_AISACTION_NONE => "AIS-NONE"
•
ETH_AISACTION_PROPAGATION => "AIS-PROPAGATION"
•
ETH_AISACTION_SQUELCH => "AIS-SQUELCH"
ETH_AISACTION is used in the following commands:
•
ED-L2-ETH
ETH_IGMPROUTER
The following ETH_IGMPROUTER enum items are added:
•
ETH_IGMPROUTER_NONE => "NONE"
•
ETH_IGMPROUTER_STATIC => "STATIC"
ETH_IGMPROUTER is used in the following commands:
•
ED-L2-ETH
ETH_INGRESSCOS
The following ETH_INGRESSCOS enum items are added:
•
ETH_INGRESSCOS_0 => "0"
•
ETH_INGRESSCOS_1 => "1"
•
ETH_INGRESSCOS_2 => "2"
•
ETH_INGRESSCOS_3 => "3"
•
ETH_INGRESSCOS_4 => "4"
•
ETH_INGRESSCOS_5 => "5"
•
ETH_INGRESSCOS_6 => "6"
•
ETH_INGRESSCOS_7 => "7"
•
ETH_INGRESSCOS_DSCP => "DSCP"
•
ETH_INGRESSCOS_TRUST => "TRUST"
•
ETH_INGRESSCOS_VLAN => "VLAN"
ETH_INGRESSCOS is used in the following commands:
•
ED-L2-ETH
•
ED-QNQ-ETH
•
ENT-QNQ-ETH
•
RTRV-QNQ-ETH
ETH_PROTACTION
The following ETH_PROTACTION enum items are added:
•
ETH_PROTACTION_NONE => "PROT-NONE"
•
ETH_PROTACTION_SQUELCH => "PROT-SQUELCH"
ETH_PROTACTION is used in the following commands:
•
ED-L2-ETH
ETH_RULE
The following ETH_RULE enum items are added:
•
ETH_RULE_DOUBLE_ADD => "DOUBLE-ADD"
•
ETH_RULE_XLTE_ADD => "XLTE-ADD"
ETH_RULE is used in the following commands:
•
ED-QNQ-ETH
•
ENT-QNQ-ETH
•
RTRV-QNQ-ETH
ETH_VLANALM
The following ETH_VLANALM enum items are added:
•
ETH_VLANALM_AIS => "VLAN-AIS"
•
ETH_VLANALM_NONE => "NONE"
ETH_VLANALM is used in the following commands:
•
RTRV-VLAN-ETH
MOD1PAYLOA
The following MOD1PAYLOAD enum items are added:
•
MOD1PAYLOAD_E3 => "E3"
MOD2
The following MOD2 enum items are added:
•
MOD2_M2_RAMAN => "RAMAN"
MOD2 is used in the following commands:
•
RTRV-FFP
•
RTRV-NE-APC
•
RTRV-NE-WDMANS
•
RTRV-PMSCHED-ALL
•
RTRV-PMSCHED-MOD2
•
RTRV-TRC-MOD2
•
RTRV-TRC-OCH
MTU_TYPE
The following MTU_TYPE enum items added:
•
MTU_64 => "64"
•
MTU_9700 => "9700"
MTU_TYPE is used in the following commands:
•
ED-GIGE
OSIMODE
The following OSIMODE enum items are added:
•
AITS => "AITS"
•
UITS => "UITS"
OSIMODE is used in the following commands:
•
ED-LAPD
•
RTRV-LAPD
Note
In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.
OSIRIB
The following OSIRIB enum items are added:
•
ES_IS => "ESIS"
•
IS_IS => "ISIS"
OSIRIB is used in the following commands:
•
RTRV-OSIRIB
Note
In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.
OSIROLE
The following OSIROLE enum items are added:
•
NETWORK => "NW"
•
USER => "USR"
OSIROLE is used in the following commands:
•
ED-LAPD
•
RTRV-LAPD
Note
In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.
OSISUBNET
The following OSISUBNET enum items are added:
•
GCC => "GCC"
•
INTERNAL => "INT"
•
LAN => "LAN"
•
LDCC => "LDCC"
•
OSC => "OSC"
•
SDCC => "SDCC"
OSISUBNET is used in the following commands:
•
RTRV-OSIRIB
Note
In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.
OSI_LEVEL
The following OSI_LEVEL enum items are added:
•
LEVEL1 => "L1"
•
LEVEL2 => "L2"
OSI_LEVEL is used in the following commands:
•
DLT-MAT
•
ED-MAT
•
RTRV-MAT
Note
In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.
OSI_ROUTING_MODE
The following OSI_ROUTING_MODE enum items are added:
•
ES => "ES"
•
IS1 => "IS1"
•
IS2 => "IS2"
OSI_ROUTING_MODE is used in the following commands:
•
ED-NE-GEN
•
RTRV-NE-GEN
Note
In Software Release 9.0, OSI TL1 parameters/enum are not supported in commands.
PAYLOAD_MAPPING
The following PAYLOAD_MAPPING enum items are added:
•
PAYLOAD_MAPPING_NOFIXEDSTUFF => "NOOPU2FIXEDSTUFF"
PAYLOAD_MAPPING is used in the following commands:
•
ED-OTU2
•
RTRV-OTU2
PRODUCT_TYPE
The following PRODUCT_TYPE enum items are added:
•
PRODUCT_TYPE_NE_15310_MA_SDH => "ONS15310-MA-SDH"
PRODUCT_TYPE is used in the following commands:
•
RTRV-MAP-NETWORK
PROTTYPE
The following PROTTYPE enum items are added:
•
PROTTYPE_PRT_ONEPLUSONEL2 => "ONEPLUSONEL2"
PROTTYPE is used in the following commands:
•
ENT-FFP-MOD2
•
RTRV-FFP
SLV_TYPE
The following SLV_TYPE enum items added:
•
SLV_TYPE_ACTIVE_CHANNEL => "ACTIVE-CHANNEL"
•
SLV_TYPE_OSC => "OSC"
Related Documentation
Release-Specific Documents
•
Release Notes for the Cisco ONS 15454 SDH, Release 9.0
•
Release Notes for the Cisco ONS 15310-CL, Release 9.0
•
Release Notes for the Cisco ONS 15310-MA, Release 9.0
•
Release Notes for the Cisco ONS 15310-MA SDH, Release 9.0
•
Release Notes for the Cisco ONS 15600, Release 9.0
•
Release Notes for the Cisco ONS 15600 SDH, Release 9.0
•
Cisco ONS 15310-CL Software Upgrade Guide, Release 9.0
Platform-Specific Documents
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
Provides installation, turn up, test, and maintenance procedures•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual
Provides technical reference information for SONET/SDH cards, nodes, and networks•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
Provides a list of SONET alarms and troubleshooting procedures, general troubleshooting information, and hardware replacement procedures•
Cisco ONS SONET TL1 Command Guide
Provides a comprehensive list of TL1 commandsObtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.
Feedback