Cisco IOS Wide-Area Networking Configuration Guide, Release 12.2SR

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Find Matches in This Book

Results

Updated:: January 14, 2008

Book Table of Contents

Notes

This configuration guide contains Cisco IOS features that are supported in many different software release trainsand on many different platforms. Some of the features that are included in this configuration guide may not besupported in your Cisco IOS software release train. This configuration guide may contain information that is notspecific to a particular platform or release; however, platform differences and feature release information areincluded in this guide.

Some configuration guides contain content that may be superseded by documentation from alater release. For example, new feature content introduced in Release 12.4 or Release 12.2SR could supersedeconfiguration content that is based on Release 12.2.

Any Internet Protocol (IP) addresses used in this guide arenot intended to be actual addresses. Any examples, configuration sample output, and figures included in this guide areshown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional andcoincidental.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)