Security Configuration Guide: Unicast Reverse Path Forwarding, Cisco IOS Release 12.2SX
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 28, 2011
Book Table of Contents
- Configuring Unicast Reverse Path Forwarding
- Unicast Reverse Path Forwarding Loose Mode
- CISCO-IP-URPF-MIB Support
Notes
The Cisco software feature documentation in this configuration guide often includes information about features that are shared across software releases and platforms. This guide may contain information that is not specific to your particular platform or is not supported in your software release. Additionally, some configuration guides contain content that may be superseded by documentation from a later software release.
For the latest feature information and caveats, see the release notes for your platform and software release. Additionally, use Cisco Feature Navigator to find information about feature, platform, and software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Recommended Reading:
- About Cisco IOS Software Documentation
- Using the Command-Line Interface in Cisco IOS Software
- Cisco IOS Security Command Reference
Browse all support information for Cisco IOS Release 12.2SX , or select another product.
Complete book-level PDFs are generated periodically and therefore may not reflect the latest updates to documentation as contained in the chapter-level HTML or PDF documents.
Feedback