-
Asynchronous Transfer Mode Configuration Guide, Cisco IOS Release 15M&T
-
Configuring ATM
-
AAL1 CES on AIM-ATM
-
DHCP Client on WAN Interfaces
-
Lossless Compression and ATM Cell Switching and BITS Clocking
-
ATM Multilink PPP Support on Multiple VCs
-
ATM OAM Support for F5 Continuity Check
-
ATM OAM Ping
-
ATM Policing by Service Category for SVC SoftPVC
-
Configuring ATM SNMP Trap and OAM Enhancements
-
ATM SVC Troubleshooting Enhancements
-
ATM Software Segmentation and Reassembly
-
Unspecified Bit Rate Plus and ATM Enhancements
-
Enhanced Voice and QoS for ADSL and G.SHDSL
-
End of Life for Multiprotocol over ATM
-
Multiprotocol over ATM Overview
-
Configuring the Multiprotocol over ATM Client
-
Configuring the Multiprotocol over ATM Server
-
Configuring Token Ring LAN Emulation MPOA
-
MPLS Diff-Serv-aware Traffic Engineering over ATM
-
End of Life for LAN Emulation
-
LAN Emulation Overview
-
Configuring LAN Emulation
-
Configuring Token Ring LAN Emulation
-
SNMP Trap Support for the Virtual Switch Interface Master MIB
-
VLAN 0 Priority Tagging Support
-
Preserve 802.1Q Tagging with 802.1P Marking over ATM PVCs for xDSL Uplinks
-
Reuse MAC for ATM Route-Bridge Encapsulation
-
Feedback
Contents
End of Life for LAN Emulation
Support for LAN emulation (LANE) feature and commands has been removed in Cisco IOS Release 15.1M and later releases. This change marks the end of life for LAN emulation.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Removal of Support for LAN Emulation Feature
The following LAN Emulation feature is obsolete and is no longer available from Cisco IOS Release 15.1M and later releases:
Removal of Support for LAN Emulation Commands
The following commands are obsolete and are no longer available from Cisco IOS Release 15.1M and later releases (no replacement commands are provided):
- debug atm bus
- debug lane client
- debug lane config
- debug lane finder
- debug lane server
- debug lane signaling
- lane auto-config-atm-address
- lane bus-atm-address
- lane client
- lane client-atm-address
- lane client flush
- lane client mpoa client name
- lane client mpoa server name
- lane config-atm-address
- lane config database
- lane database
- lane fixed-config-atm-address
- lane fssrp
- lane global-lecs-address
- lane le-arp
- lane server-atm-address
- lane server-bus
- show lane
- show lane bus
- show lane client
- show lane config
- show lane database
- show lane default-atm-addresses
- show lane le-arp
- show lane neighbor
- show lane qos database
- show lane server
Additional References
Related Documents
Technical Assistance
|
Description |
Link |
|---|---|
|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information for End of Life for LAN Emulation
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.